Skip to contentSkip to conversation

Question about system halts caused by temperature

DISCUSSION Dirk Gouders 1 participant 2 messages Sep 11

lore
Share & tools
lore
#0 lore raw

Hi,

just a short question, if I maybe have a test-case that is of interest to you:

since I own newer hardware (Lenovo L14 Gen 5, AMD Ryzen 7), I suffer from system halts during system rebuilds (I use Gentoo).

I now found a reliable reproducer (emerging webkit-gtk) and a setting that helps the system to survive such a build but that setting works with perhaps very conservative frequencies and from what I read in
https://docs.kernel.org/admin-guide/pm/cpufreq.html, even with /sys/devices/system/cpu/cpufreq/boost turned on, the kernel aims to try to not let the system overheat. Could well be that I misunderstand that...

Thanks for your time,

Dirk

#1 lore raw
Quoted 10 lines · Dirk Gouders

since I own newer hardware (Lenovo L14 Gen 5, AMD Ryzen 7), I suffer from system halts during system rebuilds (I use Gentoo).

I now found a reliable reproducer (emerging webkit-gtk) and a setting that helps the system to survive such a build but that setting works with perhaps very conservative frequencies and from what I read in
https://docs.kernel.org/admin-guide/pm/cpufreq.html, even with /sys/devices/system/cpu/cpufreq/boost turned on, the kernel aims to try to not let the system overheat. Could well be that I misunderstand that...

I'm sorry for the noise about a seemingly well known problem.

(My previous hardware also was a Thinkpad L14 and that worked out of the box for some years, so I thought I hit some new problem. And when I tried the powersave governor that let the system heat raise to death while the fan speed remained at 3000 RPM I got really confused.)

I digged some more, found *thinkfan* and currently, webkit-gtk is being built with performance profile at around (hopefully safe) 84℃.

Regards,

Dirk