Skip to contentSkip to conversation

memstick - old Memory Sticks not recognized

DISCUSSION Mantas M. 2 participants 3 messages Nov 3, 2011 – Nov 4, 2011

lore
Share & tools
lore

Mantas M.

author
#0 lore raw

I have a few Sony Memory Stick cards laying around, and tried to use them with my laptop's card reader. Unfortunately, while the reader seems to recognize all cards, Linux does not -- only the "Memory Stick Pro" series one is recognized as a mountable block device. The other two, from the original "Memory Stick" series, are not. (They work fine in a camera, however.)

Ideas? Patches?

Linux 3.1.0-09034-g70c9f18.

Signature · 1 line
Mantas M.

(card inserted)

[  871.210930] jmb38x_ms 0000:05:00.3: irq_status = 00000008
[  871.210934] jmb38x_ms 0000:05:00.3: media changed
[  871.210951] memstick_host memstick0: memstick_check started
[  871.223747] jmb38x_ms 0000:05:00.3: power on
[  871.223754] jmb38x_ms 0000:05:00.3: Set Host Interface Mode to 0
[  871.223770] jmb38x_ms 0000:05:00.3: tasklet req 0
[  871.223777] memstick_host memstick0: control 000540c7
[  871.223782] memstick_host memstick0: status 00000000
[  871.223787] memstick_host memstick0: hstatus 00000600
[  871.223794] memstick_host memstick0: executing TPC 00080004, len 4
[  871.223853] jmb38x_ms 0000:05:00.3: irq_status = 00000001
[  871.223859] memstick_host memstick0: c control 000544c7
[  871.223863] memstick_host memstick0: c status 00000000
[  871.223868] memstick_host memstick0: c hstatus 00000600
[  871.223892] jmb38x_ms 0000:05:00.3: tasklet req 0
[  871.223898] memstick_host memstick0: control 000540c7
[  871.223901] memstick_host memstick0: status 00000000
[  871.223905] memstick_host memstick0: hstatus 00000600
[  871.223909] memstick_host memstick0: executing TPC 00044004, len 4
[  871.224000] jmb38x_ms 0000:05:00.3: irq_status = 00000001
[  871.224011] memstick_host memstick0: c control 000544c7
[  871.224017] memstick_host memstick0: c status 00000000
[  871.224022] memstick_host memstick0: c hstatus 00000600
[  871.224031] memstick memstick0: if_mode = 00
[  871.224046] memstick_host memstick0: new card 00, 00, 00
[  871.224146] memstick_host memstick0: memstick_check finished
(card removed)
[  915.857652] jmb38x_ms 0000:05:00.3: irq_status = 00000010
[  915.857657] jmb38x_ms 0000:05:00.3: media changed
[  915.857674] memstick_host memstick0: memstick_check started
[  915.857687] jmb38x_ms 0000:05:00.3: tasklet req 0
[  915.857692] memstick_host memstick0: no media status
[  915.857695] jmb38x_ms 0000:05:00.3: tasklet req 0
[  915.857699] memstick_host memstick0: no media status
[  915.857702] jmb38x_ms 0000:05:00.3: tasklet req 0
[  915.857706] memstick_host memstick0: no media status
[  915.857710] jmb38x_ms 0000:05:00.3: tasklet req -11
[  915.857900] jmb38x_ms 0000:05:00.3: power off
[  915.857902] memstick_host memstick0: memstick_check finished

monitor will print the received events for:
UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent

KERNEL[867.357117] add /devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 (memstick)
ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 MEMSTICK_CATEGORY=00
MEMSTICK_CLASS=00
MEMSTICK_TYPE=00
SEQNUM=1990
SUBSYSTEM=memstick
UDEV_LOG=3

UDEV [867.358732] add /devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 (memstick)
ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 MEMSTICK_CATEGORY=00
MEMSTICK_CLASS=00
MEMSTICK_TYPE=00
SEQNUM=1990
SUBSYSTEM=memstick
UDEV_LOG=3
USEC_INITIALIZED=867357458

KERNEL[911.987512] remove /devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 (memstick)
ACTION=remove DEVPATH=/devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 MEMSTICK_CATEGORY=00
MEMSTICK_CLASS=00
MEMSTICK_TYPE=00
SEQNUM=1991
SUBSYSTEM=memstick
UDEV_LOG=3

UDEV [911.987833] remove /devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 (memstick)
ACTION=remove DEVPATH=/devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 MEMSTICK_CATEGORY=00
MEMSTICK_CLASS=00
MEMSTICK_TYPE=00
SEQNUM=1991
SUBSYSTEM=memstick
UDEV_LOG=3
USEC_INITIALIZED=911987557

(card inserted)

[  965.754858] jmb38x_ms 0000:05:00.3: irq_status = 00000008
[  965.754863] jmb38x_ms 0000:05:00.3: media changed
[  965.754880] memstick_host memstick0: memstick_check started
[  965.768051] jmb38x_ms 0000:05:00.3: power on
[  965.768058] jmb38x_ms 0000:05:00.3: Set Host Interface Mode to 0
[  965.768074] jmb38x_ms 0000:05:00.3: tasklet req 0
[  965.768082] memstick_host memstick0: control 000540c7
[  965.768087] memstick_host memstick0: status 00000000
[  965.768091] memstick_host memstick0: hstatus 00001600
[  965.768098] memstick_host memstick0: executing TPC 00080004, len 4
[  965.768154] jmb38x_ms 0000:05:00.3: irq_status = 00000001
[  965.768160] memstick_host memstick0: c control 000544c7
[  965.768165] memstick_host memstick0: c status 00000000
[  965.768170] memstick_host memstick0: c hstatus 00001600
[  965.768194] jmb38x_ms 0000:05:00.3: tasklet req 0
[  965.768204] memstick_host memstick0: control 000540c7
[  965.768207] memstick_host memstick0: status 00000000
[  965.768211] memstick_host memstick0: hstatus 00001600
[  965.768215] memstick_host memstick0: executing TPC 00044004, len 4
[  965.768304] jmb38x_ms 0000:05:00.3: irq_status = 00000001
[  965.768315] memstick_host memstick0: c control 000544c7
[  965.768320] memstick_host memstick0: c status 00000000
[  965.768325] memstick_host memstick0: c hstatus 00001600
[  965.768334] memstick memstick0: if_mode = 00
[  965.768350] memstick_host memstick0: new card 00, 00, 00
[  965.768447] memstick_host memstick0: memstick_check finished
(card removed)
[  970.235117] jmb38x_ms 0000:05:00.3: irq_status = 00000010
[  970.235121] jmb38x_ms 0000:05:00.3: media changed
[  970.235139] memstick_host memstick0: memstick_check started
[  970.235152] jmb38x_ms 0000:05:00.3: tasklet req 0
[  970.235157] memstick_host memstick0: no media status
[  970.235160] jmb38x_ms 0000:05:00.3: tasklet req 0
[  970.235165] memstick_host memstick0: no media status
[  970.235167] jmb38x_ms 0000:05:00.3: tasklet req 0
[  970.235171] memstick_host memstick0: no media status
[  970.235175] jmb38x_ms 0000:05:00.3: tasklet req -11
[  970.235334] jmb38x_ms 0000:05:00.3: power off
[  970.235339] memstick_host memstick0: memstick_check finished

monitor will print the received events for:
UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent

KERNEL[961.897152] add /devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 (memstick)
ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 MEMSTICK_CATEGORY=00
MEMSTICK_CLASS=00
MEMSTICK_TYPE=00
SEQNUM=1992
SUBSYSTEM=memstick
UDEV_LOG=3

UDEV [961.898702] add /devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 (memstick)
ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 MEMSTICK_CATEGORY=00
MEMSTICK_CLASS=00
MEMSTICK_TYPE=00
SEQNUM=1992
SUBSYSTEM=memstick
UDEV_LOG=3
USEC_INITIALIZED=961897429

KERNEL[966.364672] remove /devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 (memstick)
ACTION=remove DEVPATH=/devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 MEMSTICK_CATEGORY=00
MEMSTICK_CLASS=00
MEMSTICK_TYPE=00
SEQNUM=1993
SUBSYSTEM=memstick
UDEV_LOG=3

UDEV [966.364936] remove /devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 (memstick)
ACTION=remove DEVPATH=/devices/pci0000:00/0000:00:1c.5/0000:05:00.3/memstick_host/memstick0/memstick0 MEMSTICK_CATEGORY=00
MEMSTICK_CLASS=00
MEMSTICK_TYPE=00
SEQNUM=1993
SUBSYSTEM=memstick
UDEV_LOG=3
USEC_INITIALIZED=966364672

author
#1 lore raw

What I forgot to add:

* The card reader is listed in lspci as:
05:00.3 System peripheral: JMicron Technology Corp. MS Host
Controller (rev 80)

* The laptop is Asus K52JT.

* The working card is actually Memory Stick Pro Duo, not Pro, but either way it works.

* Standard Arch Linux kernel configuration (plus CONFIG_MEMSTICK_DEBUG, which I hoped would give me some clues).

Signature · 1 line
Mantas M.
#2 lore raw

At Thu, 03 Nov 2011 21:41:15 +0200,

Quoted 7 lines · Mantas M.

What I forgot to add:

* The card reader is listed in lspci as:
05:00.3 System peripheral: JMicron Technology Corp. MS Host
Controller (rev 80)

Quoted 7 lines

* The laptop is Asus K52JT.

* The working card is actually Memory Stick Pro Duo, not Pro, but either way it works.

* Standard Arch Linux kernel configuration (plus CONFIG_MEMSTICK_DEBUG, which I hoped would give me some clues).

The patches for old memsticks have been posted, but not merged because of hackish implementation details. You can give it a try. See https://lkml.org/lkml/2011/3/3/518

Takashi