Skip to contentSkip to conversation

discrepency between "df" and "du" on tmpfs filesystem?

DISCUSSION Christopher Friesen 3 participants 3 messages Dec 1, 2005

lore
Share & tools
lore
#0 lore raw

Someone noticed this on one of our machines. The rootfs is a 256MB tmpfs filesystem. Depending on how you check the size, you get two different answers.

[email protected]:/root> df -hl

Filesystem            Size  Used Avail Use% Mounted on
rootfs                256M  250M  6.4M  98% /
none                   32M  116K   32M   1% /tmp

[email protected]:/root> df -kl
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 262144 255684 6460 98% /
none 32768 116 32652 1% /tmp

[email protected]:/root> du -sxk /
204672 /

[email protected]:/root> du -sxh /
200M /

Anyone know what's going on?

Chris

#1 lore raw
Quoted 5 lines · Christopher Friesen

Someone noticed this on one of our machines. The rootfs is a 256MB tmpfs filesystem. Depending on how you check the size, you get two different answers.

Quoted 7 lines

[email protected]:/root> df -kl
rootfs 262144 255684 6460 98% /

[email protected]:/root> du -sxk /
204672 /

Anyone know what's going on?

df tells you what the filesystem says is in use or free, via statfs. du goes looking at the contents of the filesystem, totalling stats. Any files unlinked but held open will be counted by df but not by du. There might also be a discrepancy over indirect blocks, I'm not sure.

Hugh

#2 lore raw
Quoted 12 lines · Hugh Dickins
Quoted 11 lines · Christopher Friesen

Someone noticed this on one of our machines. The rootfs is a 256MB tmpfs filesystem. Depending on how you check the size, you get two different answers.

[email protected]:/root> df -kl
rootfs 262144 255684 6460 98% /

[email protected]:/root> du -sxk /
204672 /

Quoted 6 lines
Quoted 1 line

Anyone know what's going on?

df tells you what the filesystem says is in use or free, via statfs. du goes looking at the contents of the filesystem, totalling stats. Any files unlinked but held open will be counted by df but not by du. There might also be a discrepancy over indirect blocks, I'm not sure.

Also an empty filesystem usually does not have zero use, since the filesystem overhead (inode table, etc) may be accounted in the statfs counts.

Andreas.

Signature · 4 lines
Andreas Schwab, SuSE Labs, [email protected]
SuSE Linux Products GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany
PGP key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
"And now for something completely different."