btrfs on low end and high end FLASH
How well suited is btrfs to low-end and high-end FLASH devices?
Paraphrasing from a thread elsewhere:
FLASH can be categorised into two classes, which have extremely different characteristics:
(a) the low-end (USB, SDHC, CF, cheap ATA SSD);
and (b) the high-end (SAS, PCIe, NAS, expensive ATA SSD).
My own experience is that the low end (a) can have erase blocks as large as 4MBytes or more and they are easily worn out to failure. I've no idea what their page sizes might be nor what boundaries their wear levelling (if any) operate on.
Their normal mode of operation is to use a "FAT32" filesystem and to be filled up linearly with large files. I guess the more scattered layout of extN is non-too sympathetic to their normal operation.
The high-end (b) may well have 4kByte pages or smaller but they will typically operate with multiple page chunks that are much larger, where 16kBytes appear to be the optimum performance size for the devices I've seen so far.
How well does btrfs fit in with the features for those two categories?
Regards,
Martin
Quoted 9 lines · Martin
How well suited is btrfs to low-end and high-end FLASH devices?
Paraphrasing from a thread elsewhere:
FLASH can be categorised into two classes, which have extremely different characteristics:
(a) the low-end (USB, SDHC, CF, cheap ATA SSD);
A good FYI detailing low-end FLASH devices is given on:
Flash memory card design
https://wiki.linaro.org/WorkingGroups/Kernel/Projects/FlashCardSurvey
For those examples, it looks like write chunks of 32kBytes or more may well be a good idea...
Quoted 13 lines
and (b) the high-end (SAS, PCIe, NAS, expensive ATA SSD).
My own experience is that the low end (a) can have erase blocks as large as 4MBytes or more and they are easily worn out to failure. I've no idea what their page sizes might be nor what boundaries their wear levelling (if any) operate on.
Their normal mode of operation is to use a "FAT32" filesystem and to be filled up linearly with large files. I guess the more scattered layout of extN is non-too sympathetic to their normal operation.
Quoted 7 lines
The high-end (b) may well have 4kByte pages or smaller but they will typically operate with multiple page chunks that are much larger, where 16kBytes appear to be the optimum performance size for the devices I've seen so far.
How well does btrfs fit in with the features for those two categories?
Regards,
Martin