Skip to contentSkip to conversation

speaker volume gets down to 0 and muted

DISCUSSION Julian Sikorski 1 participant 3 messages Nov 17, 2012 – Nov 20, 2012

lore
Share & tools
lore
#0 lore raw

Hi,

I have recently noticed this annoying phenomenon: the speaker volume will get to 0 and muted way more often than I'd like.
I still have not figured out a 100 % reproducer but this is quite annoying. My system specs:

pulseaudio-1.1-9.fc17.x86_64
alsa-lib-1.0.26-1.fc17.x86_64
kernel-3.6.6-1.fc17.x86_64
http://www.alsa-project.org/db/?f=1707d0e40a7a1df7edc71c6c61dcae41e41a8acb

I am eager to receive info on how to debug this further.

Best regards,
Julian

#1 lore raw

Re: speaker volume gets down to 0 and muted upon boot

W dniu 17.11.2012 17:55, Julian Sikorski pisze:

Quoted 12 lines

Hi,

I have recently noticed this annoying phenomenon: the speaker volume will get to 0 and muted way more often than I'd like.
I still have not figured out a 100 % reproducer but this is quite annoying. My system specs:

pulseaudio-1.1-9.fc17.x86_64
alsa-lib-1.0.26-1.fc17.x86_64
kernel-3.6.6-1.fc17.x86_64
http://www.alsa-project.org/db/?f=1707d0e40a7a1df7edc71c6c61dcae41e41a8acb

Quoted 5 lines

I am eager to receive info on how to debug this further.

Best regards,
Julian

Well, it was easier than I thought. Volume=0 and muted is the state the machine boots in.

Julian

#2 lore raw

Re: speaker volume gets down to 0 and muted upon boot

W dniu 17.11.2012 18:23, Julian Sikorski pisze:

Quoted 15 lines

W dniu 17.11.2012 17:55, Julian Sikorski pisze:

Quoted 14 lines

Hi,

I have recently noticed this annoying phenomenon: the speaker volume will get to 0 and muted way more often than I'd like.
I still have not figured out a 100 % reproducer but this is quite annoying. My system specs:

pulseaudio-1.1-9.fc17.x86_64
alsa-lib-1.0.26-1.fc17.x86_64
kernel-3.6.6-1.fc17.x86_64
http://www.alsa-project.org/db/?f=1707d0e40a7a1df7edc71c6c61dcae41e41a8acb

I am eager to receive info on how to debug this further.

Quoted 8 lines
Quoted 3 lines

Best regards,
Julian

Well, it was easier than I thought. Volume=0 and muted is the state the machine boots in.

Julian

It was pulseaudio's fault, sorry for the noise.

Julian