Skip to contentSkip to conversation

git-svn "Temp file with moniker 'svn_delta' already in use" and skelta mode

DISCUSSION David Rothenberger 2 participants 7 messages Jun 15, 2016

lore
Share & tools
lore
#0 lore raw

I recently upgraded my Subversion server to 1.8.0 and started receiving the following error from "git svn fetch":

Temp file with moniker 'svn_delta' already in use at /usr/lib/perl5/vendor_perl/5.10/Git.pm line 1024.

This occurs only when using an http:// URL; svn:// URLs work fine.

I think this is related to skelta mode [1] with serf. When I add "SVNAllowBulkUpdates Prefer" to mod_dav configuration, the error goes away. (Similarly, if I add "http-bulk-updates = yes" to ~/.subversion/servers.)

The server is running WanDisco's 1.8.0 distribution on 64-bit Debian 7.0. The client is Cygwin: svn version 1.8.0 and git version 1.8.3.2.

I initially reported this to the subversion users mailing list, but was (not so politely) told to report this to the git-svn authors. I'm not so sure, since the problem goes away simply by downgrading the subversion-perl bindings back to 1.7.

[1] http://subversion.apache.org/docs/release-notes/1.8.html#serf-skelta-default

Signature · 4 lines
David Rothenberger  ----  [email protected]

Teutonic:
        Not enough gin.
#1 lore raw
Quoted 6 lines · David Rothenberger

I recently upgraded my Subversion server to 1.8.0 and started receiving the following error from "git svn fetch":

Temp file with moniker 'svn_delta' already in use at /usr/lib/perl5/vendor_perl/5.10/Git.pm line 1024.

This occurs only when using an http:// URL; svn:// URLs work fine.

[snip]

Quoted 2 lines

The client is Cygwin: svn version 1.8.0 and git version 1.8.3.2.

The subversion 1.8 release has removed the neon library, all svn client http access now always goes through the serf library. If you put "http-library = serf" in the "[global]" section of the "~/.subversion/servers" file you will get the 'svn_delta' error with git-svn when running earlier versions of the svn client as well.

Quoted 4 lines

I initially reported this to the subversion users mailing list, but was (not so politely) told to report this to the git-svn authors. I'm not so sure, since the problem goes away simply by downgrading the subversion-perl bindings back to 1.7.

That changes the default http client access back to neon which doesn't exhibit the problem. Adding "http-library = serf" as described above will make the problem reappear with the 1.7 subversion-perl bindings (and the 1.6 as well).

Kyle

#2 lore raw
Quoted 9 lines · Kyle McKay
Quoted 7 lines · David Rothenberger

I recently upgraded my Subversion server to 1.8.0 and started receiving the following error from "git svn fetch":

Temp file with moniker 'svn_delta' already in use at /usr/lib/perl5/vendor_perl/5.10/Git.pm line 1024.

This occurs only when using an http:// URL; svn:// URLs work fine.

[snip]

Quoted 8 lines
Quoted 2 lines

The client is Cygwin: svn version 1.8.0 and git version 1.8.3.2.

The subversion 1.8 release has removed the neon library, all svn client http access now always goes through the serf library. If you put "http-library = serf" in the "[global]" section of the "~/.subversion/servers" file you will get the 'svn_delta' error with git-svn when running earlier versions of the svn client as well.

That was not my experience. I did try this with the 1.7 perl bindings and libraries and with "http-library = serf" in by servers and it worked fine. I confirmed that serf was being used with a Wireshark trace.

Signature · 4 lines
David Rothenberger  ----  [email protected]

To downgrade the human mind is bad theology.
                -- C. K. Chesterton
#3 lore raw
Quoted 19 lines · David Rothenberger
Quoted 9 lines · Kyle McKay
Quoted 7 lines · David Rothenberger

I recently upgraded my Subversion server to 1.8.0 and started receiving the following error from "git svn fetch":

Temp file with moniker 'svn_delta' already in use at /usr/lib/perl5/vendor_perl/5.10/Git.pm line 1024.

This occurs only when using an http:// URL; svn:// URLs work fine.

[snip]

Quoted 8 lines
Quoted 2 lines

The client is Cygwin: svn version 1.8.0 and git version 1.8.3.2.

The subversion 1.8 release has removed the neon library, all svn client http access now always goes through the serf library. If you put "http-library = serf" in the "[global]" section of the "~/.subversion/servers" file you will get the 'svn_delta' error with git-svn when running earlier versions of the svn client as well.

Quoted 3 lines

That was not my experience. I did try this with the 1.7 perl bindings and libraries and with "http-library = serf" in by servers and it worked fine. I confirmed that serf was being used with a Wireshark trace.

I had it always fail right away from my home ISP (kinda slow connection), but when running on a host with quite a different internet connection it would sometimes run for a while before generating the error (maybe a couple hundred revisions fetched) for some sources, but it would *always* eventually fail.

For this reason I also believe the problem is timing sensitive.

Try doing "git svn clone --quiet http://dev.heuristiclab.com/svn/hl/core" with "~/.subversion/servers" section "[global]" including "http_library = serf". I find this one always seems to fail right away for me with git-svn over serf but will clone fine over neon (if you can stand to wait long enough).

I have been looking into using serf for git-svn clones ever since I discovered how very much faster snvrdump works on an http url over serf as compared to neon.

Kyle

#4 lore raw
Quoted 30 lines · Kyle McKay
Quoted 19 lines · David Rothenberger
Quoted 9 lines · Kyle McKay
Quoted 7 lines · David Rothenberger

I recently upgraded my Subversion server to 1.8.0 and started receiving the following error from "git svn fetch":

Temp file with moniker 'svn_delta' already in use at /usr/lib/perl5/vendor_perl/5.10/Git.pm line 1024.

This occurs only when using an http:// URL; svn:// URLs work fine.

[snip]

Quoted 8 lines
Quoted 2 lines

The client is Cygwin: svn version 1.8.0 and git version 1.8.3.2.

The subversion 1.8 release has removed the neon library, all svn client http access now always goes through the serf library. If you put "http-library = serf" in the "[global]" section of the "~/.subversion/servers" file you will get the 'svn_delta' error with git-svn when running earlier versions of the svn client as well.

Quoted 3 lines

That was not my experience. I did try this with the 1.7 perl bindings and libraries and with "http-library = serf" in by servers and it worked fine. I confirmed that serf was being used with a Wireshark trace.

I had it always fail right away from my home ISP (kinda slow connection), but when running on a host with quite a different internet connection it would sometimes run for a while before generating the error (maybe a couple hundred revisions fetched) for some sources, but it would *always* eventually fail.

Quoted 7 lines

For this reason I also believe the problem is timing sensitive.

Try doing "git svn clone --quiet
http://dev.heuristiclab.com/svn/hl/core" with "~/.subversion/servers" section "[global]" including "http_library = serf". I find this one always seems to fail right away for me with git-svn over serf but will clone fine over neon (if you can stand to wait long enough).

Yes, you're right. That one fails for me too with 1.7, although I note that the server itself is running 1.5. Still, the reason is the same -- a non-depth-first drive of the delta editor from serf.

Signature · 4 lines
David Rothenberger  ----  [email protected]

"If Diet Coke did not exist it would have been necessary to invent it."
                -- Karl Lehenbauer
#5 lore raw
In reply to David Rothenberger
Quoted 6 lines · David Rothenberger

I recently upgraded my Subversion server to 1.8.0 and started receiving the following error from "git svn fetch":

Temp file with moniker 'svn_delta' already in use at /usr/lib/perl5/vendor_perl/5.10/Git.pm line 1024.

This occurs only when using an http:// URL; svn:// URLs work fine.

I traced git-svn and discovered that the error is due to a known problem in the SVN APIs. ra_serf does not drive the delta editor in a depth-first manner as required by the API [1]. Instead, the calls come in this order:

1. open_root
2. open_directory
3. add_file
4. apply_textdelta
5. add_file
6. apply_textdelta

This is a known issue [2] and one that the Subversion folks have elected not to fix [3].

[1]
http://subversion.apache.org/docs/api/latest/structsvn__delta__editor__t.html#details
[2] http://subversion.tigris.org/issues/show_bug.cgi?id=2932
[3] http://subversion.tigris.org/issues/show_bug.cgi?id=3831

Signature · 4 lines
David Rothenberger  ----  [email protected]

management, n.:
        The art of getting other people to do all the work.
#6 lore raw
Quoted 7 lines · David Rothenberger
Quoted 6 lines · David Rothenberger

I recently upgraded my Subversion server to 1.8.0 and started receiving the following error from "git svn fetch":

Temp file with moniker 'svn_delta' already in use at /usr/lib/perl5/vendor_perl/5.10/Git.pm line 1024.

This occurs only when using an http:// URL; svn:// URLs work fine.

I have created a patch (separate emails) that seems to work. However, if the server being fetched against is not configured well for use with serf then "Error retrieving REPORT (54): Connection reset by peer Git/SVN/Ra.pm line 282" errors can occur and/or the fetch can be horribly slow compared to using neon. If the "Connection reset" error occurs, the fetch can be restarted to get more revisions until it dies again.

Kyle