Problems with postinstall
Hi
I am desperately trying to get some postinstall scripts working. They should replace some defualt files with custom files I have. They are all in one package. The package looks like this:
do_install() {
install -d ${D}${sbindir}
install -m 0700 ${S}/sbin/* ${D}${sbindir}
install -d ${D}${bindir}
install -m 0755 ${S}/bin/LEDstatus ${D}${bindir}
install -d ${D}/etc/udev/rules.d
install -m 0644 ${S}/udev/* ${D}/etc/udev/rules.d/
install -d ${D}/etc/ssh
install -m 0600 ${S}/ssh/ssh_* ${D}/etc/ssh/
install -m 0644 ${S}/ssh/authorized_keys ${D}/etc/ssh/
install -d ${D}/etc/gnupg
install -m 0600 ${S}/gnupg/trustedkeys.gpg ${D}/etc/gnupg/
}# Overwrite some configuration data with specific files
pkg_postinst_${PN} () {
install -o root -g root -m 0600 ${S}/ssh/sshd_config ${D}/etc/ssh/
install -m 0755 ${S}/etc/rc.local ${D}/etc/
install -m 0644 ${S}/etc/watchdog.conf ${D}/etc/
install -m 0400 ${S}/etc/shadow ${D}/etc/
install -m 0440 ${S}/etc/sudoers ${D}/etc/
install -d ${D}/etc/default
install -o root -g root -m 0644 ${S}/etc/default-ntpdate${D}/etc/default/ntpdate
}
RDEPENDS_${PN} += "ntpdate udev ssh sudo"
FILES_${PN} += "/*"
I even tried changing the ownership of the files, but that did not change aything.
Am I doing this completely wrong?
Thanks for any hints
Michael
Nobody using any postinstalls?
I am still wondering why the postinstall does not work. I don't get any error messages. The files are just not installed.
Am 05.06.2014 12:44, schrieb Neuer User:
Quoted 50 lines
Hi
I am desperately trying to get some postinstall scripts working. They should replace some defualt files with custom files I have. They are all in one package. The package looks like this:
do_install() { install -d ${D}${sbindir} install -m 0700 ${S}/sbin/* ${D}${sbindir} install -d ${D}${bindir} install -m 0755 ${S}/bin/LEDstatus ${D}${bindir} install -d ${D}/etc/udev/rules.d install -m 0644 ${S}/udev/* ${D}/etc/udev/rules.d/ install -d ${D}/etc/ssh install -m 0600 ${S}/ssh/ssh_* ${D}/etc/ssh/ install -m 0644 ${S}/ssh/authorized_keys ${D}/etc/ssh/ install -d ${D}/etc/gnupg install -m 0600 ${S}/gnupg/trustedkeys.gpg ${D}/etc/gnupg/ }# Overwrite some configuration data with specific files
pkg_postinst_${PN} () { install -o root -g root -m 0600 ${S}/ssh/sshd_config ${D}/etc/ssh/ install -m 0755 ${S}/etc/rc.local ${D}/etc/ install -m 0644 ${S}/etc/watchdog.conf ${D}/etc/ install -m 0400 ${S}/etc/shadow ${D}/etc/ install -m 0440 ${S}/etc/sudoers ${D}/etc/ install -d ${D}/etc/default install -o root -g root -m 0644 ${S}/etc/default-ntpdate${D}/etc/default/ntpdate
}RDEPENDS_${PN} += "ntpdate udev ssh sudo"
FILES_${PN} += "/*"
I even tried changing the ownership of the files, but that did not change aything.
Am I doing this completely wrong?
Thanks for any hints
Michael
Quoted 5 lines · Neuer User
Nobody using any postinstalls?
I am still wondering why the postinstall does not work. I don't get any error messages. The files are just not installed.
I usually leave things more than a day before sending a ping email, people can be busy but usually you'll get replies within a couple of days on this list.
Quoted 13 lines
Quoted 10 lines
# Overwrite some configuration data with specific files
pkg_postinst_${PN} () { install -o root -g root -m 0600 ${S}/ssh/sshd_config ${D}/etc/ssh/ install -m 0755 ${S}/etc/rc.local ${D}/etc/ install -m 0644 ${S}/etc/watchdog.conf ${D}/etc/ install -m 0400 ${S}/etc/shadow ${D}/etc/ install -m 0440 ${S}/etc/sudoers ${D}/etc/ install -d ${D}/etc/default install -o root -g root -m 0644 ${S}/etc/default-ntpdateQuoted 3 lines
${D}/etc/default/ntpdate
}
The postinst is executed by the package manager when the package is installed. If that installation takes place during do_rootfs, ${D} will refer to the rootfs directory for the image being built and ${S} will probably refer to something else to do with the image recipe but I'm not entirely sure on the details. If the installation takes place on the device, or the postinst is delayed until the first boot, ${D} and ${S} will not be set.
Hope this helps,
Signature · 4 lines
Paul Barker Email: [email protected] http://www.paulbarker.me.uk
Am 06.06.2014 12:54, schrieb Paul Barker:
Quoted 4 lines
I usually leave things more than a day before sending a ping email, people can be busy but usually you'll get replies within a couple of days on this list.
Sorry, I guess these 18h were driving me crazy as I don't understand why it is not working. I actually thought, it had already been working earlier...
Quoted 22 lines
Quoted 13 lines
Quoted 10 lines
# Overwrite some configuration data with specific files
pkg_postinst_${PN} () { install -o root -g root -m 0600 ${S}/ssh/sshd_config ${D}/etc/ssh/ install -m 0755 ${S}/etc/rc.local ${D}/etc/ install -m 0644 ${S}/etc/watchdog.conf ${D}/etc/ install -m 0400 ${S}/etc/shadow ${D}/etc/ install -m 0440 ${S}/etc/sudoers ${D}/etc/ install -d ${D}/etc/default install -o root -g root -m 0644 ${S}/etc/default-ntpdateQuoted 3 lines
${D}/etc/default/ntpdate
}The postinst is executed by the package manager when the package is installed. If that installation takes place during
do_rootfs, ${D} will refer to the rootfs directory for the image being built and ${S} will probably refer to something else to do with the image recipe but I'm not entirely sure on the details. If the installation takes place on the device, or the postinst is delayed until the first boot, ${D} and ${S} will not be set.
Quoted 2 lines
Hope this helps,
So, I guess there are now two possibilities:
a.) The postinstall is not done at all.
b.) The postinstall is done, but before the other packages are installed, which overwrite the files again. Is this possible? If yes, howto specify that this postinstall should really be done last of all?
Thanks a lot
Michael
Quoted 32 lines · Neuer User
Am 06.06.2014 12:54, schrieb Paul Barker:
Quoted 4 lines
I usually leave things more than a day before sending a ping email, people can be busy but usually you'll get replies within a couple of days on this list.
Sorry, I guess these 18h were driving me crazy as I don't understand why it is not working. I actually thought, it had already been working earlier...
Quoted 22 lines
Quoted 13 lines
Quoted 10 lines
# Overwrite some configuration data with specific files
pkg_postinst_${PN} () { install -o root -g root -m 0600 ${S}/ssh/sshd_config ${D}/etc/ssh/ install -m 0755 ${S}/etc/rc.local ${D}/etc/ install -m 0644 ${S}/etc/watchdog.conf ${D}/etc/ install -m 0400 ${S}/etc/shadow ${D}/etc/ install -m 0440 ${S}/etc/sudoers ${D}/etc/ install -d ${D}/etc/default install -o root -g root -m 0644 ${S}/etc/default-ntpdateQuoted 3 lines
${D}/etc/default/ntpdate
}The postinst is executed by the package manager when the package is installed. If that installation takes place during
do_rootfs, ${D} will refer to the rootfs directory for the image being built and ${S} will probably refer to something else to do with the image recipe but I'm not entirely sure on the details. If the installation takes place on the device, or the postinst is delayed until the first boot, ${D} and ${S} will not be set.
Quoted 10 lines
Quoted 2 lines
Hope this helps,
So, I guess there are now two possibilities:
a.) The postinstall is not done at all.
b.) The postinstall is done, but before the other packages are installed, which overwrite the files again. Is this possible? If yes, howto specify that this postinstall should really be done last of all?
I'm not sure if this helps, but you can specify rootfs-post-process commands in your image recipe:
setup_my_image() {
# do stuff }
ROOTFS_POSTPROCESS_COMMAND += 'setup_my_image ;'
This will run after the rootfs is created from the package installations
/Jacob
Am 06.06.2014 13:19, schrieb Jacob Kroon:
Quoted 4 lines
I'm not sure if this helps, but you can specify rootfs-post-process commands in your image recipe:
setup_my_image(){
Quoted 8 lines
# do stuff }
ROOTFS_POSTPROCESS_COMMAND+= 'setup_my_image;'This will run after the rootfs is created from the package installations
/Jacob
Thanks, that sounds like a good idea. Will try that out. :-)
Quoted 8 lines · Neuer User
Quoted 8 lines
The postinst is executed by the package manager when the package is installed. If that installation takes place during
do_rootfs, ${D} will refer to the rootfs directory for the image being built and ${S} will probably refer to something else to do with the image recipe but I'm not entirely sure on the details. If the installation takes place on the device, or the postinst is delayed until the first boot, ${D} and ${S} will not be set.
Quoted 8 lines
Quoted 2 lines
Hope this helps,
So, I guess there are now two possibilities:
a.) The postinstall is not done at all.
b.) The postinstall is done, but before the other packages are installed, which overwrite the files again. Is this possible? If yes, howto specify that this postinstall should really be done last of all?
Basically a postinstall is *not* the way of doing this. You can't control when it runs and when it does, you can't get to the files you want to install.
If the files are installed by other packages then use a bbappend to change those files. If nothing installs them already, write a recipe to install them. If there are changes that can only be done at rootfs time, then use a rootfs postproces command.
Ross
Am 06.06.2014 14:31, schrieb Burton, Ross:
Quoted 22 lines · Neuer User
Quoted 8 lines
Quoted 8 lines
The postinst is executed by the package manager when the package is installed. If that installation takes place during
do_rootfs, ${D} will refer to the rootfs directory for the image being built and ${S} will probably refer to something else to do with the image recipe but I'm not entirely sure on the details. If the installation takes place on the device, or the postinst is delayed until the first boot, ${D} and ${S} will not be set.Quoted 8 lines
Quoted 2 lines
Hope this helps,
So, I guess there are now two possibilities:
a.) The postinstall is not done at all.
b.) The postinstall is done, but before the other packages are installed, which overwrite the files again. Is this possible? If yes, howto specify that this postinstall should really be done last of all?Basically a postinstall is *not* the way of doing this. You can't control when it runs and when it does, you can't get to the files you want to install.
Quoted 7 lines
If the files are installed by other packages then use a bbappend to change those files. If nothing installs them already, write a recipe to install them. If there are changes that can only be done at rootfs time, then use a rootfs postproces command.
Ross
Thanks Ross
I guess the "rootfs postprocess command" is the way to go.
I have already separated the files into new files (which get installed as a normal install process by that package) and files that overwrite other package files.
I guess, I could for most (but not all) files add a bbappend to the relevant original package, but it would be more complicated than doing it all together at rootfs postprocess.
Thanks for all the help. I will try the rootfs postprocess today :-)
Cheers
Michael
Hi
postinstall is afaik run during installation. And that could very well be on the actual target. So ${S} etc. are not available. The step is just for steps that *need* to run on the actual target utilizing the files that where install in do_install.
Fredag den 6. juni 2014 08:16:39 skrev Neuer User:
Quoted 59 lines
Nobody using any postinstalls?
I am still wondering why the postinstall does not work. I don't get any error messages. The files are just not installed.
Am 05.06.2014 12:44, schrieb Neuer User:
Quoted 53 lines
Hi
I am desperately trying to get some postinstall scripts working. They should replace some defualt files with custom files I have. They are all in one package. The package looks like this:
do_install(){install -d ${D}${sbindir} install -m 0700 ${S}/sbin/* ${D}${sbindir} install -d ${D}${bindir} install -m 0755 ${S}/bin/LEDstatus ${D}${bindir} install -d ${D}/etc/udev/rules.d install -m 0644 ${S}/udev/* ${D}/etc/udev/rules.d/ install -d ${D}/etc/ssh install -m 0600 ${S}/ssh/ssh_* ${D}/etc/ssh/ install -m 0644 ${S}/ssh/authorized_keys ${D}/etc/ssh/ install -d ${D}/etc/gnupg install -m 0600 ${S}/gnupg/trustedkeys.gpg ${D}/etc/gnupg/}
# Overwrite some configuration data with specific files pkg_postinst_${PN} () {
install -o root -g root -m 0600 ${S}/ssh/sshd_config ${D}/etc/ssh/ install -m 0755 ${S}/etc/rc.local ${D}/etc/ install -m 0644 ${S}/etc/watchdog.conf ${D}/etc/ install -m 0400 ${S}/etc/shadow ${D}/etc/ install -m 0440 ${S}/etc/sudoers ${D}/etc/ install -d ${D}/etc/default install -o root -g root -m 0644 ${S}/etc/default-ntpdate${D}/etc/default/ntpdate
}RDEPENDS_${PN} += "ntpdate udev ssh sudo"
FILES_${PN} += "/*"
I even tried changing the ownership of the files, but that did not change aything.
Am I doing this completely wrong?
Thanks for any hints
Michael
Signature · 1 line
Søren Holm