u-boot: vexpressca9x4: hang(?) with qemu

Hi,

I've build u-boot 2014.04 using

make vexpress_ca9x4_config

Now, I am trying to run it on qemu-system-arm 1.3.1 (as well as 1.7 gives same result) as the following:

qemu-system-arm -M vexpress-a9 -cpu cortex-a9 -m 1024 -kernel u-boot.bin -serial stdio

I want to see u-boot banner and console, but nothing happens, qemu are using 100% CPU. How can I dig out what the problem is?

09.06.2014 10:57, Matwey V. Kornilov ?????:

Quoted 6 lines

Hi,

I've build u-boot 2014.04 using

make vexpress_ca9x4_config

Quoted 8 lines

Now, I am trying to run it on qemu-system-arm 1.3.1 (as well as 1.7 gives same result) as the following:

qemu-system-arm -M vexpress-a9 -cpu cortex-a9 -m 1024 -kernel u-boot.bin -serial stdio

I want to see u-boot banner and console, but nothing happens, qemu are using 100% CPU. How can I dig out what the problem is?

So, I've took gdb and found the following:
http://paste.opensuse.org/29548916

If I understand correctly, something is wrong with linking. It is quite unlikely that get_device_and_partition is the first function to execute.

Any hints?

It actually jumps to 0x60010000 where the middle of get_device_and_partition located.