Skip to contentSkip to conversation

Add S3C2410 NAND support

PATCH New Harald Welte 2 participants 2 messages Feb 16, 2007 – Feb 20, 2007

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add S3C2410 NAND support

This patch adds NAND (including boot-from-NAND via steppingstone) support to the S3C2410 SoC code in u-boot

cpu/arm920t/s3c24x0/Makefile +1 -1
Index: u-boot/cpu/arm920t/s3c24x0/Makefile
===================================================================
@@ -26,7 +26,7 @@
 LIB	= $(obj)lib$(SOC).a
 
 COBJS	= i2c.o interrupts.o serial.o speed.o \
-	  usb_ohci.o
+	  usb_ohci.o nand_read.o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
cpu/arm920t/s3c24x0/nand.c new file +185 -0

185 lines not on this page · raw message

cpu/arm920t/s3c24x0/nand_read.c new file +97 -0

97 lines not on this page · raw message

cpu/arm920t/start.S +93 -0

117 lines not on this page · raw message

include/s3c2410.h +15 -6
Index: u-boot/include/s3c2410.h
===================================================================
@@ -38,12 +38,6 @@
 #define S3C2410_ECCSIZE		512
 #define S3C2410_ECCBYTES	3
 
-typedef enum {
-	S3C24X0_UART0,
-	S3C24X0_UART1,
-	S3C24X0_UART2
-} S3C24X0_UARTS_NR;
-
 /* S3C2410 device base addresses */
 #define S3C24X0_MEMCTL_BASE		0x48000000
 #define S3C24X0_USB_HOST_BASE		0x49000000
@@ -65,9 +59,23 @@
 #define S3C2410_SDI_BASE		0x5A000000
 
 
+#define oNFCONF			0x00
+#define oNFCMD			0x04
+#define oNFADDR			0x08
+#define oNFDATA			0x0C
+#define oNFSTAT			0x10
+#define oNFECC			0x14
+
+#ifndef __ASSEMBLER__
+
 /* include common stuff */
 #include <s3c24x0.h>
 
+typedef enum {
+	S3C24X0_UART0,
+	S3C24X0_UART1,
+	S3C24X0_UART2
+} S3C24X0_UARTS_NR;
 
 static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void)
 {
@@ -142,6 +150,7 @@
 	return (S3C2410_SDI * const)S3C2410_SDI_BASE;
 }
 
+#endif
 
 /* ISR */
 #define pISR_RESET		(*(unsigned *)(_ISR_STARTADDRESS+0x0))
Signature · 3 lines
- Harald Welte <[email protected]>          	        http://openmoko.org/
============================================================================
Software for the world's first truly open Free Software mobile phone
#1 lore raw

PATCH 1/1 Add S3C2410 NAND support

Hi,

Quoted 4 lines · Harald Welte <laforge <at> openmoko.org> writes:

This patch adds NAND (including boot-from-NAND via steppingstone) support to the S3C2410 SoC code in u-boot

Why didn't try to shared the code with nand_spl stuff for the 1st stage boot loader ?

s3c2410_cmdfunc seems unusued ?

Matthieu