hpet on nforce4/MCP51 in asus a6t
Hello,
I have a asus a6t with nforce4/MCP51 chipset. I pass to kernel 2.6.24 32 bit the options acpi_use_timer_override and hpet=force, in this way and the timer IRQ ends up routed as IO-APIC-edge instead of XT-PIC. With acpi_use_timer_override I just get:
TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
and it works through the IO-APIC.
Instead the hpet is disabled and I just get :
Time: acpi_pm clocksource has been installed.
Clocksource tsc unstable (delta = -85010975 ns)
Is possible to have hpet working also with if the BIOS doesn't support it ?
I wish to be personally CC'ed the answers/comments posted to the list in response to my posting.
Cecco
____________________________________________________
Tiscali.Fax: ricevi gratis sulla tua email e invii a 12 cent per pagina senza scatto alla risposta
http://vas.tiscali.it/fax//
[Adding tglx to CC as he knows more about HPET's than I]
Quoted 10 lines · On Sunday 03 February 2008 18:33:57 [email protected] wrote:
Hello,
I have a asus a6t with nforce4/MCP51 chipset. I pass to kernel 2.6.24 32 bit the optionsacpi_use_timer_overrideand hpet=force, in this way and the timer IRQ ends up routed as IO-APIC-edge instead of XT-PIC. Withacpi_use_timer_overrideI just get:TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
and it works through the IO-APIC.
Quoted 7 lines
Instead the hpet is disabled and I just get :
Time:
acpi_pmclocksource has been installed.
Clocksource tsc unstable (delta = -85010975 ns)Is possible to have hpet working also with if the BIOS doesn't support it ?
One point before we start - MCP51 is nForce 5, not nForce 4 (which is CK804).
If my understanding is correct, acpi_use_timer_override is only a workaround required for those nForce 5 boards that don't enable the HPET for you.
So IIUC, you should be able to use either 'hpet=force'
or 'acpi_use_timer_override', either of which should solve any timing issues you see, but you shouldn't need both (which should solve your problem of acpi_use_timer_override ignoring the HPET - it shouldn't be needed if 'hpet=force' enables the HPET).
-Carlos
Signature · 3 lines
E-Mail: [email protected] Web: strangeworlds.co.uk GPG Key ID: 0x23EE722D
Quoted 27 lines · Carlos Corbacho <carlos <at> strangeworlds.co.uk> writes:
[Adding tglx to CC as he knows more about HPET's than I]
Quoted 10 lines · On Sunday 03 February 2008 18:33:57 f.cecco77 <at> tiscali.it wrote:
Hello,
I have a asus a6t with nforce4/MCP51 chipset. I pass to kernel 2.6.24 32 bit the optionsacpi_use_timer_overrideand hpet=force, in this way and the timer IRQ ends up routed as IO-APIC-edge instead of XT-PIC. Withacpi_use_timer_overrideI just get:TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
and it works through the IO-APIC.
Quoted 7 lines
Instead the hpet is disabled and I just get :
Time:
acpi_pmclocksource has been installed.
Clocksource tsc unstable (delta = -85010975 ns)Is possible to have hpet working also with if the BIOS doesn't support it ?
One point before we start - MCP51 is nForce 5, not nForce 4 (which is CK804).
If my understanding is correct,
acpi_use_timer_overrideis only a workaround required for those nForce 5 boards that don't enable the HPET for you.
Quoted 7 lines
So IIUC, you should be able to use either 'hpet=force'
or 'acpi_use_timer_override', either of which should solve any timing issues you see, but you shouldn't need both (which should solve your problem ofacpi_use_timer_overrideignoring the HPET - it shouldn't be needed if 'hpet=force' enables the HPET).-Carlos
Thanks for your answer. In my case only acpi_use_timer_override helps with timing issues, enabling apic. Unfortunately, either the options hpet=force or acpi_use_timer_override don't enable HPET on asus a6t. The situation is always the same:
cecco:/home/cecco# grep Clock /proc/timer_list Clock Event Device: pit Clock Event Device: lapic Clock Event Device: lapic
I don't understand because with Turion X2 or amd64 is so difficult to have hpet and dynticks working. Is important to have a cool notebook, but Amd doesn't seem
to understand it. Amd has introduced C1e state for a good powersaving, saying
it is equivalent to C3 state but I haven't any prove about this.
Cecco