Skip to contentSkip to conversation

NFS-Mount with MIT-Kerberos5 doesn't use user tickets...

DISCUSSION Tom 5 participants 12 messages Apr 7, 2010 – Apr 10, 2010 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore

Tom

author
#0 lore raw

I'm trying to set up a kerberized NFSv4 client to mount a share using a local ticket (obtained by PAM when the user logged into the shell) instead of a machine specific ticket (i.e. I'd like to do user-based authorization). I already managed to get machine based authentification/authorization working for a test but i can't (and i don't want to) use local keytab files for storing the machine keys on the client machines in my production environment.

I'm running the rpc.gssd with the "-n -vvv -rrr" to make it consider user tickets too.
Now, when I try to mount the share to "/mnt/net" (the according fstab-line looks like "dnsdhcp:/ /mnt/net nfs4 sec=krb5p,user 0 0") the credentials cache of the user which is doing the mount is not being used. The second log message reads
"rpc.gssd[888]: getting credentials for client with uid 0 for server <srvname>" Googling around a bit i found out that some other people managed to make mount use the uid of the initiating user rather than 'root'(uid=0) (though they seem to have other problems...).

I'm not quite sure what is wrong with my setup and therefore i tried to dig into the code of gssd. The only thing i found is that the uid (0 in my case) is read from a file "clntXX/krb5" (within a pipefs) which is obviously written by the kernel.

A kernel update to 2.6.32-19 (i'm using ubuntu karmic on an amd64 machine) didn't make it any better.

Complete Log (client): http://pastebin.com/s7B2W7ie
The user ticket (i'm running the mount-command from an account of a user which is authenticated via kerberos (MIT Kerberos5)) resided in /tmp/krb5cc_10002_H6OYu0
Here's what klist said http://pastebin.com/Lrrs3AwM
And this is the client's krb5.conf: http://pastebin.com/JChsVNJQ

I'm really desperate now because i've been working on this problem for nearly two weeks now and i couldn't get by...

Can you suggest me how to specify which user should be utilized to carry out the mount? (Did I misconfigure something?)

By the way i've already downloaded the source-code of the nfs-utils (ver. 1.2.0) and modified
void handle_krb5_upcall(struct clnt_info *clp)
from
gssd/gssd_proc.c
to statically set uid to 10002 (just for testing what will happen) and it's pretty interesting what comes out:
http://pastebin.com/Qi1rWMLC

Thanks in advance!

#1 lore raw
Quoted 49 lines · Tom

I'm trying to set up a kerberized NFSv4 client to mount a share using a local ticket (obtained by PAM when the user logged into the shell) instead of a machine specific ticket (i.e. I'd like to do user-based authorization). I already managed to get machine based authentification/authorization working for a test but i can't (and i don't want to) use local keytab files for storing the machine keys on the client machines in my production environment.

I'm running the rpc.gssd with the "-n -vvv -rrr" to make it consider user tickets too.
Now, when I try to mount the share to "/mnt/net" (the according fstab-line looks like "dnsdhcp:/ /mnt/net  nfs4  sec=krb5p,user 0 0") the credentials cache of the user which is doing the mount is not being used. The second log message  reads
"rpc.gssd[888]: getting credentials for client with uid 0 for server <srvname>" Googling around a bit i found out that some other people managed to make mount use the uid of the initiating user rather than 'root'(uid=0) (though they seem to have other problems...).

I'm not quite sure what is wrong with my setup and therefore i tried to dig into the code of gssd. The only thing i found is that the uid (0 in my case) is read from a file "clntXX/krb5" (within a pipefs) which is obviously written by the kernel.

A kernel update to 2.6.32-19 (i'm using ubuntu karmic on an amd64 machine) didn't make it any better.

Complete Log (client): http://pastebin.com/s7B2W7ie
The user ticket (i'm running the mount-command from an account of a user which is authenticated via kerberos (MIT Kerberos5)) resided in /tmp/krb5cc_10002_H6OYu0
Here's what klist said http://pastebin.com/Lrrs3AwM
And this is the client's krb5.conf: http://pastebin.com/JChsVNJQ

I'm really desperate now because i've been working on this problem for nearly two weeks now and i couldn't get by...

Can you suggest me how to specify which user should be utilized to carry out the mount? (Did I misconfigure something?)

By the way i've already downloaded the source-code of the nfs-utils (ver. 1.2.0) and modified
void handle_krb5_upcall(struct clnt_info *clp)
from
gssd/gssd_proc.c
to statically set uid to 10002 (just for testing what will happen) and it's pretty interesting what comes out:
http://pastebin.com/Qi1rWMLC

Quoted 1 line

Thanks in advance!

By the looks of your /etc/fstab entry, the system (root) will try to mount /mnt/net automatically. You could try adding the "noauto" option and then manually issuing the mount command as the user. (Or use automount?)

K.C.

#2 lore raw
Quoted 5 lines

By the looks of your /etc/fstab entry, the system (root) will try to mount /mnt/net automatically. You could try adding the "noauto" option and then manually issuing the mount command as the user. (Or use automount?)
K.C.

I'm pretty sure that it doesn't try to automatically mount the share on startup since there is no log entry that would indicate such an attempt. I already tried to do the mount as a user (which is authenticated via kerberos such that there is a valid ticket for that user) the logs (that i have posted) are showing what comes out of it. If I try to do the mount without the fstab- entry (i.e. mount -t nfs4 -o sec=krb5p dnsdhcp:/ /mnt/net) it is being rejected on the grounds that only root can perform a mount. 'sudo' doesn't work currently (i've got some problems with my PAM config for sudo) so I haven't had any chance to try it out...

I've already set up automount but it actually does exactly the same as if I ran mount manually as described above.

I'm totally confused because I don't understand what people like
http://thread.gmane.org/gmane.linux.nfsv4/5893
might have done to perform a mount with normal user privileges. If it was really mandatory to be root (as stated by Andy Adamson in the other message) then I wouldn't really understand why they should have implemented the uid passing using that pipefs file....

#3 lore raw
Quoted 18 lines · On Wed, Apr 7, 2010 at 7:11 PM, <[email protected]> wrote:
Quoted 5 lines

By the looks of your /etc/fstab entry, the system (root) will try to mount /mnt/net automatically.  You could try adding the "noauto" option and then manually issuing the mount command as the user.  (Or use automount?)
K.C.

I'm pretty sure that it doesn't try to automatically mount the share on startup since there is no log entry that would indicate such an attempt. I already tried to do the mount as a user (which is authenticated via kerberos such that there is a valid ticket for that user) the logs (that i have posted) are showing what comes out of it. If I try to do the mount without the fstab- entry (i.e. mount -t nfs4 -o sec=krb5p dnsdhcp:/ /mnt/net) it is being rejected on the grounds that only root can perform a mount. 'sudo' doesn't work currently (i've got some problems with my PAM config for sudo) so I haven't had any chance to try it out...

I've already set up automount but it actually does exactly the same as if I ran mount manually as described above.

Quoted 6 lines

I'm totally confused because I don't understand what people like
http://thread.gmane.org/gmane.linux.nfsv4/5893
might have done to perform a mount with normal user privileges. If it was really mandatory to be root (as stated by Andy Adamson in the other message) then I wouldn't really understand why they should have implemented the uid passing using that pipefs file....

Hello Tom,

To allow non-root users to do the mount, add the "user" option to the entry in /etc/fstab. Then the user with uid 10002 should be able to kinit and then mount. (Note that in this case, there is no need for the "-n" option to rpc.gssd.)

K.C.

#4 lore raw
Quoted 27 lines · On Thursday 08 April 2010 16:18:11 you wrote:
Quoted 19 lines · On Wed, Apr 7, 2010 at 7:11 PM, <[email protected]> wrote:
Quoted 5 lines

By the looks of your /etc/fstab entry, the system (root) will try to mount /mnt/net automatically. You could try adding the "noauto" option and then manually issuing the mount command as the user. (Or use automount?)
K.C.

I'm pretty sure that it doesn't try to automatically mount the share on startup since there is no log entry that would indicate such an attempt. I already tried to do the mount as a user (which is authenticated via kerberos such that there is a valid ticket for that user) the logs (that i have posted) are showing what comes out of it. If I try to do the mount without the fstab- entry (i.e. mount -t nfs4 -o sec=krb5p dnsdhcp:/ /mnt/net) it is being rejected on the grounds that only root can perform a mount. 'sudo' doesn't work currently (i've got some problems with my PAM config for sudo) so I haven't had any chance to try it out...

I've already set up automount but it actually does exactly the same as if I ran mount manually as described above.

Quoted 6 lines

I'm totally confused because I don't understand what people like
http://thread.gmane.org/gmane.linux.nfsv4/5893
might have done to perform a mount with normal user privileges. If it was really mandatory to be root (as stated by Andy Adamson in the other message) then I wouldn't really understand why they should have implemented the uid passing using that pipefs file....

Quoted 9 lines

Hello Tom,

To allow non-root users to do the mount, add the "user" option to the entry in /etc/fstab. Then the user with uid 10002 should be able to kinit and then mount. (Note that in this case, there is no need for the "-n" option to rpc.gssd.)

K.C.

I've already added have the "user"-option in my fstab (I also reported that in my very first message) such that the entry looks like:
dnsdhcp:/ /mnt/net nfs4 sec=krb5p,user 0 0

To express it more clearly:
The user with uid=10002 (username = tomkrb) can do a kinit but i guess it doesn't need to if it is already logged into a bash-console using pam_krb5- authentication-module. A ticket already exists for that session in the /tmp directory and if i modify the "void handle_krb5_upcall(struct clnt_info *clp)"-function in gssd_proc.c to not use the uid which is passed by the kernel but rather use 10002 (statically) that ticket is also accepted.

Meanwhile i succeeded in getting sudo working. Performing
sudo mount -t nfs4 -o sec=krb5p dnsdhcp:/ /mnt/net
from a (physical) console where tomkrb (uid=10002) is logged in also results in uid=0 being passed instead of uid=10002.

Is it possible to understand what i'd like to do at all?

Signature · 6 lines
Lehrstuhl für Softwaretechnik und Programmiersprachen
Fakultät WIAI, Universität Bamberg, 96045 Bamberg

Email: [email protected]
Web: http://www.swt-bamberg.de/
Tel.: 0951 863-3852 / Fax: 0951 863-3855
#5 lore raw
Quoted 35 lines · Thomas Wunder
Quoted 34 lines · On Thursday 08 April 2010 16:18:11 you wrote:
Quoted 19 lines · On Wed, Apr 7, 2010 at 7:11 PM,  <[email protected]> wrote:
Quoted 5 lines

By the looks of your /etc/fstab entry, the system (root) will try to mount /mnt/net automatically.  You could try adding the "noauto" option and then manually issuing the mount command as the user.  (Or use automount?)
K.C.

I'm pretty sure that it doesn't try to automatically mount the share on startup since there is no log entry that would indicate such an attempt. I already tried to do the mount as a user (which is authenticated via kerberos such that there is a valid ticket for that user) the logs (that i have posted) are showing what comes out of it. If I try to do the mount without the fstab- entry (i.e. mount -t nfs4 -o sec=krb5p dnsdhcp:/ /mnt/net) it is being rejected on the grounds that only root can perform a mount. 'sudo' doesn't work currently (i've got some problems with my PAM config for sudo) so I haven't had any chance to try it out...

I've already set up automount but it actually does exactly the same as if I ran mount manually as described above.

Quoted 6 lines

I'm totally confused because I don't understand what people like
http://thread.gmane.org/gmane.linux.nfsv4/5893
might have done to perform a mount with normal user privileges. If it was really mandatory to be root (as stated by Andy Adamson in the other message) then I wouldn't really understand why they should have implemented the uid passing using that pipefs file....

Hello Tom,

To allow non-root users to do the mount, add the "user" option to the entry in /etc/fstab.  Then the user with uid 10002 should be able to kinit and then mount.  (Note that in this case, there is no need for the "-n" option to rpc.gssd.)

Quoted 5 lines
Quoted 2 lines

K.C.

I've already added have the "user"-option in my fstab (I also reported that in my very first message) such that the entry looks like:
dnsdhcp:/  /mnt/net nfs4   sec=krb5p,user          0       0

Sorry, I missed that, or forgot. And you still get "mount : only root can mount ..." if you do "mount /mnt/net" as tomkrb ?? If so, that seems like a bug.

Quoted 8 lines

To express it more clearly:
The user with uid=10002 (username = tomkrb) can do a kinit but i guess it doesn't need to if it is already logged into a bash-console using pam_krb5- authentication-module. A ticket already exists for that session in the /tmp directory and if i modify the "void handle_krb5_upcall(struct clnt_info *clp)"-function in gssd_proc.c to not use the uid which is passed by the kernel but rather use 10002 (statically) that ticket is also accepted.

Quoted 4 lines

Meanwhile i succeeded in getting sudo working. Performing
sudo mount -t nfs4 -o sec=krb5p dnsdhcp:/ /mnt/net
from a (physical) console where tomkrb (uid=10002) is logged in also results in uid=0 being passed instead of uid=10002.

Yes, because under sudo, you are running as root.

Quoted 1 line

Is it possible to understand what i'd like to do at all?

Apparently I also skipped the end of your original message where you overrode the UID and the gss context exchange seemingly worked, but then failed to write the context to the kernel. This has usually been caused by the proper kernel module (rpcsec_gss_krb5) not being loaded.
You said you had this working for the case where root did the mount
using a keytab though, correct? It can also be caused by a mismatch of sec flavors. (i.e., is the server exporting with krb5p?)

K.C.

#6 lore raw
Quoted 3 lines · On Thursday 08 April 2010 20:58:49 you wrote:

Sorry, I missed that, or forgot. And you still get "mount : only root can mount ..." if you do "mount /mnt/net" as tomkrb ?? If so, that seems like a bug.

No, with that entry each user is able to invoke mount. The problem is that mount is carried out with uid=0 then.

Quoted 1 line

Yes, because under sudo, you are running as root.

obviously...

I'm wondering if there's a chance to run mount with a non-root uid at all. On the other hand is that really needed? I mean I just want it to pass the calling user's uid to the rpc.gssd...

By the way the rpcsec_gss_krb5 is loaded.

Quoted 3 lines

You said you had this working for the case where root did the mount
using a keytab though, correct? It can also be caused by a mismatch of sec flavors. (i.e., is the server exporting with krb5p?)

Yes, it worked fine when i used a keytab-file with the key for the client- machine-principal in it. When i issued mount everything worked fine. The problem with this kind of setup is just that this would simply be some kind of host-based authentication and I can't trust the people which will use the clients as much to use a keytab file. They could simply boot from a LiveCD, memstick etc. and steal that keytab file...
I've double checked that krb5p is specified in the server's /etc/exports as well as in the client's /etc/fstab (i've also tried it with "krb5" on both sides but that didn't make any difference) .

Does it matter whether those two flags match before the security context is completely established at all?

#7 lore raw
Quoted 30 lines · Thomas Wunder
Quoted 3 lines · On Thursday 08 April 2010 20:58:49 you wrote:

Sorry, I missed that, or forgot.  And you still get "mount : only root can mount ..." if you do "mount /mnt/net" as tomkrb ??  If so, that seems like a bug.

No, with that entry each user is able to invoke mount. The problem is that mount is carried out with uid=0 then.

Quoted 1 line

Yes, because under sudo, you are running as root.

obviously...

I'm wondering if there's a chance to run mount with a non-root uid at all. On the other hand is that really needed? I mean I just want it to pass the calling user's uid to the rpc.gssd...

By the way the rpcsec_gss_krb5 is loaded.

Quoted 3 lines

 You said you had this working for the case where root did the mount using a keytab though, correct?  It can also be caused by a mismatch of sec flavors.  (i.e., is the server exporting with krb5p?)

Yes, it worked fine when i used a keytab-file with the key for the client- machine-principal in it. When i issued mount everything worked fine. The problem with this kind of setup is just that this would simply be some kind of host-based authentication and I can't trust the people which will use the clients as much to use a keytab file. They could simply boot from a LiveCD, memstick etc. and steal that keytab file...
I've double checked that krb5p is specified in the server's /etc/exports as well as in the client's /etc/fstab (i've also tried it with "krb5" on both sides but that didn't make any difference) .

Quoted 2 lines

Does it matter whether those two flags match before the security context is completely established at all?

I tried a user mount yesterday and it worked fine, but I had a keytab on the machine. Looking closer today, I see two upcalls coming up for the user-mount case. The first has uid 0, as you say. The second was with my uid. Removing my keytab causes the mount to fail as you are seeing. Sorry to take so long to figure that out.

I don't think this has always been the case. Something might have changed with the new kernel mount code?

Copying Chuck to see if he knows more...

K.C.

A message that is not in the archive (sent off-list or not yet received): y2o4d569c331004090750zeb56bf58udb7bbfb3277832c-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org

#9 lore raw

Is this the infamous 'test-export' call that should be removed?

-->Andy

On Fri, Apr 9, 2010 at 10:50 AM, Kevin Coffman <[email protected]> wro= te:

Quoted 4 lines
Quoted 2 lines · Thomas Wunder
Quoted 1 line · On Thursday 08 April 2010 20:58:49 you wrote:

Sorry, I missed that, or forgot. =A0And you still get "mount : only=

root

Quoted 1 line
Quoted 1 line
Quoted 1 line

can mount ..." if you do "mount /mnt/net" as tomkrb ?? =A0If so, th=

at

Quoted 3 lines
Quoted 3 lines
Quoted 1 line

seems like a bug.

No, with that entry each user is able to invoke mount. The problem i=

s that

Quoted 6 lines
Quoted 6 lines

mount is carried out with uid=3D0 then.

Quoted 1 line

Yes, because under sudo, you are running as root.

obviously...

I'm wondering if there's a chance to run mount with a non-root uid a=

t all. On

Quoted 1 line
Quoted 1 line

the other hand is that really needed? I mean I just want it to pass =

the

Quoted 5 lines
Quoted 5 lines

calling user's uid to the rpc.gssd...

By the way the rpcsec_gss_krb5 is loaded.

Quoted 1 line

=A0You said you had this working for the case where root did the mo=

unt

Quoted 1 line
Quoted 1 line
Quoted 1 line

using a keytab though, correct? =A0It can also be caused by a misma=

tch

Quoted 2 lines
Quoted 2 lines
Quoted 1 line

of sec flavors. =A0(i.e., is the server exporting with krb5p?)

Yes, it worked fine when i used a keytab-file with the key for the c=

lient-

Quoted 1 line
Quoted 1 line

machine-principal in it. When i issued mount everything worked fine.=

The

Quoted 1 line
Quoted 1 line

problem with this kind of setup is just that this would simply be so=

me kind of

Quoted 1 line
Quoted 1 line

host-based authentication and I can't trust the people which will us=

e the

Quoted 1 line
Quoted 1 line

clients as much to use a keytab file. They could simply boot from a =

LiveCD,

Quoted 2 lines
Quoted 2 lines

memstick etc. and steal that keytab file...
I've double checked that krb5p is specified in the server's /etc/exp=

orts as

Quoted 1 line
Quoted 1 line

well as in the client's /etc/fstab (i've also tried it with "krb5" o=

n both

Quoted 3 lines
Quoted 3 lines

sides but that didn't make any difference) .

Does it matter whether those two flags match before the security con=

text is

Quoted 4 lines
Quoted 1 line

completely established at all?

I tried a user mount yesterday and it worked fine, but I had a keytab on the machine. =A0Looking closer today, I see two upcalls coming up =

for

Quoted 1 line

the user-mount case. =A0The first has uid 0, as you say. =A0The secon=

d was

Quoted 1 line

with my uid. =A0Removing my keytab causes the mount to fail as you ar=

e

Quoted 10 lines

seeing. =A0Sorry to take so long to figure that out.

I don't think this has always been the case. =A0Something might have changed with the new kernel mount code?

Copying Chuck to see if he knows more...

K.C.
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" =

in

Quoted 3 lines

the body of a message to [email protected]
More majordomo info at =A0http://vger.kernel.org/majordomo-info.html

#10 lore raw
In reply to a message not in the archive
Quoted 41 lines · Kevin Coffman
Quoted 30 lines · Thomas Wunder
Quoted 3 lines · On Thursday 08 April 2010 20:58:49 you wrote:

Sorry, I missed that, or forgot. And you still get "mount : only root can mount ..." if you do "mount /mnt/net" as tomkrb ?? If so, that seems like a bug.

No, with that entry each user is able to invoke mount. The problem is that mount is carried out with uid=0 then.

Quoted 1 line

Yes, because under sudo, you are running as root.

obviously...

I'm wondering if there's a chance to run mount with a non-root uid at all. On the other hand is that really needed? I mean I just want it to pass the calling user's uid to the rpc.gssd...

By the way the rpcsec_gss_krb5 is loaded.

Quoted 3 lines

You said you had this working for the case where root did the mount
using a keytab though, correct? It can also be caused by a mismatch of sec flavors. (i.e., is the server exporting with krb5p?)

Yes, it worked fine when i used a keytab-file with the key for the client- machine-principal in it. When i issued mount everything worked fine. The problem with this kind of setup is just that this would simply be some kind of host-based authentication and I can't trust the people which will use the clients as much to use a keytab file. They could simply boot from a LiveCD, memstick etc. and steal that keytab file...
I've double checked that krb5p is specified in the server's /etc/exports as well as in the client's /etc/fstab (i've also tried it with "krb5" on both sides but that didn't make any difference) .

Quoted 2 lines

Does it matter whether those two flags match before the security context is completely established at all?

I tried a user mount yesterday and it worked fine, but I had a keytab on the machine. Looking closer today, I see two upcalls coming up for the user-mount case. The first has uid 0, as you say. The second was with my uid. Removing my keytab causes the mount to fail as you are seeing. Sorry to take so long to figure that out.

Quoted 4 lines

I don't think this has always been the case. Something might have changed with the new kernel mount code?

Copying Chuck to see if he knows more...

I don't know anything about these upcalls, sorry.

Signature · 1 line
chuck[dot]lever[at]oracle[dot]com
#11 lore raw
Quoted 1 line

I don't know anything about these upcalls, sorry.

But maybe you know which piece of code puts the uid into /var/lib/nfs/rpc_pipefs/clntXX/krb5

It's hard for me to find an entry point to dig into the nfs kernel code on my own as i haven't got any experience with linux "filesystem drivers" yet...

We just need to find out why it always puts "0" there instead of the real uid of the user which invoked the mound command...

#12 lore raw
In reply to Tom
Quoted 18 lines · Tom

I'm trying to set up a kerberized NFSv4 client to mount a share using a local ticket (obtained by PAM when the user logged into the shell) instead of a machine specific ticket (i.e. I'd like to do user-based authorization). I already managed to get machine based authentification/authorization working for a test but i can't (and i don't want to) use local keytab files for storing the machine keys on the client machines in my production environment.

I'm running the rpc.gssd with the "-n -vvv -rrr" to make it consider user tickets too.
Now, when I try to mount the share to "/mnt/net" (the according fstab-line looks like "dnsdhcp:/ /mnt/net nfs4 sec=krb5p,user 0 0") the credentials cache of the user which is doing the mount is not being used. The second log message reads
"rpc.gssd[888]: getting credentials for client with uid 0 for server <srvname>" Googling around a bit i found out that some other people managed to make mount use the uid of the initiating user rather than 'root'(uid=0) (though they seem to have other problems...).

Quoted 4 lines

I'm not quite sure what is wrong with my setup and therefore i tried to dig into the code of gssd. The only thing i found is that the uid (0 in my case) is read from a file "clntXX/krb5" (within a pipefs) which is obviously written by the kernel.

This means that you are performing the mount from a process whose uid = 0, e.g, your local linux user is root.

Don't you need to be local linux user root to perform any mount?

So, you need to associate the Kerberos principal of the PAM ticket with the UID=0.

-->Andy

Quoted 33 lines

A kernel update to 2.6.32-19 (i'm using ubuntu karmic on an amd64 machine) didn't make it any better.

Complete Log (client): http://pastebin.com/s7B2W7ie
The user ticket (i'm running the mount-command from an account of a user which is authenticated via kerberos (MIT Kerberos5)) resided in /tmp/krb5cc_10002_H6OYu0
Here's what klist said http://pastebin.com/Lrrs3AwM
And this is the client's krb5.conf: http://pastebin.com/JChsVNJQ

I'm really desperate now because i've been working on this problem for nearly two weeks now and i couldn't get by...

Can you suggest me how to specify which user should be utilized to carry out the mount? (Did I misconfigure something?)

By the way i've already downloaded the source-code of the nfs-utils (ver. 1.2.0) and modified
void handle_krb5_upcall(struct clnt_info *clp)
from
gssd/gssd_proc.c
to statically set uid to 10002 (just for testing what will happen) and it's pretty interesting what comes out:
http://pastebin.com/Qi1rWMLC

Thanks in advance!

--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html