Skip to contentSkip to conversation

xhci module fails when booting in UEFI mode

DISCUSSION Frederik Himpe 3 participants 3 messages Jan 10, 2013 – Mar 10, 2013

lore
Share & tools
lore
#0 lore raw

I've got a HP EliteBook 8470p on which I installed Debian Wheezy in UEFI mode. With both the 3.2 kernel from Wheezy, as the 3.7.1 kernel from experimental, xhci fails to initialize and my USB mouse connected to one of these ports is not recognized at all. The USB3 ports work fine in Windows.

[    1.316248] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.316251] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.316253] 
[    1.316277] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.316281] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.316287] xhci_hcd 0000:00:14.0: new USB bus registered, assigned 
bus number 1
[    1.316393] xhci_hcd 0000:00:14.0: cache line size of 64 is not 
supported
[    1.316395] xhci_hcd 0000:00:14.0: request interrupt 255 failed
[    1.316447] xhci_hcd 0000:00:14.0: USB bus 1 deregistered
[    1.316466] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.316467] xhci_hcd 0000:00:14.0: init 0000:00:14.0 fail, -22
[    1.316505] xhci_hcd: probe of 0000:00:14.0 failed with error -22

Full dmesg, lspci, lsusb and lsmod can be found here:
http://artipc10.vub.ac.be/~frederik/uefi-xhci/

I found this report about the same problem on a HP Probook system:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1072918

Signature · 1 line
Frederik Himpe
#1 lore raw
Quoted 21 lines · Frederik Himpe

I've got a HP EliteBook 8470p on which I installed Debian Wheezy in UEFI mode. With both the 3.2 kernel from Wheezy, as the 3.7.1 kernel from experimental, xhci fails to initialize and my USB mouse connected to one of these ports is not recognized at all. The USB3 ports work fine in Windows.

[    1.316248] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.316251] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.316253] 
[    1.316277] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.316281] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.316287] xhci_hcd 0000:00:14.0: new USB bus registered, assigned 
bus number 1
[    1.316393] xhci_hcd 0000:00:14.0: cache line size of 64 is not 
supported
[    1.316395] xhci_hcd 0000:00:14.0: request interrupt 255 failed
[    1.316447] xhci_hcd 0000:00:14.0: USB bus 1 deregistered
[    1.316466] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.316467] xhci_hcd 0000:00:14.0: init 0000:00:14.0 fail, -22
[    1.316505] xhci_hcd: probe of 0000:00:14.0 failed with error -22
Quoted 5 lines

Full dmesg, lspci, lsusb and lsmod can be found here:
http://artipc10.vub.ac.be/~frederik/uefi-xhci/

I found this report about the same problem on a HP Probook system:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1072918

I have the same problem (HP Elitebook 8570p in my case).

This thread seems related:
https://lkml.org/lkml/2012/2/13/453

No idea what happened to the patches in that thread though...

Signature · 1 line
David Härdeman
#2 lore raw
Quoted 29 lines · David Härdeman <david <at> hardeman.nu> writes:
Quoted 21 lines · Frederik Himpe

I've got a HP EliteBook 8470p on which I installed Debian Wheezy in UEFI mode. With both the 3.2 kernel from Wheezy, as the 3.7.1 kernel from experimental, xhci fails to initialize and my USB mouse connected to one of these ports is not recognized at all. The USB3 ports work fine in Windows.

[    1.316248] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.316251] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.316253] 
[    1.316277] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.316281] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.316287] xhci_hcd 0000:00:14.0: new USB bus registered, assigned 
bus number 1
[    1.316393] xhci_hcd 0000:00:14.0: cache line size of 64 is not 
supported
[    1.316395] xhci_hcd 0000:00:14.0: request interrupt 255 failed
[    1.316447] xhci_hcd 0000:00:14.0: USB bus 1 deregistered
[    1.316466] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.316467] xhci_hcd 0000:00:14.0: init 0000:00:14.0 fail, -22
[    1.316505] xhci_hcd: probe of 0000:00:14.0 failed with error -22
Quoted 5 lines

Full dmesg, lspci, lsusb and lsmod can be found here:
http://artipc10.vub.ac.be/~frederik/uefi-xhci/

I found this report about the same problem on a HP Probook system:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1072918

Quoted 7 lines

I have the same problem (HP Elitebook 8570p in my case).

This thread seems related:
https://lkml.org/lkml/2012/2/13/453

No idea what happened to the patches in that thread though...

workaround on hp 8570

using kernel parameter

acpi=noirq

USB 3 will work

........

[ 0.000000] Linux version 3.5.0-25-generic (buildd@komainu) (gcc version 4.7.2
(Ubuntu/Linaro 4.7.2-2ubuntu1) ) #39-Ubuntu SMP Mon Feb 25 18:26:58 UTC 2013
(Ubuntu 3.5.0-25.39-generic 3.5.7.4)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-25-generic.efi.signed
root=UUID=f8ccd8b4-9642-48c1-b57d-258ebbb6ee14 ro quiet splash acpi=noirq
vt.handoff=7
........
$ dmesg | grep xhci
[ 1.141906] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; please try
using pci=biosirq
[ 1.141922] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.141924] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.141927] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.142008] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.142048] xhci_hcd 0000:00:14.0: irq 23 for MSI/MSI-X
[ 1.142087] usb usb3: Manufacturer: Linux 3.5.0-25-generic xhci_hcd
[ 1.142137] xHCI xhci_add_endpoint called for root hub
[ 1.142139] xHCI xhci_check_bandwidth called for root hub
[ 1.142196] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.142198] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.142218] usb usb4: Manufacturer: Linux 3.5.0-25-generic xhci_hcd
[ 1.142260] xHCI xhci_add_endpoint called for root hub
[ 1.142261] xHCI xhci_check_bandwidth called for root hub
[ 15.089213] genirq: Flags mismatch irq 23. 00002001 (lis3lv02d) vs. 00000000
(xhci_hcd)
........

if you like to recompile your own kernel, someone has reported this patch work i can wait until this one will be included in the main kernel :D

https://lkml.org/lkml/2013/2/18/115