How can I remove packages from rootfs file ?
Hi,
I maked a fsl-image-minaml rootfs file and customized it with adding particular packages. For example, I added IMAGE_INSTALL_append_pn-fsl-image-minimal = " task-core-ssh-openssh task-core-nfs-server" in local.conf file. The problem is that, the rootfs file has 6-7 MB capacity but this capacity of file is very high and not acceptable to me. So how can I remove some packages from rootfs file that I do not want ? For example, remove packages like ar, arping, basename, telnet, beep, .....
Thanks,
Js
Any help ???
Quoted 7 lines · On Saturday 25 May 2013 13:58:46 Jack wrote:
I maked a fsl-image-minaml rootfs file and customized it with adding particular packages. For example, I added IMAGE_INSTALL_append_pn-fsl-image-minimal = " task-core-ssh-openssh task-core-nfs-server" in local.conf file. The problem is that, the rootfs file has 6-7 MB capacity but this capacity of file is very high and not acceptable to me. So how can I remove some packages from rootfs file that I do not want ?
There are several different aspects to answering this question.
The list of packages to be installed is composed of several things - the list of packages specified in IMAGE_INSTALL, packages brought in by IMAGE_FEATURES, and packages brought in to satisfy dependencies of either of the first two.
One way to analyse the contents of your image is to enable buildhistory [1] which gives you the full list of installed packages, installed packages by size, as well as graphs (.dot) that will show you the dependency relationships between the packages. These dot graphs can be viewed by converting them to images using the "dot" command (from graphviz) or using a viewer such as xdot [2].
Once you've analysed things at this level, you may find there are dependency relationships that can't easily be broken, or some packages that are overly large. At this point you will need to start looking at changing the build configuraton of the packages in question - disabling optional functionalty, removing optional dependencies etc. (usually this would be done by changing DISTRO_FEATURES, modifying the kernel configuration, changing PACKAGECONFIG options for individual recipes, or if those aren't available modifying EXTRA_OECONF). How far you want to go with this depends on how much you want to optimise the size of your image.
If you do find you need to go down the latter path, I'd recommend checking out Darren Hart's presentation "Tuning Embedded Linux - When Less is More" [3].
Quoted 1 line
For example, remove packages like ar, arping, basename, telnet, beep, .....
Note that whilst some of these may be from packages you can remove, many of them may be functionality provided by busybox, i.e. where the command is just a symlink to the busybox binary. You can modify the busybox build-time configuration to disable these, but bear in mind that disabling them usually only saves you a few kB. For some applications that may be a useful saving, of course.
HTH.
Cheers,
Paul
[1] http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#maintaining-build-output-quality
[2] https://github.com/jrfonseca/xdot.py
[3] Slides: http://elinux.org/images/2/2b/Elce11_hart.pdf
Video: http://www.youtube.com/watch?v=WHLvI8j31vk
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
Quoted 46 lines · Paul Eggleton
Quoted 6 lines · On Saturday 25 May 2013 13:58:46 Jack wrote:
I maked a fsl-image-minaml rootfs file and customized it with adding particular packages. For example, I added IMAGE_INSTALL_append_pn-fsl-image-minimal = " task-core-ssh-openssh task-core-nfs-server" in local.conf file. The problem is that, the rootfs file has 6-7 MB capacity but this capacity of file is very high and not acceptable to me. So how can I remove some packages from rootfs file
that I
Quoted 1 line
do not want ?
There are several different aspects to answering this question.
The list of packages to be installed is composed of several things - the list
of packages specified inIMAGE_INSTALL, packages brought in byIMAGE_FEATURES,
and packages brought in to satisfy dependencies of either of the first two.One way to analyse the contents of your image is to enable buildhistory [1] which gives you the full list of installed packages, installed packages by size, as well as graphs (.dot) that will show you the dependency relationships
between the packages. These dot graphs can be viewed by converting them to images using the "dot" command (from graphviz) or using a viewer such as xdot
[2].Once you've analysed things at this level, you may find there are dependency
relationships that can't easily be broken, or some packages that are overly large. At this point you will need to start looking at changing the build configuraton of the packages in question - disabling optional functionalty, removing optional dependencies etc. (usually this would be done by changingDISTRO_FEATURES, modifying the kernel configuration, changing PACKAGECONFIG options for individual recipes, or if those aren't available modifyingEXTRA_OECONF). How far you want to go with this depends on how much you want
to optimise the size of your image.If you do find you need to go down the latter path, I'd recommend checking out
Darren Hart's presentation "Tuning Embedded Linux - When Less is More" [3].Quoted 1 line
For example, remove packages like ar, arping, basename, telnet, beep,
.....
Quoted 8 lines
Note that whilst some of these may be from packages you can remove, many of them may be functionality provided by busybox, i.e. where the command is just
a symlink to the busybox binary. You can modify the busybox build-time configuration to disable these, but bear in mind that disabling them usually only saves you a few kB. For some applications that may be a useful saving, of course.
on top of that, i wanted to remind that there is a dedicated chapter in the Yocto manual about building 'tiny' systems [1]. Also you don't mention which 'DISTRO' you are using, so make sure that you are aware that Yocto comes with Poky, and Poky-tiny as well, which according to conf/distro/poky-tiny.conf says:
# Poky-tiny is intended to define a tiny Linux system comprised of a
# Linux kernel tailored to support each specific MACHINE and busybox.
# Poky-tiny sets some basic policy to ensure a usable system while still
# keeping the rootfs and kernel image as small as possible.
see [2]
Finally, note that some packages comes with builtin "RRECOMMENDS" which are installed by default in the RootFS. If you are using IPK backend you can use the variables BAD_RECOMMENDS to make sure that though packages are marked as RRECOMMENDS, they aren't installed in the rootFS. I believe this only works with IPK for now.
[1]
http://www.yoctoproject.org/docs/current/dev-manual/dev-manual.html#building-a-tiny-system
[2]
http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-yocto/conf/distro/poky-tiny.conf
Quoted 23 lines
HTH.
Cheers,
Paul[1]
http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#maintaining-build-output-quality[2] https://github.com/jrfonseca/xdot.py
[3] Slides: http://elinux.org/images/2/2b/Elce11_hart.pdf
Video: http://www.youtube.com/watch?v=WHLvI8j31vk--
Paul Eggleton
Intel Open Source Technology Centre
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Thanks Nicolas,
Quoted 4 lines · Nicolas Dechesne
On Sun, May 26, 2013 at 1:41 PM, Paul Eggleton
Quoted 41 lines · <[email protected]> wrote:
Quoted 7 lines · On Saturday 25 May 2013 13:58:46 Jack wrote:
I maked a fsl-image-minaml rootfs file and customized it with adding particular packages. For example, I added IMAGE_INSTALL_append_pn-fsl-image-minimal = " task-core-ssh-openssh task-core-nfs-server" in local.conf file. The problem is that, the rootfs file has 6-7 MB capacity but this capacity of file is very high and not acceptable to me. So how can I remove some packages from rootfs file that I do not want ?
There are several different aspects to answering this question. The list of packages to be installed is composed of several things - the list of packages specified in
IMAGE_INSTALL, packages brought in byIMAGE_FEATURES, and packages brought in to satisfy dependencies of either of the first two. One way to analyse the contents of your image is to enable buildhistory [1] which gives you the full list of installed packages, installed packages by size, as well as graphs (.dot) that will show you the dependency relationships between the packages. These dot graphs can be viewed by converting them to images using the "dot" command (from graphviz) or using a viewer such as xdot [2].
Once you've analysed things at this level, you may find there are dependency relationships that can't easily be broken, or some packages that are overly large. At this point you will need to start looking at changing the build configuraton of the packages in question - disabling optional functionalty, removing optional dependencies etc. (usually this would be done by changingDISTRO_FEATURES, modifying the kernel configuration, changing PACKAGECONFIG options for individual recipes, or if those aren't available modifyingEXTRA_OECONF). How far you want to go with this depends on how much you want to optimise the size of your image.
If you do find you need to go down the latter path, I'd recommend checking out Darren Hart's presentation "Tuning Embedded Linux - When Less is More" [3].Quoted 1 line
For example, remove packages like ar, arping, basename, telnet, beep, .....
Note that whilst some of these may be from packages you can remove, many of them may be functionality provided by busybox, i.e. where the command is just a symlink to the busybox binary. You can modify the busybox build-time configuration to disable these, but bear in mind that disabling them usually only saves you a few kB. For some applications that may be a useful saving, of course.
Quoted 1 line
on top of that, i wanted to remind that there is a dedicated chapter in
the Yocto manual about building 'tiny' systems [1]. Also you don't mention which 'DISTRO' you are using, so make sure that you are aware that Yocto comes with Poky, and Poky-tiny as well, which according to conf/distro/poky-tiny.conf says:
Quoted 1 line
My MACHINE is p1022ds and DISTRO is fsl. When I changed fsl to poky I got error.
What should I do ?
Quoted 1 line
# Poky-tiny is intended to define a tiny Linux system comprised of a
Quoted 3 lines
# Linux kernel tailored to support each specific MACHINE and busybox.
Quoted 1 line
# Poky-tiny sets some basic policy to ensure a usable system while still
Quoted 2 lines
# keeping the rootfs and kernel image as small as possible.
Quoted 6 lines
see [2]
Finally, note that some packages comes with builtin "RRECOMMENDS" which
are installed by default in the RootFS. If you are using IPK backend you can use the variables BAD_RECOMMENDS to make sure that though packages are marked as RRECOMMENDS, they aren't installed in the rootFS. I believe this only works with IPK for now.
Quoted 4 lines
[1] http://www.yoctoproject.org/docs/current/dev-manual/dev-manual.html#building-a-tiny-system
Quoted 3 lines
[2] http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-yocto/conf/distro/poky-tiny.conf
Quoted 10 lines · Jack
Quoted 1 line
on top of that, i wanted to remind that there is a dedicated chapter in
the Yocto manual about building 'tiny' systems [1]. Also you don't mention which 'DISTRO' you are using, so make sure that you are aware that Yocto comes with Poky, and Poky-tiny as well, which according to
conf/distro/poky-tiny.confsays:Quoted 1 line
My MACHINE is p1022ds and DISTRO is fsl. When I changed fsl to poky I got error.
What should I do ?
ok, i was assuming you might be using DISTRO=poky... if you use another DISTRO, then i suggest that you study the differences between poky and poky-tiny to understand how the 'reference' DISTRO is building its 'tiny' variant. there are certainly things you can reused from poky-tiny to optimize your own build.
Thanks a lot Paul.
Quoted 16 lines · Paul Eggleton
Quoted 7 lines · On Saturday 25 May 2013 13:58:46 Jack wrote:
I maked a fsl-image-minaml rootfs file and customized it with adding particular packages. For example, I added IMAGE_INSTALL_append_pn-fsl-image-minimal = " task-core-ssh-openssh task-core-nfs-server" in local.conf file. The problem is that, the rootfs file has 6-7 MB capacity but this capacity of file is very high and not acceptable to me. So how can I remove some packages from rootfs file that I do not want ?
There are several different aspects to answering this question.
The list of packages to be installed is composed of several things - the list of packages specified in
IMAGE_INSTALL, packages brought in byIMAGE_FEATURES, and packages brought in to satisfy dependencies of either of the first two.
Quoted 6 lines
One way to analyse the contents of your image is to enable buildhistory [1] which gives you the full list of installed packages, installed packages by size, as well as graphs (.dot) that will show you the dependency relationships between the packages. These dot graphs can be viewed by converting them to images using the "dot" command (from graphviz) or using a viewer such as xdot [2].
I enabled buildhistory by adding INHERIT += "buildhistory" and BUILDHISTORY_COMMIT = "1" to local.conf file. But I got this error :
| error: Failed dependencies:
| libcrypt.so.1(GLIBC_2.0) is needed by inetutils-1.8-r0.ppce500v2 .
.
.
.
How can I solve this error ?
Quoted 11 lines
Once you've analysed things at this level, you may find there are dependency relationships that can't easily be broken, or some packages that are overly large. At this point you will need to start looking at changing the build configuraton of the packages in question - disabling optional functionalty, removing optional dependencies etc. (usually this would be done by changing
DISTRO_FEATURES, modifying the kernel configuration, changing PACKAGECONFIG options for individual recipes, or if those aren't available modifyingEXTRA_OECONF). How far you want to go with this depends on how much you want to optimise the size of your image.
Quoted 2 lines
If you do find you need to go down the latter path, I'd recommend checking out Darren Hart's presentation "Tuning Embedded Linux - When Less is More" [3].
I changed DISTRO_FEATURES in local.conf to DISTRO_FEATURE = "busybox" but it didn't compile.
Quoted 11 lines
Quoted 3 lines
For example, remove packages like ar, arping, basename, telnet, beep, .....
Note that whilst some of these may be from packages you can remove, many of them may be functionality provided by busybox, i.e. where the command is just a symlink to the busybox binary. You can modify the busybox build-time configuration to disable these, but bear in mind that disabling them usually only saves you a few kB. For some applications that may be a useful saving, of course.
Quoted 6 lines
HTH.
Cheers,
Paul[1]
http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#maintaining-build-output-quality
Quoted 6 lines
[2] https://github.com/jrfonseca/xdot.py
[3] Slides: http://elinux.org/images/2/2b/Elce11_hart.pdf
Video: http://www.youtube.com/watch?v=WHLvI8j31vk
Finally, I found that one way to customize an image is hob. I remove some packages with hob and the size of my root filesystem decreased. The type of output file that generated is .rootfs.ext2.gz but I need .rootfs.ext2.gz.u-boot type. How can I have .rootfs.ext2.gz.u-boot type with hob? Is it possible convert .rootfs.ext2.gz to .rootfs.ext2.gz.u-boot?
Quoted 29 lines · On Monday 27 May 2013 14:56:18 Jack wrote:
Thanks a lot Paul.
Quoted 18 lines · Paul Eggleton
Quoted 9 lines · On Saturday 25 May 2013 13:58:46 Jack wrote:
I maked a fsl-image-minaml rootfs file and customized it with adding particular packages. For example, I added IMAGE_INSTALL_append_pn-fsl-image-minimal = " task-core-ssh-openssh task-core-nfs-server" in local.conf file. The problem is that, the rootfs
file has 6-7 MB capacity but this capacity of file is very high and not acceptable to me. So how can I remove some packages from rootfs file that I
do not want ?There are several different aspects to answering this question.
The list of packages to be installed is composed of several things - the list of packages specified in
IMAGE_INSTALL, packages brought in byIMAGE_FEATURES, and packages brought in to satisfy dependencies of either of the first two.Quoted 7 lines
One way to analyse the contents of your image is to enable buildhistory
[1]
which gives you the full list of installed packages, installed packages by size, as well as graphs (.dot) that will show you the dependency relationships between the packages. These dot graphs can be viewed by converting them to images using the "dot" command (from graphviz) or using a viewer such as xdot [2].
Quoted 5 lines
I enabled buildhistory by adding INHERIT += "buildhistory" and
BUILDHISTORY_COMMIT= "1" to local.conf file. But I got this error :
| error: Failed dependencies:
| libcrypt.so.1(GLIBC_2.0) is needed by inetutils-1.8-r0.ppce500v2
This has nothing to do with buildhistory. Not sure what would cause this but it looks like inetutils depends on libcrypt and for whatever reason that wasn't provided by any package by the time it came to construct the image. Did you change any other settings?
Quoted 2 lines
I changed
DISTRO_FEATURESin local.conf toDISTRO_FEATURE= "busybox" but it didn't compile.
I'm afraid you can't just set DISTRO_FEATURES to "busybox". In particular this will exclude a bunch of eglibc features, some of which are mandatory. You need to understand what you are removing.
Quoted 5 lines
Finally, I found that one way to customize an image is hob. I remove some packages with hob and the size of my root filesystem decreased. The type of output file that generated is .rootfs.ext2.gz but I need .rootfs.ext2.gz.u-boot type. How can I have .rootfs.ext2.gz.u-boot type with hob? Is it possible convert .rootfs.ext2.gz to .rootfs.ext2.gz.u-boot?
Doesn't seem to be a way to do this from hob at the moment (likely due to bug 4386). You could probably run u-boot-mkimage directly to generate the image.
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre