Skip to contentSkip to conversation

USB 2.0 device is not working in USB 3.0 ports

DISCUSSION shrikant 1 participant 1 message Apr 17, 2014

lore
Share & tools
lore

shrikant

author
#0 lore raw

I have a Ubuntu 12.04 system. To that system I have one USB 3.0 port. In this port I am trying use my USB 2.0 device. But every time when I plugged that USB 2.0 device into that USB 3.0 port,system gets hanged though I tired to shutdown but it won't allow me.

But same type of device I used for USB 2.0 it works fine.

So I have a question as " How can allow USB 3.0 port to use USB 2.0 device or did is there any way for converting USB 3.0 port to USB 2.0 port like drivers or something".

Here is my lsub command output

Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 002: ID 046d:0823 Logitech, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 002 Device 009: ID 046d:0823 Logitech, Inc.
Bus 002 Device 008: ID 5555:1110 Epiphan Systems Inc. VGA2USB Bus 002 Device 006: ID 0d8c:0008 C-Media Electronics, Inc. Bus 002 Device 007: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

and for dmesg command output you can refer this http://pastebin.com/ZvM0kGk2
Suggestions can also appreciating. Thanks in advance.