Skip to contentSkip to conversation

Tizen Build Using Yocto - bitbake error mesa_10.1.3.bb,do_configure

DISCUSSION Anoop 1 participant 1 message Aug 21, 2014

lore
Share & tools
lore

Anoop

author
#0 lore raw

Hi

Yocto Build for minimal image

Summary: 1 task failed:
/home/sfm/YOCTO/poky/meta/recipes-graphics/mesa/mesa_10.1.3.bb,
do_configure

*********************************************************************
configure: error: Package requirements (x11-xcb xcb-dri2 >= 1.8 xcb-xfixes) were not met:

No package 'x11-xcb' found
No package 'xcb-dri2' found
No package 'xcb-xfixes' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.

Alternatively, you may set the environment variables XCB_DRI2_CFLAGS and XCB_DRI2_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.

+ '[' 1 '!=' 0 ']'
+ echo 'Configure failed. The contents of all config.log files follows to aid debugging'
Configure failed. The contents of all config.log files follows to aid debugging
+ find /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux- gnueabi/mesa/2_10.1.3-r0/Mesa-10.1.3 -name config.log -print -exec cat '{}' ';'

+ bbfatal 'oe_runconf failed'
+ echo 'ERROR: oe_runconf failed'
ERROR: oe_runconf failed
+ exit 1
+ bb_exit_handler
+ ret=1
+ case $ret in
+ case $BASH_VERSION in
+ echo 'WARNING: /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6- poky-linux-gnueabi/mesa/2_10.1.3-r0/temp/run.do_configure.12232:1 exit 1 from
exit' 1
WARNING: /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux- gnueabi/mesa/2_10.1.3-r0/temp/run.do_configure.12232:1 exit 1 from
exit 1
+ exit 1

CTO/build/tmp/sysroots/i686-linux/usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether arm-poky-linux-gnueabi-gcc -march=armv7-a -mthumb- interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9 -- sysroot=/home/sfm/YOCTO/build/tmp/sysroots/imx6qsabreauto supports - Werror=missing-prototypes... yes
checking whether arm-poky-linux-gnueabi-gcc -march=armv7-a -mthumb- interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9 -- sysroot=/home/sfm/YOCTO/build/tmp/sysroots/imx6qsabreauto supports - fvisibility=hidden... yes
checking whether arm-poky-linux-gnueabi-g++ -march=armv7-a -mthumb- interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9 -- sysroot=/home/sfm/YOCTO/build/tmp/sysroots/imx6qsabreauto supports - fvisibility=hidden... yes
checking whether C compiler accepts -msse4.1... no
checking whether to enable assembly... no, platform not supported checking for dlopen... no
checking for dlopen in -ldl... yes
checking for clock_gettime... yes
checking for posix_memalign... (cached) yes
checking for the pthreads library -lpthreads... no
checking whether pthreads work without any flags... no
checking whether pthreads work with -Kthread... no
checking whether pthreads work with -kthread... no
checking for the pthreads library -llthread... no
checking whether pthreads work with -pthread... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... no
configure: WARNING: GLX disabled, disabling Xlib-GLX
checking for LIBDRM... yes
checking for LIBUDEV... yes
checking for EXPAT... yes
checking for mincore... yes
checking for XCB_DRI2... no
configure: error: Package requirements (x11-xcb xcb-dri2 >= 1.8 xcb-xfixes) were not met:

No package 'x11-xcb' found
No package 'xcb-dri2' found
No package 'xcb-xfixes' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.

Alternatively, you may set the environment variables XCB_DRI2_CFLAGS and XCB_DRI2_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
+ '[' 1 '!=' 0 ']'
+ echo 'Configure failed. The contents of all config.log files follows to aid debugging'
Configure failed. The contents of all config.log files follows to aid debugging
+ find /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux- gnueabi/mesa/2_10.1.3-r0/Mesa-10.1.3 -name config.log -print -exec cat '{}' ';'
+ bbfatal 'oe_runconf failed'
+ echo 'ERROR: oe_runconf failed'
ERROR: oe_runconf failed
+ exit 1
+ bb_exit_handler
+ ret=1
+ case $ret in
+ case $BASH_VERSION in
+ echo 'WARNING: /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6- poky-linux-gnueabi/mesa/2_10.1.3-r0/temp/run.do_configure.12232:1 exit 1 from
exit' 1
WARNING: /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux- gnueabi/mesa/2_10.1.3-r0/temp/run.do_configure.12232:1 exit 1 from
exit 1
+ exit 1
ERROR: Function failed: do_configure (log file is located at /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux- gnueabi/mesa/2_10.1.3-r0/temp/log.do_configure.12232)

Please give inputs to resolve the error