Skip to contentSkip to conversation

mousemode.c ADB Reset patch

DISCUSSION Tom Harrington 1 participant 1 message Dec 22, 1998

lore
Share & tools
lore
#0 lore raw

Below is a patch for mousemode.c that I hacked up. It adds an "ADB reset" option to the code. I don't know if it's useful to anyone not hacking ADB code (and occasionally causing devices to stop responding), but feel free to use it if you like it.

What happens is, if you do "mousemode -1", the address is caught. Rather than try to use the address, the new reset_adb() function is called.

Tom Harrington

--- Cut here ---
5a6,9

Quoted 4 lines

* ADB Reset option added by Tom Harrington ([email protected]). Also changed
* "asm/adb.h" to "asm/adb_mouse.h", which seems to be necessary with
* LinuxPPC R4.
*

18c22,23
< #include <asm/adb.h>
---

Quoted 2 lines

/*#include <asm/adb.h>*/
#include <asm/adb_mouse.h>

109a115,131

Quoted 17 lines

void
reset_adb(void)

{
      /* I don't know if this'll be useful to anyone not hacking ADB code, but you never know. */
      unsigned char y[15];
      y[0] = ADB_PACKET;
      y[1] = ADB_BUSRESET;
      send(y,2);
      listen(y);

      /* My Apple Extended Keyboard II needs flushing after a reset or it'll start sending repeated CRs.
       * Don't know if this is universal, or even common, but it shouldn't hurt. ([email protected])  */
      y[1] = ADB_FLUSH(2);
      send(y,2);
      listen(y);
}

120a143

Quoted 1 line
      printf(" With addr=-1 and no handler, reset the ADB chain.\n");

136a160,163

Quoted 4 lines
    } else if(addr == -1) {
        /* Send a reset */
      printf("Resetting ADB chain\n");
      reset_adb();

--- Cut here ---

[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to [email protected] ]]