Skip to contentSkip to conversation

Stelian Pop <[email protected]>

DISCUSSION Thomas Hood 3 participants 3 messages Oct 3, 2001 – Oct 5, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 7 lines · Stelian Pop
Quoted 3 lines

Well, the funny thing is, the same kernel doesn't boot on a Dell Inspiron laptop either, if PNP is enabled -- and the oops is the same. So it's not just Sony...

Maybe we'll need to test against something like 'pnp_broken' variable instead of is_sony_vaio_laptop in PnP drivers, and add the callbacks in dmi_scan to initialize pnp_broken...

Yes, the "pnp_bios_dont_use_current_config" flag in the driver can be set based on additional criteria.

I notice that both the Vaio and the Inspiron have Phoenix BIOSes. So perhaps there is a class of Phoenix BIOSes we should be testing for. For the time being, we will need to add Ion Badulescu's Inspiron to the dmi_blacklist. Ion, can you give us the exact product name, exact BIOS vendor name, exact BIOS version and exact BIOS date? Also, let us know all the results of your tests of various kernels.

It's interesting to note that my IBM ThinkPad BIOS has a bug that is similar to the bug in your BIOS. After Linux is run, on the subsequent boot the "current" config is not initialized from the "boot" config; instead, all devices are left disabled. This does not happen if Windows was the previous OS run, or if the BIOS is initialized before the boot. My sneaking suspicion is that this behavior is a "feature" of the BIOS: when certain of its functions are accessed it deduces that it is being used by a Plug-n-Play operating system (tm) and so refrains from configuring devices other than the vital ones. My workaround for now is to use "setpnp" to switch on all the configurable devices. The "right" solution may be to use the ESCD functions of the BIOS. Or it may be to stop doing whatever it is that suggests to the BIOS that Linux is a PnP OS.

I started noticing the failing-to-enable-devices behavior back around 2.4.7. What was changed in the PnP BIOS driver around that
time? [ ... time passes while Thomas looks at old patches ...]
Erm, HELLO! I see that in 2.4.6-ac2, someone "cleaned up" the driver so that all the BIOS calls were made through this function "call_pnp_bios". Here's the function:

----------------------------------------------------------------
static inline u16 call_pnp_bios(u16 func, u16 arg1, u16 arg2, u16 arg3,

                                u16 arg4, u16 arg5, u16 arg6, u16 arg7)
{
        unsigned long flags;
        u16 status;
 [...]
        __asm__ __volatile__(
                "pushl %%ebp\n\t"
                "pushl %%edi\n\t"
                "pushl %%esi\n\t"
                "pushl %%ds\n\t"
                "pushl %%es\n\t"
                "pushl %%fs\n\t"
                "pushl %%gs\n\t"
                "pushfl\n\t"
                "movl %%esp, pnp_bios_fault_esp\n\t"
                "movl $1f, pnp_bios_fault_eip\n\t"
                "lcall %5,%6\n\t"
                "1:popfl\n\t"
                "popl %%gs\n\t"
                "popl %%fs\n\t"
                "popl %%es\n\t"
                "popl %%ds\n\t"
                "popl %%esi\n\t"
                "popl %%edi\n\t"
                "popl %%ebp\n\t"
                : "=a" (status)
                : "0" ((func) | (arg1 << 16)),
                  "b" ((arg2) | (arg3 << 16)),
                  "c" ((arg4) | (arg5 << 16)),
                  "d" ((arg6) | (arg7 << 16)),
                  "i" (PNP_CS32),
                  "i" (0)
                : "memory"
        );

[...]
}
----------------------------------------------------------------

Given that the args are u16s and u16s are unsigned shorts, it looks to me as if this is going to zero out all the odd-numbered args. But if that's what's happening then I'm amazed this driver works at all. I see that in some cases the odd-numbered args are zero anyway, but in others not. Result #1: The driver isn't getting a real value for the maximum node size.
But a random value will sometimes not oops the kernel.

Result #2:  PnP BIOS is sometimes getting 0 as its DS selector
Result #3:  The get_dev_node config selector is always 0 (should be 1 or 2)
Result #4:  The set_dev_node handle is 0; but this is duplicated in the

node info structure, so the function may still work. However, the selector number of the node data is wrong

I'm off to patch this bug and see if it fixes my problem. It may fix the Sony and Dell problems too.

Signature · 2 lines
Thomas Hood
(Don't reply to the From: address but to jdthood_AT_yahoo.co.uk)
#1 lore raw
Quoted 6 lines · Thomas Hood

I notice that both the Vaio and the Inspiron have Phoenix BIOSes. So perhaps there is a class of Phoenix BIOSes we should be testing for. For the time being, we will need to add Ion Badulescu's Inspiron to the dmi_blacklist. Ion, can you give us the exact product name, exact BIOS vendor name, exact BIOS version and exact BIOS date? Also, let us know all the results of your tests of various kernels.

dmidecode says:

Handle 0x0000

        DMI type 0, 20 bytes.
        BIOS Information Block
                Vendor: Phoenix Technologies LTD
                Version: A12
                Release: 07/04/2000
                BIOS base: 0xEA3D0
                ROM size: 192K
                Capabilities:
                        Flags: 0x0000000000001F90

Handle 0x0001
DMI type 1, 25 bytes.
System Information Block
Vendor: Dell Computer Corporation
Product: Inspiron 7500
Version: Revision B0
Serial Number: 123456789

and from another laptop exhibiting the same problem:

Handle 0x0000

        DMI type 0, 20 bytes.
        BIOS Information Block
                Vendor: Phoenix Technologies LTD
                Version: A06
                Release: 05/19/2000
                BIOS base: 0xEA380
                ROM size: 192K
                Capabilities:
                        Flags: 0x0000000000001F90

Handle 0x0001
DMI type 1, 25 bytes.
System Information Block
Vendor: Dell Computer Corporation
Product: Inspiron 5000
Version: Revision B0
Serial Number: 123456789

Again: both laptops oops with 2.4.9-ac16 when PnPBIOS is enabled, both work fine with 2.4.10-ac4 even with PnPBIOS enabled.

Ion

Signature · 2 lines
  It is better to keep your mouth shut and be thought a fool,
            than to open it and remove all doubt.
#2 lore raw
In reply to Thomas Hood
Quoted 19 lines · [email protected] (Thomas Hood) writes:
Quoted 7 lines · Stelian Pop
Quoted 3 lines

Well, the funny thing is, the same kernel doesn't boot on a Dell Inspiron laptop either, if PNP is enabled -- and the oops is the same. So it's not just Sony...

Maybe we'll need to test against something like 'pnp_broken' variable instead of is_sony_vaio_laptop in PnP drivers, and add the callbacks in dmi_scan to initialize pnp_broken...

Yes, the "pnp_bios_dont_use_current_config" flag in the driver can be set based on additional criteria.

I notice that both the Vaio and the Inspiron have Phoenix BIOSes. So perhaps there is a class of Phoenix BIOSes we should be testing for. For the time being, we will need to add Ion Badulescu's Inspiron to the dmi_blacklist. Ion, can you give us the exact product name, exact BIOS vendor name, exact BIOS version and exact BIOS date? Also, let us know all the results of your tests of various kernels.

Quoted 10 lines

It's interesting to note that my IBM ThinkPad BIOS has a bug that is similar to the bug in your BIOS. After Linux is run, on the subsequent boot the "current" config is not initialized from the "boot" config; instead, all devices are left disabled. This does not happen if Windows was the previous OS run, or if the BIOS is initialized before the boot. My sneaking suspicion is that this behavior is a "feature" of the BIOS: when certain of its functions are accessed it deduces that it is being used by a Plug-n-Play operating system (tm) and so refrains from configuring devices other than the vital ones.

Hmm. If you are using an AC kernel I seriously suspect the bootflag code, because that is what the code is telling the BIOS to do explicitly.

Quoted 5 lines

My workaround for now is to use "setpnp" to
switch on all the configurable devices. The "right" solution may be to use the ESCD functions of the BIOS. Or it may be to stop doing whatever it is that suggests to the BIOS that Linux is a PnP OS.

Suggests. With the bootflag stuff we are saying treat as a pnpos we know what we are doing.

Eric