Skip to contentSkip to conversation

ACPI problems (was: Re: Synaptics PS/2 driver and 2.6.0-test11)

DISCUSSION Lukas Hejtmanek 2 participants 3 messages Dec 29, 2003 – Dec 30, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

I've found that problem with synaptics is really related to some ACPI troubles. I've suspected synaptics touchpad to do some interrupt bursts and it does. Just single button press and relelase generates about 500 interrupts!!! I wonder if it is driver related or really hardware related...

I've found that modem driver (slamr module for built in soft modem) suffers from the same problem. Gnome battery stat applet freezes connection.

However with 2.4.23 kernel is all OK. So it seems to be something broken with ACPI.

I remind that gnome battery stat applet causes many lost interrupts. (Interrupt timeout in i8042.c)

Signature · 1 line
Lukáš Hejtmánek
#1 lore raw
Quoted 6 lines · Lukas Hejtmanek

Hello,

I've found that problem with synaptics is really related to some ACPI troubles. I've suspected synaptics touchpad to do some interrupt bursts and it does. Just single button press and relelase generates about 500 interrupts!!! I wonder if it is driver related or really hardware related...

That's normal. The hardware generates 80 packets/second and it keeps generating packets 1 second after you stop using the touchpad. Each packet is 6 bytes and the i8042 controller generates one interrupt/byte.

500 interrupts/s shouldn't be any problem to handle though.

Signature · 2 lines
Peter Osterlund - [email protected]
http://w1.894.telia.com/~u89404340
#2 lore raw
Quoted 6 lines · Peter Osterlund

That's normal. The hardware generates 80 packets/second and it keeps generating packets 1 second after you stop using the touchpad. Each packet is 6 bytes and the i8042 controller generates one interrupt/byte.

500 interrupts/s shouldn't be any problem to handle though.

Well it depends. If ACPI disables interrupts or it keeps some spin lock then there is a high probability that some interrupts are lost.

If I do (with no load nor i/o stress):

# time cat /proc/acpi/battery/BAT0/state
present:                 yes
capacity state:          ok
charging state:          unknown
present rate:            unknown
remaining capacity:      4000 mAh
present voltage:         14800 mV
real    0m1.118s
user    0m0.001s
sys     0m0.007s

However for me it looks odd that sound is not corrupted (and I believe that dma buffer does not hold 1 sec of sound data) while serio and soft modem is.

Signature · 1 line
Lukáš Hejtmánek