Add support for HwaCom AmazeTV
Subsystems (2)
v3 cover Add support for HwaCom AmazeTV
From: Carlo Caione <[email protected]>
New DTS to support the HwaCom AmazeTV based on the Meson S905X SoC.
Changelog:
v2:
- Changed DTS name to meson-gxl-s905x-hwacom-amazetv.dts
v3:
- Split patchset in two parts: DTS and documentation update
- Makefile now sorted alphabetically
- DTS nodes now sorted alphabetically
Carlo Caione (2):
dt-bindings: amlogic: Add HwaCom board
ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV
Documentation/devicetree/bindings/arm/amlogic.txt | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 +++++++++++++++++++++ 3 files changed, 166 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
Signature · 1 line
2.12.0
PATCH v3 1/2 dt-bindings: amlogic: Add HwaCom board
From: Carlo Caione <[email protected]>
--- Documentation/devicetree/bindings/arm/amlogic.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/amlogic.txt +1 -0
@@ -45,6 +45,7 @@ Board compatible values: - "amlogic,p212" (Meson gxl s905x) - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) + - "hwacom,amazetv" (Meson gxl s905x) - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
Signature · 1 line
2.12.0
Rob Herring
maintainerPATCH v3 1/2 dt-bindings: amlogic: Add HwaCom board
Quoted 6 lines · Carlo Caione
From: Carlo Caione <[email protected]>
Signed-off-by Carlo Caione <[email protected]>--- Documentation/devicetree/bindings/arm/amlogic.txt | 1 + 1 file changed, 1 insertion(+)
PATCH v3 2/2 ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV
In reply to Carlo CaioneFrom: Carlo Caione <[email protected]>
This patch adds support for the HwaCom AmazeTV set-top-box. The hardware configuration is really similar to the other GXL boards but for this hardware we need to limit the max-frequency of the eMMC to have it working.
--- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 +++++++++++++++++++++ 2 files changed, 165 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
arch/arm64/boot/dts/amlogic/Makefile +1 -0
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts new file +164 -0
164 lines not on this page · raw message
Signature · 1 line
2.12.0
v3 cover Add support for HwaCom AmazeTV
In reply to Carlo CaioneQuoted 12 lines · Carlo Caione
From: Carlo Caione <[email protected]>
New DTS to support the HwaCom AmazeTV based on the Meson S905X SoC.
Changelog:
v2:
- Changed DTS name tomeson-gxl-s905x-hwacom-amazetv.dts
v3:
- Split patchset in two parts: DTS and documentation update
-Makefilenow sorted alphabetically
- DTS nodes now sorted alphabetically
Quoted 3 lines
Carlo Caione (2):
dt-bindings: amlogic: Add HwaCom board
ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV
Applied to v4.12/dt64
Kevin