Skip to contentSkip to conversation

configs: da850evm: enable bootz command

PATCH In review Sekhar Nori 3 participants 4 messages Jul 12, 2016 – Jul 16, 2016

lore
Share & tools
lore

Sekhar Nori

author
#0 lore raw

PATCH 1/1 configs: da850evm: enable bootz command

Enable bootz command on Texas Instruments DA850 EVM board. This helps it boot zImage with device-tree blob passed.

Signed-off-by Sekhar Nori <[email protected]>
---
 configs/da850evm_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/da850evm_defconfig +1 -0
index 0e281a5e672c..40ab975f02b9 100644
@@ -5,6 +5,7 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
 CONFIG_SYS_PROMPT="U-Boot > "
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_ASKENV=y
Signature · 1 line
2.9.0
#1 lore raw

PATCH 1/1 configs: da850evm: enable bootz command

Quoted 5 lines · Sekhar Nori

Enable bootz command on Texas Instruments DA850 EVM board. This helps it boot zImage with device-tree blob passed.

Signed-off-by Sekhar Nori <[email protected]>
Reviewed-by Tom Rini <[email protected]>
Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160712/3f7421a0/attachment.sig>
#3 lore raw
In reply to Sekhar Nori
Quoted 7 lines · Sekhar Nori

Enable bootz command on Texas Instruments DA850 EVM board. This helps it boot zImage with device-tree blob passed.

Signed-off-by Sekhar Nori <[email protected]>
Reviewed-by Tom Rini <[email protected]>
Tested-by Kevin Hilman <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160716/c1280321/attachment.sig>