clk: gxbb: expose CLKID_MMC_PCLK
Subsystems (4)
Kevin Hilman
maintainerPATCH v2 1/1 clk: gxbb: expose CLKID_MMC_PCLK
The MMC_PCLK is needed for the SD/eMMC driver, expose to DT (and comment out in clk driver)
--- drivers/clk/meson/gxbb.h | 2 +- include/dt-bindings/clock/gxbb-clkc.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/clk/meson/gxbb.h +1 -1
@@ -234,7 +234,7 @@#define CLKID_HDMI_PCLK 63#define CLKID_USB1_DDR_BRIDGE 64#define CLKID_USB0_DDR_BRIDGE 65 -#define CLKID_MMC_PCLK 66 +/* CLKID_MMC_PCLK */ #define CLKID_DVIN 67#define CLKID_UART2 68#define CLKID_SANA 69
include/dt-bindings/clock/gxbb-clkc.h +1 -0
@@ -8,5 +8,6 @@#define CLKID_CPUCLK 1#define CLKID_CLK81 12#define CLKID_ETH 36 +#define CLKID_MMC_PCLK 66#endif /* __GXBB_CLKC_H */
Signature · 1 line
2.9.0
Michael Turquette
AppliedPATCH v2 1/1 clk: gxbb: expose CLKID_MMC_PCLK
Quoting Kevin Hilman (2016-07-06 20:38:37)
Quoted 4 lines
The
MMC_PCLKis needed for the SD/eMMC driver, expose to DT (and comment out in clk driver)Signed-off-by Kevin Hilman <[email protected]>
Applied to the same clk-s905 branch if you need to re-pull it as a dependency.
Regards,
Mike
Quoted 32 lines
--- drivers/clk/meson/gxbb.h | 2 +- include/dt-bindings/clock/gxbb-clkc.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)drivers/clk/meson/gxbb.h +1
-1@@ -234,7 +234,7 @@#define CLKID_HDMI_PCLK 63#define CLKID_USB1_DDR_BRIDGE 64#define CLKID_USB0_DDR_BRIDGE 65 -#define CLKID_MMC_PCLK 66 +/* CLKID_MMC_PCLK */ #define CLKID_DVIN 67#define CLKID_UART2 68#define CLKID_SANA 69include/dt-bindings/clock/gxbb-clkc.h +1
-0@@ -8,5 +8,6 @@#define CLKID_CPUCLK 1#define CLKID_CLK81 12#define CLKID_ETH 36 +#define CLKID_MMC_PCLK 66#endif /* __GXBB_CLKC_H */ Signature · 1 line
2.9.0
Kevin Hilman
maintainerPATCH v2 1/1 clk: gxbb: expose CLKID_MMC_PCLK
Quoted 8 lines · Michael Turquette
Quoting Kevin Hilman (2016-07-06 20:38:37)
Quoted 4 lines
The
MMC_PCLKis needed for the SD/eMMC driver, expose to DT (and comment out in clk driver)Signed-off-by Kevin Hilman <[email protected]>Applied to the same clk-s905 branch if you need to re-pull it as a dependency.
Ugh. Just received some updated documentation, and turns out this clock is not used at all. :(
Feel free to revert now before it becomes ABI.
Now that I have actual docs, I'll have a new series coming that will have the right clock details.
Thanks, and sorry for the noise,
Kevin
PATCH v2 1/1 clk: gxbb: expose CLKID_MMC_PCLK
Quoting Kevin Hilman (2016-07-15 09:48:30)
Quoted 8 lines
Quoted 6 lines · Michael Turquette
Quoting Kevin Hilman (2016-07-06 20:38:37)
Quoted 4 lines
The
MMC_PCLKis needed for the SD/eMMC driver, expose to DT (and comment out in clk driver)Signed-off-by Kevin Hilman <[email protected]>
Quoted 7 lines
Quoted 2 lines
Applied to the same clk-s905 branch if you need to re-pull it as a dependency.
Ugh. Just received some updated documentation, and turns out this clock is not used at all. :(
Feel free to revert now before it becomes ABI.
Reverted.
Quoted 3 lines
Now that I have actual docs, I'll have a new series coming that will have the right clock details.
No problem. I did a git revert b/c I don't want to rebase this late in the cycle.
Regards,
Mike
Quoted 4 lines
Thanks, and sorry for the noise,
Kevin