Skip to contentSkip to conversation

regression in linux 3.7 - fan speed at 100% after suspend/resume at 100%

DISCUSSION Sascha Wilde 1 participant 2 messages Mar 9, 2013 – Mar 10, 2013

lore
Share & tools
lore
#0 lore raw

Hi *,

same problem here on my HP Compaq 6910p.

I just tested with vanilla linux 3.8.2 -- unfortunately the problem still persists.[1][2] The last (stable) kernel working for me is 3.6.11.

I'll happily provide any additional information which might help getting this fixed. Just ask... :)

Please CC me in any response, for I'm not subscribed to lkml.

cheers
sascha

[1] FWIW, self build vanilla linux 3.8.2 with very generic config on Debian Wheezy 64bit.
[2] FWIW², I'm under the stron impression that the whole fan control changed in the latest vanilla kernels on my 6910p even before doing a suspend/resume -- it seems to be more "binary" if you will, in that the fan is not running at all for a while and then at a 100% to return back to 0% after doing some serious cooling. With 3.6.11 and older it is more "analogue", with slow fan when only a bit cooling is needed. No idea if this is related to the issue at hand.

Signature · 4 lines
Sascha Wilde

If you think technology can solve your problems you don't understand
technology and you don't understand your problems.  (Bruce Schneier)
#1 lore raw

Sascha Wilde <[email protected]> wrote:
[...]

Quoted 8 lines

[2] FWIW², I'm under the stron impression that the whole fan control changed in the latest vanilla kernels on my 6910p even before doing a suspend/resume -- it seems to be more "binary" if you will, in that the fan is not running at all for a while and then at a 100% to return back to 0% after doing some serious cooling. With 3.6.11 and older it is more "analogue", with slow fan when only a bit cooling is needed. No idea if this is related to the issue at hand.

For that part of the problem I just discovered something that might be a hint on the cause, there is no governor set for the thermal zones:

/sys/devices/virtual/thermal/thermal_zone0/policy : (null) /sys/devices/virtual/thermal/thermal_zone1/policy : (null) /sys/devices/virtual/thermal/thermal_zone2/policy : (null) /sys/devices/virtual/thermal/thermal_zone3/policy : (null) /sys/devices/virtual/thermal/thermal_zone4/policy : (null)

to my understanding this policies should default default to the CONFIG_THERMAL_DEFAULT_GOV_*
configured in the kernel. But it is always (null) for me. And something like

# echo fair_share >/sys/devices/virtual/thermal/thermal_zone0/policy
does not work either.

Or is this expected behavior?

cheers
sascha

Signature · 2 lines
Sascha Wilde : "There are 10 types of people in the world. 
             : Those who understand binary and those who don't."