Full Linux distributions
I'm looking for advice into what Linux distributions (rootfs) people are using for the PowerPC.
Specifically, I'm currently using busybox for my core rootfs, but I'm looking for an alternative that will allow me to:
- easily add new packages
- is binary compatible with the PPC405. 440, and Freescale 85xx cores.
- can be large (compared to the usual embedded devices), say in the
100MB to 1GB range. It will sit on an SD card.
- Can be built/maintained under cygwin, and can generate a ext2
image (e.g. with gen2extfs)
I've been looking at:
1) rolling my own
2) Mainstream distributions (e.g. Debian/Ubuntu have lingering
support from PowerBook days; Gentoo seems like a possibility)
3) OpenEmbedded (doesn't seem to currently support cygwin)
Anybody have any preferences based on what they've used?
Signature · 2 lines
Brian Silverman Concept X, LLC
Hello Brian,
Quoted 5 lines · Brian Silverman
I'm looking for advice into what Linux distributions (rootfs) people are using for the PowerPC.
Specifically, I'm currently using busybox for my core rootfs, but I'm
buildroot I guess, not busybox (alone).
Quoted 5 lines
looking for an alternative that will allow me to:
- easily add new packages- is binary compatible with the PPC405. 440, and Freescale 85xx cores.
binary compatible? You mean it can build binaries for those cores?
Quoted 7 lines
- can be large (compared to the usual embedded devices), say in the 100MB
to 1GB range. It will sit on an SD card.
- Can be built/maintained under cygwin, and can generate a ext2 image
(e.g. with gen2extfs)3) OpenEmbedded (doesn't seem to currently support cygwin)
My preference is to use OpenEmbedded and do so under a Linux host system (any will do).
As I don't want to be tied to a certain host OS, Emdebian or Gentoo-Embedded are no-go for me.
I have used tools and rootfs systems like crosstool, buildroot, LFS before.
There is also LTIB by Freescale, tried that?
Regards,
Signature · 1 line
Leon
Thanks for your response...
Quoted 6 lines · Leon Woestenberg
Quoted 4 lines
- is binary compatible with the PPC405. 440, and Freescale 85xx cores.
binary compatible? You mean it can build binaries for those cores?
What I meant (but said poorly) was that it has pre-compiled binaries. But its fine if I can build it under cygwin. And I am thinking that I may drop the cygwin requirement, because its painful to do linux builds under it.
Quoted 10 lines
My preference is to use OpenEmbedded and do so under a Linux host system (any will do).
As I don't want to be tied to a certain host OS, Emdebian or Gentoo-Embedded are no-go for me.I have used tools and rootfs systems like crosstool, buildroot, LFS before.
There is also LTIB by Freescale, tried that?
I need to look closer at LITB - but I was guessing it didn't have PPC4xx support.
Thanks!
Signature · 2 lines
Brian Silverman Concept X, LLC
Quoted 22 lines · Brian Silverman
Thanks for your response...
Leon Woestenberg wrote:
- is binary compatible with the PPC405. 440, and Freescale 85xx cores.
binary compatible? You mean it can build binaries for those cores?
What I meant (but said poorly) was that it has pre-compiled binaries. But
its fine if I can build it under cygwin. And I am thinking that I may drop the cygwin requirement, because its painful to do linux builds under it.My preference is to use OpenEmbedded and do so under a Linux host
system (any will do).
As I don't want to be tied to a certain host OS, Emdebian or Gentoo-Embedded are no-go for me.I have used tools and rootfs systems like crosstool, buildroot, LFS before.
There is also LTIB by Freescale, tried that?
Quoted 7 lines
I need to look closer at LITB - but I was guessing it didn't have PPC4xx
support.Thanks!
--
Brian Silverman
Concept X, LLC
I've been using the ELDK for an amcc440EP ppc board. It's turned out to be rather convenient, especially when running a networked environment. The guy who primarily maintains it is very helpful also.
Hi Daniel,
Quoted 3 lines
I've been using the ELDK for an amcc440EP ppc board. It's turned out to be rather convenient, especially when running a networked environment.
I'm glad to hear that the ELDK is useful.
Quoted 1 line
The guy who primarily maintains it is very helpful also.
To be honest, the ELDK is maintained by our company. It has become too much for a single individual.
We of course invite others from the community to get involved here. There is a mailinglist[1] to discuss ELDK related topics and all sources needed to build it are available from our git server[2].
One of the inconveniences preventing likely many attempts to get involved is our old build system, which ensures excellent distribution compatibility however.
So one of the first goals I try to invest spare time is to fix the build process into being runnable on modern distros also. We just cannot drop support for the old build environment to be as widely compatible as possible.
Cheers
Detlev
[1] http://lists.denx.de/mailman/listinfo/eldk
[2] http://git.denx.de/
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: [email protected]