H8/300 support update
PATCH 1/1 H8/300 support update
- document update
- fix semaphoe probrem
- fix config
Signature · 2 lines
Yoshinori Sato <[email protected]>
arch/h8300/Kconfig +1 -1
@@ -341,8 +341,8 @@ endmenu -#source drivers/misc/Config.in source "drivers/media/Kconfig" +source "sound/Kconfig" source "fs/Kconfig"
arch/h8300/README +10 -8
@@ -1,9 +1,8 @@ -uClinux-2.4 for H8/300 README +linux-2.6 for H8/300 README Yoshinori Sato <[email protected]> * Supported CPU -H8/300H -H8S is planning. +H8/300H and H8S * Supported Target 1.simulator of GDB
@@ -15,8 +14,11 @@ Akizuki Denshi Tsusho Ltd. <http://www.akizuki.ne.jp> (Japanese Only) 3.H8MAX - Under development - see http://www.strawberry-linux.com (Japanese Only) + see http://ip-sol.jp/h8max/ (Japanese Only) + +4.EDOSK2674 + see http://www.eu.renesas.com/products/mpumcu/tool/edk/support/edosk2674.html + http://www.azpower.com/H8-uClinux/ * Toolchain Version gcc-3.1 or higher and patch
@@ -26,10 +28,10 @@ The environment that can compile a h8300-elf binary is necessary. * Userland Develop environment -Tempolary used h8300-hms(h8300-coff) Toolchain. -I prepare toolchain corresponding to h8300-elf. +used h8300-elf toolchains. +see http://www.uclinux.org/pub/uClinux/ports/h8/ * A few words of thanks -Porting to H8/300H is support of Information-technology Promotion Agency, Japan. +Porting to H8/300 serieses is support of Information-technology Promotion Agency, Japan. I thank support. and All developer/user.
arch/h8300/lib/romfs.S +6 -0
@@ -1,6 +1,7 @@ /* romfs move to __ebss */ #include <asm/linkage.h> +#include <linux/config.h> #if defined(__H8300H__) .h8300h
@@ -9,6 +10,8 @@ .h8300s #endif +#define BLKOFFSET 512 + .text .globl __move_romfs _romfs_sig_len = 8
@@ -31,6 +34,9 @@ add.l er0,er1 /* romfs image end */ mov.l #__ebss,er2 add.l er0,er2 /* distination address */ +#if defined(CONFIG_INTELFLASH) + add.l #BLKOFFSET,er2 +#endif adds #2,er0 adds #1,er0 shlr er0
arch/h8300/platform/h8s/ints.c +2 -3
@@ -1,5 +1,5 @@/* -* linux/arch/h8300/platform/h8sh/ints.c +* linux/arch/h8300/platform/h8s/ints.c * * Yoshinori Sato <[email protected]> *
@@ -20,7 +20,6 @@#include <linux/kernel_stat.h> #include <linux/seq_file.h> #include <linux/init.h> -#include <linux/slab.h> #include <linux/bootmem.h> #include <linux/random.h>
@@ -75,7 +74,7 @@ {H8300_GPIO_P2,H8300_GPIO_B6},{H8300_GPIO_P2,H8300_GPIO_B7}, }; -static int use_kmalloc; +static short use_kmalloc =0 ;extern unsigned long *interrupt_redirect_table;
include/asm-h8300/semaphore.h +8 -4
@@ -101,13 +101,14 @@"mov.l er1,%0\n\t" "bpl 1f\n\t" "ldc r3l,ccr\n\t" +"mov.l %1,er0\n\t" "jsr @___down\n\t" "bra 2f\n" "1:\n\t" "ldc r3l,ccr\n" "2:" : "+m"(*count) - : + : "g"(sem) : "cc", "er1", "er2", "er3"); }
@@ -129,6 +130,7 @@"mov.l er2,%1\n\t" "bpl 1f\n\t" "ldc r1l,ccr\n\t" +"mov.l %2,er0\n\t" "jsr @___down_interruptible\n\t" "bra 2f\n" "1:\n\t"
@@ -136,7 +138,7 @@ "sub.l %0,%0\n\t" "2:\n\t" : "=r" (count),"+m" (*count) - : + : "g"(sem) : "cc", "er1", "er2", "er3");return (int )count; }
@@ -161,6 +163,7 @@"jmp @3f\n\t" LOCK_SECTION_START(".align 2\n\t")"3:\n\t" +"mov.l %2,er0\n\t" "jsr @___down_trylock\n\t" "jmp @2f\n\t" LOCK_SECTION_END
@@ -169,7 +172,7 @@ "sub.l %1,%1\n" "2:" : "+m" (*count),"=r"(count) - : + : "g"(sem) : "cc", "er1","er2", "er3");return (int )count; }
@@ -199,10 +202,11 @@"sub.l er2,er2\n\t" "cmp.l er2,er1\n\t" "bgt 1f\n\t" +"mov.l %1,er0\n\t" "jsr @___up\n" "1:" : "+m"(*count) - : + : "g"(sem) : "cc", "er1", "er2", "er3"); }