Skip to contentSkip to conversation

ARM: dts: meson8: fix the IR receiver pins

PATCH New Martin Blumenstingl 3 participants 3 messages Jun 9, 2017 – Jun 16, 2017

Subsystems (2)
Device tree bindings Arm/Amlogic Meson SoC support
lore
Share & tools
lore

Martin Blumenstingl

author reviewer
#0 lore raw

PATCH 1/1 ARM: dts: meson8: fix the IR receiver pins

The IR receiver pins are currently defined in the CBUS pin-controller. However the pins are in the AO region, which is controlled by the AOBUS pin-controller. Move the pins to pinctrl_aobus so they can actually be used.

Fixes b60e1157d8fa ("ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b")
Signed-off-by Martin Blumenstingl <[email protected]>
---
 arch/arm/boot/dts/meson8.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
arch/arm/boot/dts/meson8.dtsi +7 -7
index 9b0b3ddbb17e..e4f7357b4b31 100644
@@ -116,6 +116,13 @@
 				function = "i2c_mst_ao";
 			};
 		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+			};
+		};
 	};
 };
 

@@ -151,13 +158,6 @@
 			};
 		};
 
-		ir_recv_pins: remote {
-			mux {
-				groups = "remote_input";
-				function = "remote";
-			};
-		};
-
 		eth_pins: ethernet {
 			mux {
 				groups = "eth_tx_clk_50m", "eth_tx_en",
Signature · 1 line
2.13.1
#1 lore raw

PATCH 1/1 ARM: dts: meson8: fix the IR receiver pins

Quoted 34 lines · Martin Blumenstingl

The IR receiver pins are currently defined in the CBUS pin-controller. However the pins are in the AO region, which is controlled by the AOBUS pin-controller. Move the pins to pinctrl_aobus so they can actually be used.

Fixes b60e1157d8fa ("ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b")
Signed-off-by Martin Blumenstingl <[email protected]>
---
 arch/arm/boot/dts/meson8.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
arch/arm/boot/dts/meson8.dtsi +7 -0
index 9b0b3ddbb17e..e4f7357b4b31 100644
@@ -116,6 +116,13 @@
 				function = "i2c_mst_ao";
 			};
 		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+			};
+		};
 	};
 };
 

@@ -151,13 +158,6 @@
 			};
 		};

arch/arm/boot/dts/meson8.dtsi line 163

Quoted 10 lines
arch/arm/boot/dts/meson8.dtsi +0 -7
-		ir_recv_pins: remote {
-			mux {
-				groups = "remote_input";
-				function = "remote";
-			};
-		};
-
 		eth_pins: ethernet {
 			mux {
 				groups = "eth_tx_clk_50m", "eth_tx_en",
Reviewed-by Neil Armstrong <[email protected]>
maintainer Applied
#2 lore raw

PATCH 1/1 ARM: dts: meson8: fix the IR receiver pins

Quoted 8 lines · Neil Armstrong
Quoted 7 lines · Martin Blumenstingl

The IR receiver pins are currently defined in the CBUS pin-controller. However the pins are in the AO region, which is controlled by the AOBUS pin-controller. Move the pins to pinctrl_aobus so they can actually be used.

Fixes b60e1157d8fa ("ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b")
Signed-off-by Martin Blumenstingl <[email protected]>

[..]

Quoted 1 line
Reviewed-by Neil Armstrong <[email protected]>

Applied to v4.13/dt with Neil's ack, will go in round 2 of pull requests to arm-soc.

Kevin