Skip to contentSkip to conversation

Move AT91RM9200DK board support under board/atmel

PATCH New Peter Pearse 4 participants 5 messages Mar 17, 2008 – Mar 19, 2008 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH 1/1 Move AT91RM9200DK board support under board/atmel

Quoted 11 lines

-----Original Message-----
From: wd at denx.de [mailto:wd at denx.de]
Sent: 16 March 2008 22:21
To: Peter Pearse
Cc: Haavard Skinnemoen
Subject: Re: [U-Boot-Users] [PATCH] Move AT91RM9200DK board support under board/atmel

Dear Peter,

-- snip ---

Quoted 2 lines

i. e. something or someone mangled the mail addresses.

-- snip ---

Quoted 7 lines

You see, while the issue looks not really impotant at first glance it might leave a bad (political) aftertaste in cases like here where the attribution of contributions from one company (Atmel) get lost because of modifications done by another company (ARM), especially since both companies have to be seen as competitors.

I believe you misunderstand the relationship between ARM and Atmel here. However, I agree this is unacceptable, and am investigating how it occurred.

Regards

Peter

#2 lore raw

PATCH 1/1 Move AT91RM9200DK board support underboard/atmel

Quoted 24 lines

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of Peter Pearse
Sent: 17 March 2008 11:12
To: wd at denx.de
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] [PATCH] Move AT91RM9200DK board support underboard/atmel

Quoted 9 lines

-----Original Message-----
From: wd at denx.de [mailto:wd at denx.de]
Sent: 16 March 2008 22:21
To: Peter Pearse
Cc: Haavard Skinnemoen
Subject: Re: [U-Boot-Users] [PATCH] Move AT91RM9200DK board support under board/atmel

Dear Peter,

Quoted 9 lines

-- snip ---

Quoted 2 lines

i. e. something or someone mangled the mail addresses.

-- snip ---
However, I agree this is unacceptable, and am investigating how it occurred.

I believe this occurred, after I realized Outlook was reformatting my patches, and before I got Evolution running. I was desperate enough to cut and paste from the GMane list.

My apologies to Haavard.

I will make sure this doesn't happen again

Regards

Peter

Signature · 1 line
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium.  Thank you.
#3 lore raw

PATCH 1/1 Move AT91RM9200DK board support underboard/atmel

Quoted 3 lines · On Mon, 17 Mar 2008 11:56:57 -0000 "Peter Pearse" <[email protected]> wrote:

I believe this occurred, after I realized Outlook was reformatting my patches, and before I got Evolution running. I was desperate enough to cut and paste from the GMane list.

I was suspecting something like that ;)

Quoted 1 line

My apologies to Haavard.

No problem.

Quoted 1 line

I will make sure this doesn't happen again

Good. There's an astonishing number of traps to avoid when sending patches via e-mail...

Haavard

#4 lore raw

PATCH 1/1 Move AT91RM9200DK board support underboard/atmel

Quoted 2 lines · Haavard Skinnemoen

Good. There's an astonishing number of traps to avoid when sending patches via e-mail...

That's why I'm a big fan of "git-send-email". :)

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================

#5 lore raw

PATCH 1/1 Move AT91RM9200DK board support underboard/atmel

In reply to Peter Pearse

Hello Peter & Haavard,

Quoted 7 lines

I believe this occurred, after I realized Outlook was reformatting my patches, and before I got Evolution running. I was desperate enough to cut and paste from the GMane list.

My apologies to Haavard.

I will make sure this doesn't happen again

Our statistics generation process now fixes up the mangled address for Haavard and Bernhard Nemec, the only two authors being hit by this mangling.

The next statistics will accurately reflect facts.

Cheers
Detlev

Signature · 7 lines
Whatever you do will be insignificant,
but it is very important that you do it.
                                        -- Mahatma Gandhi
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de