Add feature-removal-schedule.txt
PATCH 1/1 Add feature-removal-schedule.txt
---
See the following threads for background:
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/48429
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/47755
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/53340
doc/feature-removal-schedule.txt | 37 +++++++++++++++++++++++++++++++++++++ 1 files changed, 37 insertions(+), 0 deletions(-) create mode 100644 doc/feature-removal-schedule.txt
doc/feature-removal-schedule.txt new file +37 -0
@@ -0,0 +1,37 @@ +The following is a list of files and features that are going to be +removed from the U-Boot source tree. Every entry should contain what +exactly is going away, when it will be gone, why it is being removed, +and who is going to be doing the work. When the feature is removed +from U-Boot, its corresponding entry should also be removed from this +file. + +--------------------------- + +What: "autoscr" command +When: August 2009 +Why: "autosrc" is an ugly and completely non-standard name. The "autoscr" + command is deprecated and will be replaced the "source" command as + used by other shells such as bash. Both commands will be supported + for a transition period of 6 months after which "autoscr" will be + removed. +Who: Peter Tyser <[email protected]> + +--------------------------- + +What: Individual I2C commands +When: April 2009 +Why: Per the U-Boot README, individual I2C commands such as "imd", "imm", + "imw", etc are deprecated. The single "i2c" command which is + currently enabled via CONFIG_I2C_CMD_TREE contains the same + functionality as the individual I2C commands. The individual + I2C commands should be removed as well as any references to + CONFIG_I2C_CMD_TREE. +Who: Peter Tyser <[email protected]> + +--------------------------- + +What: Legacy NAND code +When: April 2009 +Why: Legacy NAND code is deprecated. Similar functionality exists in + more recent NAND code ported from the Linux kernel. +Who: Scott Wood <[email protected]>
Signature · 1 line
1.6.0.2.GIT
Wolfgang Denk
AppliedPATCH 1/1 Add feature-removal-schedule.txt
Dear Peter Tyser,
Quoted 10 lines · In message <[email protected]> you wrote:
Signed-off-by Peter Tyser <[email protected]>---
See the following threads for background:
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/48429
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/47755
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/53340doc/feature-removal-schedule.txt | 37 +++++++++++++++++++++++++++++++++++++ 1 files changed, 37 insertions(+), 0 deletions(-) create mode 100644 doc/feature-removal-schedule.txt
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Mistakes are often the stepping stones to utter failure.
PATCH 1/1 Add feature-removal-schedule.txt
In reply to Peter Tyserdoc/feature-removal-schedule.txt line 29
Quoted 10 lines
doc/feature-removal-schedule.txt new file +9
-0+What: Individual I2C commands +When: April 2009 +Why: Per the U-Boot README, individual I2C commands such as "imd", "imm", + "imw", etc are deprecated. The single "i2c" command which is + currently enabled via CONFIG_I2C_CMD_TREE contains the same + functionality as the individual I2C commands. The individual + I2C commands should be removed as well as any references to + CONFIG_I2C_CMD_TREE. +Who: Peter Tyser <[email protected]>
Would people prefer there be a period of time where both the individual i2c commands as well the single "i2c" command are both supported for boards without CONFIG_I2C_CMD_TREE? If so, I'd add some deprecation messages to the individual commands.
Its a little PITA to add a "DEPRECATED" message to all the "old style" commands as they are also called by the newer "i2c" command, so just wanted to check before submitting a patch.
Thanks,
Peter
PATCH 1/1 Add feature-removal-schedule.txt
Hi Peter,
Quoted 15 lines
doc/feature-removal-schedule.txt line 29
Quoted 9 lines
doc/feature-removal-schedule.txt new file +9
-0+What: Individual I2C commands +When: April 2009 +Why: Per the U-Boot README, individual I2C commands such as "imd", "imm", + "imw", etc are deprecated. The single "i2c" command which is + currently enabled via CONFIG_I2C_CMD_TREE contains the same + functionality as the individual I2C commands. The individual + I2C commands should be removed as well as any references to + CONFIG_I2C_CMD_TREE. +Who: Peter Tyser <[email protected]>Would people prefer there be a period of time where both the individual i2c commands as well the single "i2c" command are both supported for boards without
CONFIG_I2C_CMD_TREE? If so, I'd add some deprecation messages to the individual commands.
Quoted 3 lines
Its a little PITA to add a "DEPRECATED" message to all the "old style" commands as they are also called by the newer "i2c" command, so just wanted to check before submitting a patch.
I vote for doing the transition in one step. It's simply not worth too much effort in my eyes. We have other areas needing more attention ;)
Cheers
Detlev
Signature · 8 lines
BUGS:
It is not yet possible to change operating system by writing to
/proc/sys/kernel/ostype.
-- Linux sysctl(2) man page
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de