Initial support for ABB Syscon III
PATCH 1/1 Initial support for ABB Syscon III
From: Sergei Poselenov <[email protected]>
--- MAKEALL | 1 + Makefile | 3 + board/syscon3/Makefile | 53 ++++++ board/syscon3/config.mk | 30 ++++ board/syscon3/law.c | 57 +++++++ board/syscon3/sdram.c | 122 ++++++++++++++ board/syscon3/syscon3.c | 186 ++++++++++++++++++++ board/syscon3/tlb.c | 117 +++++++++++++ board/syscon3/u-boot.lds | 150 +++++++++++++++++ include/configs/syscon3.h | 410 +++++++++++++++++++++++++++++++++++++++++++++ 10 files changed, 1129 insertions(+), 0 deletions(-) create mode 100644 board/syscon3/Makefile create mode 100644 board/syscon3/config.mk create mode 100644 board/syscon3/law.c create mode 100644 board/syscon3/sdram.c create mode 100644 board/syscon3/syscon3.c create mode 100644 board/syscon3/tlb.c create mode 100644 board/syscon3/u-boot.lds create mode 100644 include/configs/syscon3.h
MAKEALL +1 -0
@@ -354,6 +354,7 @@ LIST_85xx=" \ sbc8560 \ stxgp3 \ stxssa \ + syscon3 \ TQM8540 \ TQM8541 \ TQM8555 \
Makefile +3 -0
@@ -2214,6 +2214,9 @@ stxssa_4M_config: unconfig fi @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa +syscon3_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc85xx syscon3 + TQM8540_config \ TQM8541_config \ TQM8555_config \
board/syscon3/Makefile new file +53 -0
53 lines not on this page · raw message
board/syscon3/config.mk new file +30 -0
@@ -0,0 +1,30 @@ +# Copyright 2004 Freescale Semiconductor. +# +# Modified by Sergei Poselenov +# (C) Copyright 2008, Emcraft Systems. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# syscon3 board +# default CCARBAR is at 0xff700000 +# assume U-Boot is less than 256k +# +TEXT_BASE = 0xfffc0000
board/syscon3/law.c new file +57 -0
57 lines not on this page · raw message
board/syscon3/sdram.c new file +122 -0
122 lines not on this page · raw message
board/syscon3/syscon3.c new file +186 -0
186 lines not on this page · raw message
board/syscon3/tlb.c new file +117 -0
117 lines not on this page · raw message
board/syscon3/u-boot.lds new file +150 -0
150 lines not on this page · raw message
include/configs/syscon3.h new file +410 -0
410 lines not on this page · raw message
Signature · 1 line
1.5.4.2
PATCH 1/1 Initial support for ABB Syscon III
Quoted 3 lines · Wolfgang Denk
From: Sergei Poselenov <[email protected]>
Signed-off-by Sergei Poselenov <[email protected]>
Is this board different from the socrates board that went in? The code appears identical (though I admit I did not check thoroughly). Maybe we could unify them into one board, and just condense the tiny differences into a small number of #ifdefs (or even use the config file)?
Andy
PATCH 1/1 Initial support for ABB Syscon III
Hi Andy,
Quoted 10 lines · Wolfgang Denk
Quoted 3 lines
From: Sergei Poselenov <[email protected]>
Signed-off-by Sergei Poselenov <[email protected]>Is this board different from the socrates board that went in? The code appears identical (though I admit I did not check thoroughly). Maybe we could unify them into one board, and just condense the tiny differences into a small number of #ifdefs (or even use the config file)?
Forgot to followup in mail also - syscon iii was renamed in the meantime into socrates. So syscon iii is not needed any more...
Cheers
Detlev
Signature · 5 lines
five monkeys, two typewriters, ten minutes -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de