u-boot-1.2.0 cross compilation fails

Hi All,

I was trying to build u-boot-1.2.0 for atmel (u-boot source code delivered by the board vendor). Tried this:

$ make CROSS_COMPILE=arm-linux- sam9l9260_config
$ make CROSS_COMPILE=arm-linux-

but it failed:

make -C tools all
make[1]: Entering directory /home/sam9l9260/u-boot-1.2.0-atmel/tools' make[1]: *** No rule to make target /usr/lib/gcc/i686-pc-cygwin/3.4.4/include/stddef.h', needed by `img2srec.o'. Stop.
make[1]: Leaving directory `/home/sam9l9260/u-boot-1.2.0-atmel/tools'
make: *** [tools] Error 2

Looks like some header file related to Cygwin (which I don't need use). I'm cross-compiling on Linux etch. Tried poking into Makefile but to no avail.

Thanks,
g.

Hi George,

Complain to where you got the sources from. In the official U-Boot 1.2.0 there is no sam9l9260 support. We cannot help you here much I'm afraid.

Cheers
Detlev

It's very important  that you sleep because that's  when your brain is
garbage  collecting.  And a  dream is  if you  are interrupted  in the
middle and have junk left in the registers.
                                          -- Gerald Sussman
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de