tighten i2c dependancies
A lot of these drivers show up on pretty much every arch regardless of whether they make sense. This adds a bunch of additional dependancies tying down platform specific drivers that are unlikely to be used on other archs.
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig~ +1 -1
@@ -376,7 +376,7 @@ config SCx200_I2C_SDA config SCx200_ACB tristate "NatSemi SCx200 ACCESS.bus" - depends on I2C && PCI + depends on SCx200_I2C && PCI help Enable the use of the ACCESS.bus controllers of a SCx200 processor.
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig~ +11 -11
@@ -7,7 +7,7 @@ menu "I2C Hardware Bus support" config I2C_ALI1535 tristate "ALI 1535" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the SMB Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
@@ -19,7 +19,7 @@ config I2C_ALI1535 config I2C_ALI1563 tristate "ALI 1563" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the SMB Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
@@ -31,7 +31,7 @@ config I2C_ALI1563 config I2C_ALI15X3 tristate "ALI 15x3" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
@@ -41,7 +41,7 @@ config I2C_ALI15X3 config I2C_AMD756 tristate "AMD 756/766/768/8111 and nVidia nForce" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the AMD 756/766/768 mainboard I2C interfaces. The driver also includes
@@ -53,7 +53,7 @@ config I2C_AMD756 config I2C_AMD756_S4882 tristate "SMBus multiplexing on the Tyan S4882" - depends on I2C_AMD756 && EXPERIMENTAL + depends on X86 && I2C_AMD756 && EXPERIMENTAL help Enabling this option will add specific SMBus support for the Tyan S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed
@@ -66,7 +66,7 @@ config I2C_AMD756_S4882 config I2C_AMD8111 tristate "AMD 8111" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the second (SMBus 2.0) AMD 8111 mainboard I2C interface.
@@ -109,7 +109,7 @@ config I2C_HYDRA config I2C_I801 tristate "Intel 82801 (ICH)" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the Intel 801 family of mainboard I2C interfaces. Specifically, the following
@@ -129,7 +129,7 @@ config I2C_I801 config I2C_I810 tristate "Intel 810/815" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL select I2C_ALGOBIT help If you say yes to this option, support will be included for the Intel
@@ -145,7 +145,7 @@ config I2C_I810 config I2C_PIIX4 tristate "Intel PIIX4" - depends on I2C && PCI + depends on X86 && I2C && PCI help If you say yes to this option, support will be included for the Intel PIIX4 family of mainboard I2C interfaces. Specifically, the following
@@ -437,7 +437,7 @@ config I2C_STUB config I2C_VIA tristate "VIA 82C586B" - depends on I2C && PCI && EXPERIMENTAL + depends on (X86 || PPC) && I2C && PCI && EXPERIMENTAL select I2C_ALGOBIT help If you say yes to this option, support will be included for the VIA
@@ -448,7 +448,7 @@ config I2C_VIA config I2C_VIAPRO tristate "VIA 82C596/82C686/823x" - depends on I2C && PCI && EXPERIMENTAL + depends on (X86 || PPC) && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the VIA 82C596/82C686/823x I2C interfaces. Specifically, the following
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig~ +3 -3
@@ -387,7 +387,7 @@ config SCx200_ACB config I2C_SIS5595 tristate "SiS 5595" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the SiS5595 SMBus (a subset of I2C) interface.
@@ -397,7 +397,7 @@ config I2C_SIS5595 config I2C_SIS630 tristate "SiS 630/730" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the SiS630 and SiS730 SMBus (a subset of I2C) interface.
@@ -407,7 +407,7 @@ config I2C_SIS630 config I2C_SIS96X tristate "SiS 96x" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the SiS 96x SMBus (a subset of I2C) interfaces. Specifically, the following
drivers/i2c/busses/Kconfig config I2C_ALI1563 · line 37
Quoted 7 lines · Dave Jones
config
I2C_ALI15X3drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig~ +1
-1tristate "ALI 15x3" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
one of the ali bridges is used on sparc64 aswell, not sure which one.
drivers/i2c/busses/Kconfig config I2C_ALI15X3 · line 47
Quoted 9 lines
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig~ +1
-1@@ -41,7 +41,7 @@ config I2C_ALI15X3 config I2C_AMD756 tristate "AMD 756/766/768/8111 and nVidia nForce" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the AMD 756/766/768 mainboard I2C interfaces. The driver also includes
also used on alpha and ppc64
drivers/i2c/busses/Kconfig config I2C_AMD756_S4882 · line 72
Quoted 7 lines
config
I2C_AMD8111drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig~ +1
-1tristate "AMD 8111" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the second (SMBus 2.0) AMD 8111 mainboard I2C interface.
ppc64
drivers/i2c/busses/Kconfig config I2C_STUB
Quoted 8 lines
config
I2C_PIIX4drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig~ +1
-1tristate "Intel PIIX4" - depends on I2C && PCI + depends on X86 && I2C && PCI help If you say yes to this option, support will be included for the Intel PIIX4 family of mainboard I2C interfaces. Specifically, the following@@ -437,7 +437,7 @@ config I2C_STUB
the PIIX is used on various non-x86 systems, at least ppc and mips come to mind.
Quoted 10 lines · Christoph Hellwig
drivers/i2c/busses/Kconfig config I2C_ALI1563 · line 37
Quoted 7 lines · Dave Jones
config
I2C_ALI15X3drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig~ +1
-1tristate "ALI 15x3" - depends on I2C && PCI && EXPERIMENTAL + depends on X86 && I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.one of the ali bridges is used on sparc64 aswell, not sure which one.
And there's an ALi M1543 on my NEC DDB Vrc-5074 MIPS board.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Quoted 10 lines · Dave Jones
A lot of these drivers show up on pretty much every arch regardless of whether they make sense. This adds a bunch of additional dependancies tying down platform specific drivers that are unlikely to be used on other archs.
Signed-off-by Dave Jones <[email protected]>
drivers/i2c/busses/Kconfig config SCx200_I2C_SDA · line 381
Quoted 7 lines
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig~ +1
-1@@ -376,7 +376,7 @@ config SCx200_I2C_SDA config SCx200_ACB tristate "NatSemi SCx200 ACCESS.bus" - depends on I2C && PCI + depends on SCx200_I2C && PCI help Enable the use of the ACCESS.bus controllers of a SCx200 processor.
This is wrong. The ACCESS.bus driver is an alternative to the bitbanging driver and it's possible to use this driver even without any other SCx200 stuff configured into the kernel.
/Christer
Signature · 4 lines
"Just how much can I get away with and still go to heaven?" Freelance consultant specializing in device driver programming for Linux Christer Weinigel <[email protected]> http://www.weinigel.se