New generic HDLC available
Hi,
I've put new experimental version of my generic HDLC code on
http://hq.pm.waw.pl/hdlc/ ( ftp://ftp.pm.waw.pl/pub/linux/hdlc/experimental/ )
Currently supported (hw drivers) are C101 and N2 (untested) boards. Protocols supported:
- X.25 and PPP (via X.25 and syncppp routines)
- Frame Relay (CCITT and ANSI LMI, or no LMI)
- Cisco HDLC
- raw HDLC (you can select NRZ/NRZI/Manchester/FM codes and parity)
This version uses new ioctl interface. Comments welcome.
No HDLC/FR bridging code yet. No Cisco LMI support (for FR) yet. No docs (except Documentation/networking/generic-hdlc.txt) yet. I'm thinking about implementing asynchronous HDLC driver.
The patch has been generated against 2.4.4-ac6 tree. It should apply to pure 2.4.4 as well. Protocol support is now split into separate files hdlc_fr.c, hdlc_cisco.c etc.
Signature · 2 lines
Krzysztof Halasa Network Administrator
Hi,
Are there any news about the inclusion of these changes in the kernel?
Best regards,
Daniela
Quoted 25 lines · Krzysztof Halasa
Hi,
I've put new experimental version of my generic HDLC code on
http://hq.pm.waw.pl/hdlc/ ( ftp://ftp.pm.waw.pl/pub/linux/hdlc/experimental/ )Currently supported (hw drivers) are C101 and N2 (untested) boards. Protocols supported:
- X.25 and PPP (via X.25 and syncppp routines)
- Frame Relay (CCITT and ANSI LMI, or no LMI)
- Cisco HDLC
- raw HDLC (you can select NRZ/NRZI/Manchester/FM codes and parity)This version uses new ioctl interface. Comments welcome.
No HDLC/FR bridging code yet. No Cisco LMI support (for FR) yet. No docs (except
Documentation/networking/generic-hdlc.txt) yet. I'm thinking about implementing asynchronous HDLC driver.The patch has been generated against 2.4.4-ac6 tree. It should apply to pure 2.4.4 as well. Protocol support is now split into separate files
hdlc_fr.c,hdlc_cisco.cetc.
--
Krzysztof Halasa
Network Administrator
Signature · 9 lines
________________________________________________
Daniela P. R. M. Squassoni
Software Engineer
mailto:[email protected]
Cyclades Corporation - http://www.cyclades.com
________________________________________________Quoted 3 lines · Daniela P. R. Magri Squassoni
Hi,
Are there any news about the inclusion of these changes in the kernel?
...
I'd like to second the query. It's additional work I'd rather avoid to have to track two versions.
Quoted 1 line
Krzysztof Halasa wrote:
...
Quoted 3 lines
Quoted 3 lines
The patch has been generated against 2.4.4-ac6 tree. It should apply to pure 2.4.4 as well. Protocol support is now split into separate files
hdlc_fr.c,hdlc_cisco.cetc.
...
Patches don't work with 2.4.9-ac series kernels.
I've put an updated version against 2.4.9-ac10 in
http://www.xyzzy.org.uk/farsync/hdlc-2.4.9-ac10.patch.gz
if you'd like to grab that.
I notice you include patches for existing kernel drivers and since the farsync driver is now in the 2.4.9 kernel would you like me to supply you with patches for that ?
Signature · 3 lines
Bob Dunlop
FarSite Communications Ltd.
http://www.farsite.co.uk/Hi,
Quoted 1 line · Daniela P. R. Magri Squassoni
Are there any news about the inclusion of these changes in the kernel?
I hope so. However, dscc4.c uses the old version. While I think it's easy to port it to the new one (it should simplify the code in fact), it has to be done.
Signature · 2 lines
Krzysztof Halasa Network Administrator
Quoted 5 lines · Krzysztof Halasa
I hope so. However,
dscc4.cuses the old version. While I think it's easy to port it to the new one (it should simplify the code in fact), it has to be done.
So, let´s talk to the maintainer (François Romieu?). Since your new patch really improves the current Generic HDLC Layer, it shouldn´t take too long to be submitted.
Best regards,
Daniela