Skip to contentSkip to conversation

USB Support for recent Casio Digital Still Cameras, linux-2.4.11

PATCH In review Harald Schreiber 3 participants 3 messages Oct 11, 2001

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 USB Support for recent Casio Digital Still Cameras, linux-2.4.11

Recent Casio QV digital still cameras (for example the QV 4000) show up as
VendorID: 0x07cf ProductID: 0x1001 Revision: 10.00

So the following patch is necessary to make these devices working with the USB storage driver. The patch is against linux-2.4.11, but it should work with any kernel since 2.4.8-pre3.

drivers/usb/storage/unusual_devs.h +4 -3
diff -Naur linux-2.4.11/drivers/usb/storage/unusual_devs.h linux/drivers/usb/storage/unusual_devs.h
@@ -376,14 +376,15 @@
 		US_FL_MODE_XLATE | US_FL_START_STOP ),
 #endif
 
-/* Casio QV 2x00/3x00/8000 digital still cameras are not conformant
- * to the USB storage specification in two ways:
+/* Casio QV 3 / QV 2x00 / QV 3x00 / QV 4000 / QV 8000 digital still cameras
+ * are not conformant  to the USB storage specification in two ways:
  * - They tell us they are using transport protocol CBI. In reality they
  *   are using transport protocol CB.
  * - They don't like the INQUIRY command. So we must handle this command
  *   of the SCSI layer ourselves.
+ * Submitted by Harald Schreiber <[email protected]>.
  */
-UNUSUAL_DEV( 0x07cf, 0x1001, 0x9009, 0x9009,
+UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9009,
                 "Casio",
                 "QV DigitalCamera",
                 US_SC_8070, US_PR_CB, NULL,
Signature · 4 lines
--------------------------------------------------------------------
Dipl.-Math. Harald Schreiber, Nizzaallee 26, D-52072 Aachen, Germany
Phone/Fax: +49-241-9108015/6       mailto:[email protected]
--------------------------------------------------------------------
#1 lore raw
Quoted 7 lines · Harald Schreiber

Recent Casio QV digital still cameras (for example the QV 4000) show up as
VendorID: 0x07cf ProductID: 0x1001 Revision: 10.00

So the following patch is necessary to make these devices working with the USB storage driver. The patch is against linux-2.4.11, but it should work with any kernel since 2.4.8-pre3.

Confirmed. I sent the same patch (without the comments) to linux-kernel three days ago.

BTW, perhaps it would be better to patch the thing the following way, because I don't know what's in the revision number range between 1000 and 9009, perhaps there are other devices which don't like the workaround?

drivers/usb/storage/unusual_devs.h +6 -0
@@ -394,6 +394,12 @@
  * - They don't like the INQUIRY command. So we must handle this command
  *   of the SCSI layer ourselves.
  */
+UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x1000,
+                "Casio",
+                "QV DigitalCamera",
+                US_SC_8070, US_PR_CB, NULL,
+                US_FL_FIX_INQUIRY ),
+
 UNUSUAL_DEV( 0x07cf, 0x1001, 0x9009, 0x9009,
                 "Casio",
                 "QV DigitalCamera",
Quoted 4 lines

--------------------------------------------------------------------
Dipl.-Math. Harald Schreiber, Nizzaallee 26, D-52072 Aachen, Germany
Phone/Fax: +49-241-9108015/6 mailto:[email protected]
--------------------------------------------------------------------

Interesting, twice the same patch, and then from nearly the same location in the world. (Roermonder Str. 112a - distance several 100m )

Jan

#2 lore raw
In reply to Harald Schreiber

In my experience, if you've tested the endpoints on these things, you've covered the middle. I'd rather have the single entry.

Matt

Quoted 43 lines · Jan Niehusmann
Quoted 7 lines · Harald Schreiber

Recent Casio QV digital still cameras (for example the QV 4000) show up as
VendorID: 0x07cf ProductID: 0x1001 Revision: 10.00

So the following patch is necessary to make these devices working with the USB storage driver. The patch is against linux-2.4.11, but it should work with any kernel since 2.4.8-pre3.

Confirmed. I sent the same patch (without the comments) to linux-kernel three days ago.

BTW, perhaps it would be better to patch the thing the following way, because I don't know what's in the revision number range between 1000 and 9009, perhaps there are other devices which don't like the workaround?

drivers/usb/storage/unusual_devs.h +6 -0
@@ -394,6 +394,12 @@
  * - They don't like the INQUIRY command. So we must handle this command
  *   of the SCSI layer ourselves.
  */
+UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x1000,
+                "Casio",
+                "QV DigitalCamera",
+                US_SC_8070, US_PR_CB, NULL,
+                US_FL_FIX_INQUIRY ),
+
 UNUSUAL_DEV( 0x07cf, 0x1001, 0x9009, 0x9009,
                 "Casio",
                 "QV DigitalCamera",
Quoted 5 lines

--------------------------------------------------------------------
Dipl.-Math. Harald Schreiber, Nizzaallee 26, D-52072 Aachen, Germany
Phone/Fax: +49-241-9108015/6 mailto:[email protected]
--------------------------------------------------------------------

Interesting, twice the same patch, and then from nearly the same location in the world. (Roermonder Str. 112a - distance several 100m )

Jan

Signature · 6 lines
Matthew Dharm                              Home: [email protected] 
Maintainer, Linux USB Mass Storage Driver

God, root, what is difference?
					-- Pitr
User Friendly, 11/11/1999