keyboard + PS/2 mouse locks after opening psaux
Hi,
I'm having the following problem: after I start X11 (or gpm with no X) my keyboard and PS/2 mouse sometimes locks up. What could that be?
440BX UP celeron mobo here (Abit - BH6?), '94 AT keyboard, '2000 A4tech 2-wheel mouse, various Linux 2.4 versions (usually -ac, currently 2.4.10ac3). I'm using NVidia Xserver module, but it doesn't seem related (the lookup occured with no X while starting gpm once or twice).
If I kill Xserver (haven't tried with gpm), the keyboard (and mouse) start working again (the next Xserver spawn works fine).
For me, it looks like some race condition between open_aux and mouse (kbd?) interrupt, causing interrupts or kbd controller to stay disabled after the mouse device is opened. The interrupt counters for both kbd and psaux stay constant when I move the mouse and/or press buttons/keyboard keys:
intrepid:~$ cat /proc/interrupts
CPU0
0: 1528212 XT-PIC timer
1: 6 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 189554 XT-PIC serial
9: 1587447 XT-PIC acpi, nvidia
11: 15215 XT-PIC usb-uhci, eth0, eth1
12: 2 XT-PIC PS/2 Mouse
14: 49181 XT-PIC ide0
15: 1 XT-PIC ide1
NMI: 0
ERR: 3I'm currently keeping this machine in locked state, so I can provide more info.
What I also found is that open_aux routine isn't protected by lock_kernel(), while release_aux is. Is that correct? Would a mouse interrupt received before open_aux() is completed cause such a lookup?
Signature · 2 lines
Krzysztof Halasa Network Administrator
Quoted 2 lines · Krzysztof Halasa
I'm having the following problem: after I start X11 (or gpm with no X) my keyboard and PS/2 mouse sometimes locks up. What could that be?
I have the same problem. However the lockup most often occurs after switching with Ctrl+Alt+Fx from plain text console to X. PS/2 mouse + keyboard, gpm running.
Quoted 4 lines
440BX UP celeron mobo here (Abit - BH6?), '94 AT keyboard, '2000 A4tech 2-wheel mouse, various Linux 2.4 versions (usually -ac, currently 2.4.10ac3). I'm using NVidia Xserver module, but it doesn't seem related (the lookup occured with no X while starting gpm once or twice).
I had this problem for quite some time with 2.2.x and 2.4.x kernels, XFree86 3.3.x -- 4.1.0 and S3 Trio3D / NVidia TNT2 M64 / NVidia GeForce2. Lockups with S3 convice me that NVidia module is probably irrelevant here.
Quoted 2 lines
If I kill Xserver (haven't tried with gpm), the keyboard (and mouse) start working again (the next Xserver spawn works fine).
I've found out that ssh'ing to the host and running chvt 1 (as root) helps. Switching back to X usually works fine.
I haven't tried monitoring /proc/interrupts, but even the magic SysRq doesn't work during the lock-up.
P.S. I'm not subscribed to linux-kernel.
Marius Gedminas
Signature · 1 line
"I'll be Bach." -- Johann Sebastian Schwarzenegger
Hi,
The original problem description:
Quoted 8 lines
I'm having the following problem: after I start X11 (or gpm with no X) my keyboard and PS/2 mouse sometimes locks up. What could that be?
440BX UP celeron mobo here (Abit - BH6?), '94 AT keyboard, '2000 A4tech 2-wheel mouse, various Linux 2.4 versions (usually -ac, currently 2.4.10ac3). I'm using NVidia Xserver module, but it doesn't seem related (the lookup occured with no X while starting gpm once or twice).
Quoted 8 lines
If I kill Xserver (haven't tried with gpm), the keyboard (and mouse) start working again (the next Xserver spawn works fine).
For me, it looks like some race condition between
open_auxand mouse (kbd?) interrupt, causing interrupts or kbd controller to stay disabled after the mouse device is opened. The interrupt counters for both kbd and psaux stay constant when I move the mouse and/or press buttons/keyboard keys:
I finally found some free time for investigation. It seems the problem is the mouse + the keyboard controller - it's A4Tech WWW-something mouse with 3 buttons and 2 wheels (PS/2 Intellimouse-compatible). The mother- board is Abit BH6 (slot-1, Intel 440BX + Winbond W83977 - I'm not sure which IC works as the keyboard controller).
The following script hangs on dd (keyboard hangs as well) on my system after few seconds:
q=0;
while :; do
(echo -en '\xe8\x03'; dd bs=1 count=2 >/dev/null)<>/dev/psaux 1>&0;
q=$[$q+1];
echo $q;done
(If you want to check this script on your system, remember it may lock your PS/2 mouse and keyboard and you may need to use remote shell to kill the script - closing /dev/psaux makes keyboard alive again). Of course, it's pointless to run it if you don't have PS/2 mouse. Before running the script, make sure no processes have /dev/psaux open (kill gpm, Xserver etc).
The script basically opens /dev/psaux (the kernel initializes mouse), writes E8 03 (two bytes) there, tries to read 2 bytes back, then closes the psaux. It looks like under some circumstances, the mouse does something really bad to the keyboard controller and then it stops requesting interrupts.
After swapping the mouse with old MS 2-key one, the script no longer hangs the keyboard. I'm not sure if the (A4Tech) mouse can cause malfunction to other machines (with other motherboards), but it doesn't do any harm to my notebook (internal mouse off).
Last accesses to the keyboard controller before a hang (gpm start):
Dec 15 20:46:46 kernel: CMD D4 KBD_CCMD_WRITE_MOUSE Dec 15 20:46:46 kernel: STA 3F Dec 15 20:46:46 kernel: INP FA Dec 15 20:46:46 kernel: STA 3C Dec 15 20:46:46 kernel: OUT F3 AUX_SET_SAMPLE Dec 15 20:46:46 kernel: STA 34 Dec 15 20:46:46 kernel: CMD D4 KBD_CCMD_WRITE_MOUSE Dec 15 20:46:46 kernel: STA 3D Dec 15 20:46:46 kernel: INP FA Dec 15 20:46:46 kernel: STA 3C Dec 15 20:46:46 kernel: OUT 64 (100) Dec 15 20:46:46 kernel: STA 34 Dec 15 20:46:46 kernel: CMD D4 KBD_CCMD_WRITE_MOUSE Dec 15 20:46:46 kernel: STA 3D Dec 15 20:46:46 kernel: INP FA Dec 15 20:46:46 kernel: STA 3C Dec 15 20:46:46 kernel: OUT E8 AUX_SET_RES Dec 15 20:46:46 kernel: STA 34 Dec 15 20:46:46 kernel: CMD D4 KBD_CCMD_WRITE_MOUSE Dec 15 20:46:46 kernel: STA 3F Dec 15 20:46:46 kernel: INP FA Dec 15 20:46:46 kernel: STA 3C Dec 15 20:46:46 kernel: OUT 03 (3) Dec 15 20:46:46 kernel: STA 34 <<<<<<<<<<< status = 34 here Dec 15 20:46:55 root: kbd and mouse dead
CMD - command write, STA - status read, INP - data read, OUT - data write. The last mouse command is E8 03 (AUX_SET_RES 3).
gpm started without a hang:
...
Dec 15 20:44:44 kernel: INP FA Dec 15 20:44:44 kernel: STA 3C Dec 15 20:44:44 kernel: OUT 03 (3) Dec 15 20:44:44 kernel: STA 35 <<<<<<<<<<< status is different here Dec 15 20:44:44 kernel: INP FA Dec 15 20:44:46 kernel: STA 15 Dec 15 20:44:46 kernel: INP 1C Dec 15 20:44:46 kernel: STA 15 Dec 15 20:44:46 kernel: INP 9C Dec 15 20:44:46 kernel: STA 14 Dec 15 20:44:47 root: kbd ok
I've noted that the status after the AUX_SET_RES(3) command is always 0x35 when there is no hang, and 0x34 or 0x36 otherwise.
The question is - is the hardware (kbd controller or mouse) faulty, or should we do something to it in the kernel?
Signature · 2 lines
Krzysztof Halasa Network Administrator