TDA1997x: enable EDID support
Subsystems (2)
PATCH v2 1/1 TDA1997x: enable EDID support
Without this patch, the TDA19971 chip's EDID is inactive. EDID never worked with this driver, it was all tested with HDMI signal sources which don't need EDID support.
Signed-off-by Krzysztof Halasa <[email protected]>
Fixes 9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver")
drivers/media/i2c/tda1997x.c +1 -0
@@ -2233,6 +2233,7 @@ static int tda1997x_core_init(struct v4l2_subdev *sd)/* get initial HDMI status */ state->hdmi_status =io_read (sd,REG_HDMI_FLAGS ); +io_write (sd,REG_EDID_ENABLE ,EDID_ENABLE_A_EN |EDID_ENABLE_B_EN );return 0 ; }
Signature · 5 lines
Krzysztof Hałasa Sieć Badawcza Łukasiewicz Przemysłowy Instytut Automatyki i Pomiarów PIAP Al. Jerozolimskie 202, 02-486 Warszawa