Solo6010 staging driver - kernel panic
Hello Ben,
I'm trying to use your solo6x10 driver with a card based on 6010 chip. The driver seems to detect the card correctly, but when I open /dev/video0 and then close it, I got a kernel panic. I traced the problem to invalid pointers in q->bufs[i]->queue in a call to videobuf_queue_cancel().
The kernel is current Linus' tip (.35-rc4+) + your "staging solo6x10". The same seems to happen with 2.6.34 + the driver included "manually". x86-64. The card is Commell's MP-6010.
It goes like this:
# modprobe solo6x10 video_type=1
solo6x10: module is from the staging directory, the quality is unknown, you have been warned.
solo6010 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 solo6010 0000:08:00.0: Enabled 2 i2c adapters
solo6010 0000:08:00.0: Initialized 1 tw28xx chip: tw2815[1] solo6010 0000:08:00.0: Display as /dev/video0 with 4 inputs (1 extended) solo6010 0000:08:00.0: Encoders as /dev/video1-4
solo6010 0000:08:00.0: Alsa sound card as Softlogic0
# cat /dev/video0 > /dev/null ^C
- videobuf_queue_cancel() called
- about to call list_del(&q->bufs[i]->queue) with:
i = 0
&q->bufs[i]->queue is a valid pointer = 0xffff88033cf97c00 q->bufs[i]->queue.prev = 0xdead000000200200 q->bufs[i]->queue.next = 0xdead000000100100
The backtrace is:videobuf_queue_cancel()__videobuf_read_stop()videobuf_stop()solo_v4l2_release()v4l2_release()fput()filp_close()
...
Any ideas?
Signature · 1 line
Krzysztof Halasa
Quoted 5 lines · Krzysztof Halasa
I'm trying to use your solo6x10 driver with a card based on 6010 chip. The driver seems to detect the card correctly, but when I open
/dev/video0and then close it, I got a kernel panic. I traced the problem to invalid pointers in q->bufs[i]->queue in a call tovideobuf_queue_cancel().
BTW I have fixed it and will work on this driver a bit. Will post the results soon.
Signature · 1 line
Krzysztof Halasa