Skip to contentSkip to conversation

APM on a HP Omnibook XE3

DISCUSSION Robert Szentmihalyi 4 participants 7 messages Aug 30, 2001 – Oct 11, 2001

lore
Share & tools
lore
#0 lore raw

Hi!

Sorry if this is OT.
I'm not sure if this is a kernel issue, but I'm running out of ideas on this....

I have a HP Omnibook XE3 with SuSE Linux 7.2 installed. Everything works fine except suspend-to-disk.
(I have created the partition. It works under Winblows...) I have tried Kernels 2.4.4 and 2.4.7 (with SuSE patches) as well as 2.4.9 vanilla, but I keep getting the same messages:
When I do
apm -s
I get
apm: Input/output error
and the Kernel log says:
apm: suspend: Unable to enter requested state

Any ideas what I could do?

TIA,
Robert

#1 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"robert" == Robert Szentmihalyi <[email protected]> writes:

robert> Hi!
robert> Sorry if this is OT.
robert> I'm not sure if this is a kernel issue, but I'm running out of robert> ideas on this....

robert> I have a HP Omnibook XE3 with SuSE Linux 7.2 installed. robert> Everything works fine except suspend-to-disk.
robert> (I have created the partition. It works under Winblows...) robert> I have tried Kernels 2.4.4 and 2.4.7 (with SuSE patches) as well as robert> 2.4.9 vanilla, but I keep getting the same messages:
robert> When I do
robert> apm -s
robert> I get
robert> apm: Input/output error
robert> and the Kernel log says:
robert> apm: suspend: Unable to enter requested state

robert> Any ideas what I could do?

For me Fn+F12 works.
apm -s & apm -S fails.

Later, Juan.

Signature · 2 lines
In theory, practice and theory are the same, but in practice they 
are different -- Larry McVoy
#2 lore raw
In reply to Robert Szentmihalyi
Quoted 20 lines · Juan Quintela
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"robert" == Robert Szentmihalyi <[email protected]> writes:

robert> Hi!
robert> Sorry if this is OT.
robert> I'm not sure if this is a kernel issue, but I'm running out of robert> ideas on this....

robert> I have a HP Omnibook XE3 with SuSE Linux 7.2 installed. robert> Everything works fine except suspend-to-disk.
robert> (I have created the partition. It works under Winblows...) robert> I have tried Kernels 2.4.4 and 2.4.7 (with SuSE patches) as well as robert> 2.4.9 vanilla, but I keep getting the same messages:
robert> When I do
robert> apm -s
robert> I get
robert> apm: Input/output error
robert> and the Kernel log says:
robert> apm: suspend: Unable to enter requested state

Quoted 4 lines

robert> Any ideas what I could do?

For me Fn+F12 works.
apm -s & apm -S fails.

works only if you have a suspend-on-disk partition.

#3 lore raw
In reply to Robert Szentmihalyi

Am Mittwoch, 10. Oktober 2001 16:02 schrieb Chmouel Boudjnah:

Quoted 22 lines
Quoted 21 lines · Juan Quintela
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

"robert" == Robert Szentmihalyi
<[email protected]> writes:

robert> Hi!
robert> Sorry if this is OT.
robert> I'm not sure if this is a kernel issue, but I'm running out of robert> ideas on this....

robert> I have a HP Omnibook XE3 with SuSE Linux 7.2 installed. robert> Everything works fine except suspend-to-disk. robert> (I have created the partition. It works under Winblows...) robert> I have tried Kernels 2.4.4 and 2.4.7 (with SuSE patches) as well as robert> 2.4.9 vanilla, but I keep getting the same messages: robert> When I do
robert> apm -s
robert> I get
robert> apm: Input/output error
robert> and the Kernel log says:
robert> apm: suspend: Unable to enter requested state

Quoted 3 lines
Quoted 3 lines

robert> Any ideas what I could do?

For me Fn+F12 works.

unfortunately not for me....

Quoted 3 lines
Quoted 1 line

apm -s & apm -S fails.

works only if you have a suspend-on-disk partition.

I have created one with lphdisk and it works under Win2k...

The HP support people say the new omnibook BIOS is not APM compilant any more.
ACPI only...

Suspend-to-disk with API is not yet supported and I can't use software suspend because of reiserfs

I guess I have to wait for proper hibernation support with ACPI....

Signature · 4 lines
Where do you want to be tomorrow?

Entracom. Building Linux systems.
http://www.entracom.de
#4 lore raw
In reply to Robert Szentmihalyi
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line

"robert" == Robert Szentmihalyi <[email protected]> writes:

For me Fn+F12 works.

robert> unfortunately not for me....

You need to have a partition created with the recovery CD, it don't work if you create it with normal fdisk (and it will destroy your data in the disk, do a backup first).

z>> > apm -s & apm -S fails.

Quoted 2 lines
Quoted 2 lines

works only if you have a suspend-on-disk partition.

robert> I have created one with lphdisk and it works under Win2k...

robert> The HP support people say the new omnibook BIOS is not APM robert> compilant any more.

I have the omnibook lastest BIOS as end of July, it will work only with Fn+F12. I don't remind the version, can check when rebooting.

robert> ACPI only...

robert> Suspend-to-disk with API is not yet supported and I can't use robert> software suspend because of reiserfs

robert> I guess I have to wait for proper hibernation support with ACPI....

I am also waiting for it, as I can not suspend to RAM, but suspend to disk is working nicely here (what is an advantage while waiting).

Later, Juan.

Signature · 2 lines
In theory, practice and theory are the same, but in practice they 
are different -- Larry McVoy
#5 lore raw
In reply to Robert Szentmihalyi
Quoted 9 lines · [email protected] (Chmouel Boudjnah) writes:
Quoted 7 lines

robert> I have a HP Omnibook XE3 with SuSE Linux 7.2 installed. robert> Everything works fine except suspend-to-disk. [...]
robert> Any ideas what I could do?

For me Fn+F12 works.
apm -s & apm -S fails.

works only if you have a suspend-on-disk partition.

lphdisk can create such a partition for you (or the tool coming on the HP CD deleting the entire drive).

I have made the experience that hibernation stops to work when GRUB was installed into the bootsector. When installing it into the MBR all things are fine and Fn+F12 suspends to disk. (I have heard reports about a Dell Inspiron 4000, where the opposite situation is the case)

If you have installed the bootloader on hdaX already, you can try to overwrite the first 512 byte with \0 (yes; it's a dangerous operation).

Enrico

#6 lore raw
In reply to Robert Szentmihalyi

Am Mittwoch, 10. Oktober 2001 20:54 schrieb Juan Quintela:

Quoted 10 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
Quoted 2 lines

"robert" == Robert Szentmihalyi
<[email protected]> writes:

For me Fn+F12 works.

robert> unfortunately not for me....

You need to have a partition created with the recovery CD, it don't work if you create it with normal fdisk (and it will destroy your data in the disk, do a backup first).

I have created the hibernation partition with lphdisk and it works under Windows 2000, so I guess there's nothing wrong with it.

Quoted 8 lines

z>> > apm -s & apm -S fails.

Quoted 1 line
Quoted 1 line

works only if you have a suspend-on-disk partition.

robert> I have created one with lphdisk and it works under Win2k...

Quoted 6 lines

robert> The HP support people say the new omnibook BIOS is not APM robert> compilant any more.

I have the omnibook lastest BIOS as end of July, it will work only with Fn+F12. I don't remind the version, can check when rebooting.

Mine reports:
PhoenixBIOS 4.0 Release 6.0
HP OMNIBOOK XE3 BIOS Revision GC.M1.63

Could you check yours?
I'd be really interested...

Quoted 6 lines

robert> ACPI only...

robert> Suspend-to-disk with API is not yet supported and I can't use robert> software suspend because of reiserfs

Quoted 8 lines

robert> I guess I have to wait for proper hibernation support with ACPI....

I am also waiting for it, as I can not suspend to RAM, but suspend to disk is working nicely here (what is an advantage while waiting).

Later, Juan.

so long,
Robert

Signature · 4 lines
Where do you want to be tomorrow?

Entracom. Building Linux systems.
http://www.entracom.de