Dosemu and SCSI

I have problems with scsi! I want to access my CD-RW, and that was possible for me with kernel 2.4 and an earlier version of Dosemu. How can I get it working?

Running on Fedora Core 2, Dosemu-1.3.0.1

In my dosemu.conf file, I have $_aspi = "sg0 sg1 sg2 sg3 sg4 sg5 sg6", and when dosemu starts, I get message about that ASPI is initialized.

Output from cdrecord -scanbus:

Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <[email protected]>.
Note: The author of cdrecord should not be bothered with problems in this version. Linux sg driver version: 3.5.31
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling').
scsibus3:

	3,0,0	300) *
	3,1,0	301) 'iomega  ' 'jaz 1GB         ' 'J.86' Removable Disk
	3,2,0	302) *
	3,3,0	303) 'YAMAHA  ' 'CRW2100S        ' '1.0J' Removable CD-ROM
	3,4,0	304) *
	3,5,0	305) *
	3,6,0	306) *
	3,7,0	307) *

Kernel: 2.6.8-1.

I want to use the Disc at Once package to copy some CD's. Can somebody help me?

Lars

Quoted 30 lines · [email protected] (Lars Bjørndal) writes:

I have problems with scsi! I want to access my CD-RW, and that was possible for me with kernel 2.4 and an earlier version of Dosemu. How can I get it working?

Running on Fedora Core 2, Dosemu-1.3.0.1

In my dosemu.conf file, I have $_aspi = "sg0 sg1 sg2 sg3 sg4 sg5 sg6", and when dosemu starts, I get message about that ASPI is initialized.

Output from cdrecord -scanbus:

Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <[email protected]>.
Note: The author of cdrecord should not be bothered with problems in this version. Linux sg driver version: 3.5.31
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling').
scsibus3:

	3,0,0	300) *
	3,1,0	301) 'iomega  ' 'jaz 1GB         ' 'J.86' Removable Disk
	3,2,0	302) *
	3,3,0	303) 'YAMAHA  ' 'CRW2100S        ' '1.0J' Removable CD-ROM
	3,4,0	304) *
	3,5,0	305) *
	3,6,0	306) *
	3,7,0	307) *

Quoted 6 lines

Kernel: 2.6.8-1.

I want to use the Disc at Once package to copy some CD's. Can somebody help me?

Lars

-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Are there somebody out there who can help me?

The aspi.sys loads, but the cdtools.exe does not find the scsi CD-ROM drive.

Quoted 3 lines · [email protected] (Lars Bjørndal) writes:

I have problems with scsi! I want to access my CD-RW, and that was possible for me with kernel 2.4 and an earlier version of Dosemu. How can I get it working?

Quoted 2 lines · Lars Bjørndal

The aspi.sys loads, but the cdtools.exe does not find the scsi CD-ROM drive.

You can narrow down whether it's a kernel or dosemu issue. You say 2.4 *and* an earlier version. Which version? How about 2.4 with the current dosemu?

I don't have SCSI hardware so it's difficult to test or say much about it.