Skip to contentSkip to conversation

console=ttyS0 doesn't work 2.4.4

DISCUSSION Nick Papadonis 1 participant 2 messages May 4, 2001

lore
Share & tools
lore
#0 lore raw

I compiled the Linux kernel v2.4.4 and can't get 'console=ttyS0,115200 console=tty0' to work. This appended line works fine when I boot into my 2.2.x series kernel.

Anyone have similar problems? Has anyone verified serial console output works with the 2.4.x kernels? Thanks.

- Nick

Here is my /etc/lilo.conf:
boot=/dev/hda
map=/boot/map
install=/boot/boot.b
prompt
timeout=50
message=/boot/message
linear
default=linuxold
append="console=ttyS0,115200 console=tty0"

image=/boot/vmlinuz-2.2.16-22

        label=linuxold
        read-only
        root=/dev/hda6

image=/boot/vmlinuz-2.4.4

        label=linux
        read-only
        root=/dev/hda6
#1 lore raw

Solved. Disregard. I didn't have serial console support compiled in.

Quoted 8 lines · Nick Papadonis

I compiled the Linux kernel v2.4.4 and can't get 'console=ttyS0,115200 console=tty0' to work. This appended line works fine when I boot into my 2.2.x series kernel.

Anyone have similar problems? Has anyone verified serial console output works with the 2.4.x kernels? Thanks.

- Nick