LPC32XX: 004-mmc.2: Enable dma for Phytec board (V2)
PATCH 4/10 LPC32XX: 004-mmc.2: Enable dma for Phytec board (V2)
Enable DMA for phy3250. Without that, the mmc driver is unusable.
Signed-off-by Gabriele Mondada <[email protected]>
---
arm/mach-lpc32xx/phy3250.c +14 -3
@@ -168,6 +168,12 @@ .max_signal = 12, .periph_buses = PL08X_AHB1, }, + { + .bus_id = "mmc", + .min_signal = 4, + .max_signal = 4, + .periph_buses = PL08X_AHB1, + }, };static int pl08x_get_signal (const struct pl08x_channel_data *cd)
@@ -202,9 +208,14 @@ .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | MMC_VDD_33_34, .ios_handler = mmc_handle_ios, - .dma_filter = NULL, -/* No DMA for now since AMBA PL080 dmaengine driver only does scatter -* gather, and the MMCI driver doesn't do it this way */ + .dma_filter = pl08x_filter_id, + .dma_quirks = MCI_DMA_QUIRK_PL18X_RX | MCI_DMA_QUIRK_PL18X_TX, + .dma_rx_param = "mmc", +/* +* When not defined, tx channel is the same as rx. +* Defining dma_tx_param with the same value as dma_rx_param does not +* work. +*/ };static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {