mfd: enable max8925
PATCH 1/1 mfd: enable max8925
Max8925 is a Power Management IC from Maxim Semiconductor.
Do basic support on accessing MAX8925.
Signed-off-by Haojian Zhuang <[email protected]>
--- drivers/mfd/Kconfig | 9 ++ drivers/mfd/Makefile | 2 + drivers/mfd/max8925-core.c | 256 +++++++++++++++++++++++++++++++++++++++++++ drivers/mfd/max8925-i2c.c | 202 ++++++++++++++++++++++++++++++++++ include/linux/mfd/max8925.h | 112 +++++++++++++++++++ 5 files changed, 581 insertions(+), 0 deletions(-) create mode 100644 drivers/mfd/max8925-core.c create mode 100644 drivers/mfd/max8925-i2c.c create mode 100644 include/linux/mfd/max8925.h
drivers/mfd/Kconfig +9 -0
@@ -160,6 +160,15 @@ config PMIC_DA903X individual components like LCD backlight, voltage regulators, LEDs and battery-charger under the corresponding menus. +config MFD_MAX8925 + tristate "Maxim Semiconductor MAX8925 PMIC Support" + depends on I2C + help + Say yes here to support for Maxim Semiconductor MAX8925. This is + a Power Management IC. This driver provies common support for + accessing the device, additional drivers must be enabled in order + to use the functionality of the device. + config MFD_WM8400 tristate "Support Wolfson Microelectronics WM8400" select MFD_CORE
drivers/mfd/Makefile +2 -0
@@ -44,6 +44,8 @@ endif obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o obj-$(CONFIG_PMIC_DA903X) += da903x.o +max8925-objs := max8925-core.o max8925-i2c.o +obj-$(CONFIG_MFD_MAX8925) += max8925.o obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
drivers/mfd/max8925-core.c new file +256 -0
256 lines not on this page · raw message
drivers/mfd/max8925-i2c.c new file +202 -0
202 lines not on this page · raw message
include/linux/mfd/max8925.h new file +112 -0
112 lines not on this page · raw message
Signature · 1 line
1.5.6.5