Add support for 720Mhz
PATCH 1/1 Add support for 720Mhz
A New API to allow setting M value to support 720Mhz
Signed-off-by Syed Mohammed Khasim <[email protected]>
--- cpu/arm_cortexa8/omap3/clock.c | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-)
cpu/arm_cortexa8/omap3/clock.c +21 -0
@@ -402,3 +402,24 @@ void per_clocks_enable(void)sdelay (1000 ); } + +/* +* Configure PRCM registers to get 720 Mhz +* +* NOTE: N value doesn't change, only M gets affected +*/ +void prcm_config_720mhz (void ) +{ +struct prcm *prcm_base = (struct prcm *)PRCM_BASE ; + +/* Unlock MPU DPLL (slows things down, and needed later) */ +sr32 (&prcm_base->clken_pll_mpu,0 ,3 ,PLL_LOW_POWER_BYPASS ); +wait_on_value (ST_MPU_CLK ,0 , &prcm_base->idlest_pll_mpu,LDELAY ); + +/* Set M */ +sr32 (&prcm_base->clksel1_pll_mpu,8 ,11 ,0x2D0 ); + +/* lock mode */ +sr32 (&prcm_base->clken_pll_mpu,0 ,3 ,PLL_LOCK ); +wait_on_value (ST_MPU_CLK ,1 , &prcm_base->idlest_pll_mpu,LDELAY ); +}
Signature · 1 line
1.5.6.3