regulator: add max8925 support
PATCH 1/1 regulator: add max8925 support
MAX8925 contains 3 Buck and 20 LDO regulator.
Signed-off-by Haojian Zhuang <[email protected]>
--- drivers/regulator/Kconfig | 6 + drivers/regulator/Makefile | 1 + drivers/regulator/max8925.c | 346 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 353 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/max8925.c
drivers/regulator/Kconfig +6 -0
@@ -69,6 +69,12 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX8925 + tristate "Maxim MAX8925 Power Management IC" + depends on MFD_MAX8925 + help + Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. + config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TPS695x0 PMIC" depends on TWL4030_CORE
drivers/regulator/Makefile +0 -0
@@ -11,6 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) +=
userspace-consumer.o
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
+obj-$(CONFIG_REGULATOR_MAX8925) += max8925.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
drivers/regulator/max8925.c new file +346 -0
346 lines not on this page · raw message
Signature · 1 line
1.5.6.5