Skip to contentSkip to conversation

pxa: enable L2 if present in XSC3

PATCH New Haojian Zhuang 1 participant 1 message Dec 30, 2009 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pxa: enable L2 if present in XSC3

Check whether L2 is present or not in XSC3. If it's present, enable L2 immediately.

Disabling L2 after L2 is enabled that would result in unpredicatable behavior of XSC3 processor.

---
 arch/arm/mm/proc-xsc3.S |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)
arch/arm/mm/proc-xsc3.S +5 -0
index 33515c2..8fbe21f 100644
@@ -406,6 +406,11 @@ __xsc3_setup:
 
 	adr	r5, xsc3_crval
 	ldmia	r5, {r5, r6}
+
+	mrc	p15, 1, r0, c0, c0, 1		@ get L2 present information
+	ands	r0, r0, #0xf8
+	orrne	r6, r6, #(1 << 26)		@ enable L2 if present
+
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
 	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
 	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)
Signature · 1 line
1.5.6.5