s3c64xx: Add ifdef at the S3C64XX only codes
PATCH 1/1 s3c64xx: Add ifdef at the S3C64XX only codes
The s3c6400.h file is only for S3C64XX cpu and the pheripheral port address(0x70000000 - 0x7fffffff) exists at only S3C64XX cpu, so they should be included by only S3C64XX cpu.
Signed-off-by Joonyoung Shim <[email protected]>
--- cpu/arm1176/cpu.c | 2 ++ cpu/arm1176/start.S | 4 ++++ 2 files changed, 6 insertions(+), 0 deletions(-)
cpu/arm1176/cpu.c +2 -0
@@ -33,7 +33,9 @@#include <common.h> #include <command.h> +#ifdef CONFIG_S3C64XX #include <asm/arch/s3c6400.h> +#endif #include <asm/system.h> static void cache_flush (void );
cpu/arm1176/start.S +4 -0
@@ -35,7 +35,9 @@ #ifdef CONFIG_ENABLE_MMU #include <asm/proc/domain.h> #endif +#ifdef CONFIG_S3C64XX #include <asm/arch/s3c6400.h> +#endif #if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE) #define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE
@@ -190,10 +192,12 @@ mmu_disable: #endif mmu_disable_phys: +#ifdef CONFIG_S3C64XX /* Peri port setup */ ldr r0, =0x70000000 orr r0, r0, #0x13 mcr p15,0,r0,c15,c2,4 @ 256M (0x70000000 - 0x7fffffff) +#endif /* * Go setup Memory and board specific bits prior to relocation.
Signature · 1 line
1.6.3.3