The patch fixes the bug of partial intialization of
PATCH 1/1 The patch fixes the bug of partial intialization of
global network parameters.
Upon u-boot's start up the first ping command causes a failure of the consequent TFTP transfers. It happens in the recently added mechanism of NetLoop initialization where initialization of global network parameters is separated in the NetInitLoop routine which is called per env_id change. Thus, ping request will initialize the network parameters necessary for pin= g
operation only, afterwards the env_changed_id will be set to the env_id that will prevent all following initialization requests from other protocol= s.
The problem is that the initialized by ping subset of network parameters is=
not
sufficient for other protocols and particularly for TFTP
which requires the NetServerIp also.
---
net/net.c | 66 +++++----------------------------------------------------=
---
1 files changed, 6 insertions(+), 60 deletions(-)
net/net.c +6 -60
@@ -288,64 +288,13 @@ NetInitLoop(proto_t protocol) if (env_changed_id =3D=3D env_id)return 0 ; -switch (protocol) { -#if defined(CONFIG_CMD_NFS ) -case NFS : -#endif -#if defined(CONFIG_CMD_PING ) -case PING : -#endif -#if defined(CONFIG_CMD_SNTP ) -case SNTP : -#endif -case NETCONS : -case TFTP : -NetCopyIP (&NetOurIP, &bd->bi_ip_addr); - NetOurGatewayIP =3D getenv_IPaddr ("gatewayip"); - NetOurSubnetMask=3D getenv_IPaddr ("netmask"); - NetOurVLAN =3D getenv_VLAN("vlan"); - NetOurNativeVLAN =3D getenv_VLAN("nvlan"); +NetCopyIP (&NetOurIP, &bd->bi_ip_addr); + NetOurGatewayIP =3D getenv_IPaddr ("gatewayip"); + NetOurSubnetMask=3D getenv_IPaddr ("netmask"); + NetServerIP =3D getenv_IPaddr ("serverip"); + NetOurNativeVLAN =3D getenv_VLAN("nvlan"); + NetOurVLAN =3D getenv_VLAN("vlan"); -switch (protocol) { -#if defined(CONFIG_CMD_NFS ) -case NFS : -#endif -case NETCONS : -case TFTP : - NetServerIP =3D getenv_IPaddr ("serverip"); -break ; -#if defined(CONFIG_CMD_PING ) -case PING : -/* nothing */ -break ; -#endif -#if defined(CONFIG_CMD_SNTP ) -case SNTP : -/* nothing */ -break ; -#endif -default : -break ; - } - -break ; -case BOOTP : -case RARP : -/* -* initialize our IP addr to 0 in order to accept ANY -* IP addr assigned to us by the BOOTP / RARP server -*/ - NetOurIP =3D 0; - NetServerIP =3D getenv_IPaddr ("serverip"); - NetOurVLAN =3D getenv_VLAN("vlan"); /* VLANs must be read */ - NetOurNativeVLAN =3D getenv_VLAN("nvlan"); -case CDP : - NetOurVLAN =3D getenv_VLAN("vlan"); /* VLANs must be read */ - NetOurNativeVLAN =3D getenv_VLAN("nvlan"); -break ; -default : -break ; - } env_changed_id =3D env_id;return 0 ; }
@@ -440,10 +389,7 @@ restart:#if defined(CONFIG_CMD_DHCP )case DHCP : -/* Start with a clean slate... */ BootpTry =3D 0; - NetOurIP =3D 0; - NetServerIP =3D getenv_IPaddr ("serverip");DhcpRequest ();/* Basically same as BOOTP */ break ;#endif
--=20
1.5.6.3