mmp: support ssp in pxa168
Subsystems (3)
PATCH 1/1 mmp: support ssp in pxa168
Support ssp in pxa168. The basic function of SSP is same as pxa, but clock source and IRQ is changed.
--- arch/arm/mach-mmp/include/mach/irqs.h | 10 +- arch/arm/mach-mmp/include/mach/pxa168.h | 21 ++++ arch/arm/mach-mmp/include/mach/regs-apbc.h | 10 +- arch/arm/mach-mmp/include/mach/regs-mpmu.h | 48 ++++++++++ arch/arm/mach-mmp/include/mach/regs-ssp.h | 141 ++++++++++++++++++++++++++++ arch/arm/mach-mmp/pxa168.c | 15 +++ arch/arm/plat-pxa/include/plat/ssp.h | 2 + arch/arm/plat-pxa/ssp.c | 1 + 8 files changed, 238 insertions(+), 10 deletions(-) create mode 100644 arch/arm/mach-mmp/include/mach/regs-mpmu.h create mode 100644 arch/arm/mach-mmp/include/mach/regs-ssp.h
(quoted diff) +0 -0
b/arch/arm/mach-mmp/include/mach/irqs.h
index 0270119..b379cde 100644
arch/arm/mach-mmp/include/mach/irqs.h +5 -5
@@ -5,10 +5,10 @@* Interrupt numbers for PXA168 */ #define IRQ_PXA168_NONE (-1) -#define IRQ_PXA168_SSP3 0 -#define IRQ_PXA168_SSP2 1 -#define IRQ_PXA168_SSP1 2 -#define IRQ_PXA168_SSP0 3 +#define IRQ_PXA168_SSP4 0 +#define IRQ_PXA168_SSP3 1 +#define IRQ_PXA168_SSP2 2 +#define IRQ_PXA168_SSP1 3#define IRQ_PXA168_PMIC_INT 4#define IRQ_PXA168_RTC_INT 5#define IRQ_PXA168_RTC_ALARM 6
@@ -20,7 +20,7 @@#define IRQ_PXA168_TIMER2 14#define IRQ_PXA168_TIMER3 15#define IRQ_PXA168_CMU 16 -#define IRQ_PXA168_SSP4 17 +#define IRQ_PXA168_SSP5 17#define IRQ_PXA168_MSP_WAKEUP 19#define IRQ_PXA168_CF_WAKEUP 20#define IRQ_PXA168_XD_WAKEUP 21
(quoted diff) +0 -0
b/arch/arm/mach-mmp/include/mach/pxa168.h
index 3ad612c..3b2bd5d 100644
arch/arm/mach-mmp/include/mach/pxa168.h +21 -0
@@ -14,6 +14,11 @@ extern struct pxa_device_desc pxa168_device_pwm1;extern struct pxa_device_desc pxa168_device_pwm2;extern struct pxa_device_desc pxa168_device_pwm3;extern struct pxa_device_desc pxa168_device_pwm4; +extern struct pxa_device_desc pxa168_device_ssp1; +extern struct pxa_device_desc pxa168_device_ssp2; +extern struct pxa_device_desc pxa168_device_ssp3; +extern struct pxa_device_desc pxa168_device_ssp4; +extern struct pxa_device_desc pxa168_device_ssp5;extern struct pxa_device_desc pxa168_device_nand;static inline int pxa168_add_uart (int id)
@@ -67,6 +72,22 @@ static inline int pxa168_add_pwm(int id)return pxa_register_device (d,NULL ,0 ); } +static inline int pxa168_add_ssp (int id) +{ +struct pxa_device_desc *d =NULL ; + +switch (id) { +case 1 : d = &pxa168_device_ssp1;break ; +case 2 : d = &pxa168_device_ssp2;break ; +case 3 : d = &pxa168_device_ssp3;break ; +case 4 : d = &pxa168_device_ssp4;break ; +case 5 : d = &pxa168_device_ssp5;break ; +default : +return -EINVAL ; + } +return pxa_register_device (d,NULL ,0 ); +} +static inline int pxa168_add_nand (struct pxa3xx_nand_platform_data *info) {return pxa_register_device (&pxa168_device_nand, info,sizeof (*info));
(quoted diff) +0 -0
b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 712af03..1a96585 100644
arch/arm/mach-mmp/include/mach/regs-apbc.h +5 -5
@@ -26,8 +26,6 @@#define APBC_PXA168_PWM2 APBC_REG(0x010)#define APBC_PXA168_PWM3 APBC_REG(0x014)#define APBC_PXA168_PWM4 APBC_REG(0x018) -#define APBC_PXA168_SSP1 APBC_REG(0x01c) -#define APBC_PXA168_SSP2 APBC_REG(0x020)#define APBC_PXA168_RTC APBC_REG(0x028)#define APBC_PXA168_TWSI0 APBC_REG(0x02c)#define APBC_PXA168_KPC APBC_REG(0x030)
@@ -35,14 +33,16 @@#define APBC_PXA168_AIB APBC_REG(0x03c)#define APBC_PXA168_SW_JTAG APBC_REG(0x040)#define APBC_PXA168_ONEWIRE APBC_REG(0x048) -#define APBC_PXA168_SSP3 APBC_REG(0x04c)#define APBC_PXA168_ASFAR APBC_REG(0x050)#define APBC_PXA168_ASSAR APBC_REG(0x054) -#define APBC_PXA168_SSP4 APBC_REG(0x058) -#define APBC_PXA168_SSP5 APBC_REG(0x05c)#define APBC_PXA168_TWSI1 APBC_REG(0x06c)#define APBC_PXA168_UART3 APBC_REG(0x070)#define APBC_PXA168_AC97 APBC_REG(0x084) +#define APBC_PXA168_SSP1 APBC_REG(0x81c) +#define APBC_PXA168_SSP2 APBC_REG(0x820) +#define APBC_PXA168_SSP3 APBC_REG(0x84c) +#define APBC_PXA168_SSP4 APBC_REG(0x858) +#define APBC_PXA168_SSP5 APBC_REG(0x85c)/* * APB Clock register offsets for PXA910
(quoted diff) +0 -0
b/arch/arm/mach-mmp/include/mach/regs-mpmu.h
new file mode 100644
index 0000000..0d57236
arch/arm/mach-mmp/include/mach/regs-mpmu.h new file +48 -0
48 lines not on this page · raw message
(quoted diff) +0 -0
b/arch/arm/mach-mmp/include/mach/regs-ssp.h
new file mode 100644
index 0000000..7e16eeb
arch/arm/mach-mmp/include/mach/regs-ssp.h new file +29 -0
@@ -0,0 +1,141 @@ +#ifndef __ASM_ARCH_REGS_SSP_H +#define __ASM_ARCH_REGS_SSP_H + +/* +* SSP Serial Port Registers +*/ + +#define SSCR0 (0x00)/* SSP Control Register 0 */ +#define SSCR1 (0x04)/* SSP Control Register 1 */ +#define SSSR (0x08)/* SSP Status Register */ +#define SSITR (0x0C)/* SSP Interrupt Test Register */ +#define SSDR (0x10)/* SSP Data Write/Data Read Register */ + +#define SSTO (0x28)/* SSP Time Out Register */ +#define SSPSP (0x2C)/* SSP Programmable Serial Protocol */ +#define SSTSA (0x30)/* SSP Tx Timeslot Active */ +#define SSRSA (0x34)/* SSP Rx Timeslot Active */ +#define SSTSS (0x38)/* SSP Timeslot Status */ + +#if defined(CONFIG_CPU_PXA910 ) +#define SSACD (0x3C)/* SSP Audio Clock Divider */ +#define SSACDD (0x40)/* SSP Audio Clock Dither Divider */ +#endif + +/* Common bits first */ +#define SSCR0_DSS_MASK (0x0000000f)/* Data Size Select (mask) */ +#define SSCR0_DSS (x) ((x) - 1)/* Data Size Select [4..16] */ +#define SSCR0_FRF (0x3 << 4)/* FRame Format (mask) */ +#define SSCR0_Motorola (0x0 << 4)/* Motorola's Serial Peripheral
Interface (SPI) */
+#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial
Protocol (SSP) */
+#define SSCR0_National (0x2 << 4) /* National Microwire */
+#define SSCR0_PSP (0x3 << 4) /* Programmable Serial Protocol (PSP) */
+#define SSCR0_ECS (1 << 6) /* External clock select */
+#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
+
+#define SSCR0_SCR (0xfff << 8) /* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ +
+#define SSCR0_EDSS (1 << 20) /* Extended data size select */
+#define SSCR0_NCS (1 << 21) /* Network clock select */
+#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TIM (1 << 23) /* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC (0x7 << 24) /* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per
frame [1..8] */
+#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */
+#define SSCR0_ACS (1 << 30) /* Audio clock select */
+#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
+
+#if defined(CONFIG_CPU_PXA168) || defined(CONFIG_CPU_PXA910)
+#define SSCR0_MODE_52M (1 << 27) /* 52Mbps Mode */
+#endif
+
+#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
+#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_TFT_MASK (0xf << 6) /* Transmit FIFO Threshold (mask) */
+#define SSCR1_TFT(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT_MASK (0xf << 10) /* Receive FIFO Threshold (mask) */
+#define SSCR1_RFT(x) (((x) - 1) << 10) /* level [1..16] */
+#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/read */
+#define SSCR1_STRF (1 << 15) /* Select FIFO for EFWR */
+#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */
+#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */
+#define SSCR1_TINTE (1 << 19) /* Receiver Timeout Interrupt Enable */
+#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
+#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
+#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
+#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
+#define SSCR1_SFRMDIR (1 << 24) /* SSP Frame (SSPSFRMx) Direction */
+#define SSCR1_SCLKDIR (1 << 25) /* SSP Serial Bit Rate Clock
(SSPSCLKx) Direction */
+#define SSCR1_ECRB (1 << 26) /* Enable Clock Request B */
+#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
+#define SSCR1_SCFR (1 << 28) /* Slave Clock Free Running */
+#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error Interrupt */
+#define SSCR1_TTE (1 << 30) /* TxD Three-state Enable */
+#define SSCR1_TTELP (1 << 31) /* TxD Three-state Enable On Last Phase */
+
+#if defined(CONFIG_CPU_PXA910)
+#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
+#endif
+
+#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
+#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
+#define SSSR_BSY (1 << 4) /* SSP Busy */
+#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
+#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
+#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
+#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level (mask) */
+#define SSSR_TFL(x) ((x) << 8)
+#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level */
+#define SSSR_RFL(x) ((x) << 12)
+#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
+#define SSSR_TINT (1 << 19) /* Receiver Timeout Interrupt */
+#define SSSR_EOC (1 << 20) /* End of Chain */
+#define SSSR_TUR (1 << 21) /* Transmit FIFO Underrun */
+#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
+#define SSSR_BCE (1 << 23) /* Bit Count Error */
+#define SSSR_TX_OSS (1 << 30) /* Tx FIFO Odd Sample Status */
+#define SSSR_OSS (1 << 31) /* Odd Sample Status */
+
+#define SSITR_TTFS (1 << 5) /* Test Tx FIFO Service Request */
+#define SSITR_TRFS (1 << 6) /* Test Rx FIFO Service Request */
+#define SSITR_TROR (1 << 7) /* Test Rx FIFO Overrun */
+
+#define SSPSP_SCMODE_MASK (0x3) /* Serial Bit Rate Clock Mode */
+#define SSPSP_SCMODE(x) ((x) << 0)
+#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
+#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
+#define SSPSP_STRTDLY_MASK (0x7 << 4) /* Start Delay */
+#define SSPSP_STRTDLY(x) ((x) << 4)
+#define SSPSP_DMYSTRT_MASK (0x3 << 7) /* Dummy Start */
+#define SSPSP_DMYSTRT(x) ((x) << 7)
+#define SSPSP_SFRMDLY_MASK (0x7f << 9) /* Serial Frame Delay */
+#define SSPSP_SFRMDLY(x) ((x) << 9)
+#define SSPSP_SFRMWDTH_MASK (0x3f << 16) /* Serial Frame Width */
+#define SSPSP_SFRMWDTH(x) ((x) << 16)
+#define SSPSP_DMYSTOP_MASK (0x3 << 23) /* Dummy Stop */
+#define SSPSP_DMYSTOP(x) ((x) << 23)
+#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
+#define SSPSP_EDMYSTRT_MASK (0x3 << 26) /* Extended Dummy Start */
+#define SSPSP_EDMYSTRT(x) ((x) << 26)
+#define SSPSP_EDMYSTOP_MASK (0x7 << 28) /* Extended Dummy Stop */
+#define SSPSP_EDMYSTOP(x) ((x) << 28)
+#define SSPSP_TIMING_MASK (SSPSP_STRTDLY_MASK | SSPSP_DMYSTRT_MASK \
+ | SSPSP_SFRMDLY_MASK | SSPSP_SFRMWDTH_MASK \ + | SSPSP_DMYSTOP_MASK | SSPSP_EDMYSTRT_MASK \ + | SSPSP_EDMYSTOP_MASK | SSPSP_FSRT)
+
+
+#if defined(CONFIG_CPU_PXA910)
+#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
+#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
+#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */
+#endif
+
+
+#endif /* __ASM_ARCH_REGS_SSP_H */
+
arch/arm/mach-mmp/pxa168.c +10 -0
@@ -72,6 +72,11 @@ static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000); +static APBC_CLK(ssp1, PXA168_SSP1, 4, 0); +static APBC_CLK(ssp2, PXA168_SSP2, 4, 0); +static APBC_CLK(ssp3, PXA168_SSP3, 4, 0); +static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); +static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APMU_CLK(nand, NAND, 0x01db, 208000000);
@@ -85,6 +90,11 @@ static struct clk_lookup pxa168_clkregs[] = {INIT_CLKREG (&clk_pwm2,"pxa168-pwm.1" ,NULL ),INIT_CLKREG (&clk_pwm3,"pxa168-pwm.2" ,NULL ),INIT_CLKREG (&clk_pwm4,"pxa168-pwm.3" ,NULL ), +INIT_CLKREG (&clk_ssp1,"pxa168-ssp.0" ,NULL ), +INIT_CLKREG (&clk_ssp2,"pxa168-ssp.1" ,NULL ), +INIT_CLKREG (&clk_ssp3,"pxa168-ssp.2" ,NULL ), +INIT_CLKREG (&clk_ssp4,"pxa168-ssp.3" ,NULL ), +INIT_CLKREG (&clk_ssp5,"pxa168-ssp.4" ,NULL ), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), };
@@ -132,3 +142,8 @@ PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE,
0xd401a400, 0x10);
PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10); PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10); PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
+PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53); +PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55); +PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57); +PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59); +PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
(quoted diff) +0 -0
b/arch/arm/plat-pxa/include/plat/ssp.h
index fc83ba7..06cffae 100644
arch/arm/plat-pxa/include/plat/ssp.h +2 -0
@@ -14,6 +14,7 @@* PXA26x SSP, NSSP, ASSP * PXA27x SSP1, SSP2, SSP3 * PXA3xx SSP1, SSP2, SSP3, SSP4 +* PXA168 SSP1, SSP2, SSP3, SSP4, SSP5 */ #ifndef __ASM_PLAT_SSP_H
@@ -27,6 +28,7 @@ enum pxa_ssp_type { PXA25x_SSP,/* pxa 210, 250, 255, 26x */ PXA25x_NSSP,/* pxa 255, 26x (including ASSP) */ PXA27x_SSP, + PXA168_SSP, }; struct ssp_device {
arch/arm/plat-pxa/ssp.c +1 -0
@@ -465,6 +465,7 @@ static const struct platform_device_id ssp_id_table[] = { { "pxa25x-ssp", PXA25x_SSP }, { "pxa25x-nssp", PXA25x_NSSP }, { "pxa27x-ssp", PXA27x_SSP }, + { "pxa168-ssp", PXA168_SSP }, { }, };
Signature · 1 line
1.5.6.5