input: enable touch on 88pm860x
PATCH 1/1 input: enable touch on 88pm860x
Signed-off-by Haojian Zhuang <[email protected]>
--- drivers/input/touchscreen/88pm860x-ts.c | 222 +++++++++++++++++++++++++++++++ drivers/input/touchscreen/Kconfig | 7 + drivers/input/touchscreen/Makefile | 1 + 3 files changed, 230 insertions(+), 0 deletions(-) create mode 100644 drivers/input/touchscreen/88pm860x-ts.c
(quoted diff) +0 -0
b/drivers/input/touchscreen/88pm860x-ts.c
new file mode 100644
index 0000000..b65ef13
drivers/input/touchscreen/88pm860x-ts.c new file +222 -0
222 lines not on this page · raw message
(quoted diff) +0 -0
b/drivers/input/touchscreen/Kconfig
index 8cc453c..0b06a53 100644
drivers/input/touchscreen/Kconfig +7 -0
@@ -530,4 +530,11 @@ config TOUCHSCREEN_PCAP To compile this driver as a module, choose M here: the module will be called pcap_ts. + +config TOUCHSCREEN_88PM860X + bool "Marvell 88PM860x touchscreen" + depends on MFD_88PM860X + help + Say Y here if you have a 88PM860x PMIC and want to enable + support for the built-in touchscreen. endif
(quoted diff) +0 -0
b/drivers/input/touchscreen/Makefile
index 15fa62c..9180479 100644
drivers/input/touchscreen/Makefile +0 -0
@@ -42,3 +42,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) +=
mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
+obj-$(CONFIG_TOUCHSCREEN_88PM860X) += 88pm860x-ts.o
Signature · 1 line
1.5.6.5