Skip to contentSkip to conversation

No subject

DISCUSSION [email protected] 1 participant 1 message Aug 18, 2013

lore
Share & tools
lore
#0 lore raw

overo/duovero_mux_data.h"

{UART4_RX, (PTU | IEN | M0)}, /* uart4_rx */
{UART4_TX, (M0)}, /* uart4_tx=
*/

I changed "include/configs/omap4_common.h"

#define CONFIG_SYS_NS16550_COM3 UART3_BASE

to read

#define CONFIG_SYS_NS16550_COM3 UART4_BASE

and added the UART4_BASE definition to "arch/arm/include/asm/arch-omap4/oma= p.h":

#define UART4_BASE (OMAP44XX_L4_PER_BASE + 0x6e000)

this should be the correct base address for uart4 from what i understand.

However, it doesn't work. I also tried UART2 which doesn't work either. Onl= y one that works is UART3.

I'm probably missing something critical so I figured i would ask here if an= yone can give me a hint on how it's supposed to be done?

Regards
Daniel Malmquist

--_000_1D33A6D946BFEE4E99E977D33497B6D8A67E7B9CEXDB6ugkthse_--