video: add driver for PXA3xx 2D graphics accelerator
PATCH 1/1 video: add driver for PXA3xx 2D graphics accelerator
This adds a driver for the the 2D graphics accelerator found on PXA3xx processors. Only resource mapping, interrupt handling and a simple ioctl handler is done by the kernel part, the rest of the logic is implemented in DirectFB userspace.
Graphic applications benefit for line drawing, blend, and rectangle and triangle filling operations.
Measurements on a PXA303 using the df_dok benchmarking tool follow, where the value in square brackets show the CPU usage during that test.
Without accelerator:
Fill Rectangle 3.007 secs ( 175.922 MPixel/sec) [100.3%] Fill Rectangles [10] 3.178 secs ( 182.696 MPixel/sec) [100.0%] Fill Triangles 3.023 secs ( 99.232 MPixel/sec) [100.3%] Blit 3.082 secs ( 39.770 MPixel/sec) [100.0%] Blit 180 3.115 secs ( 28.994 MPixel/sec) [100.3%] Blit with format conversion 3.078 secs ( 18.863 MPixel/sec) [100.0%]
With accelerator:
Fill Rectangle 4.377 secs (* 88.433 MPixel/sec) [ 5.9%] Fill Rectangles [10] 5.176 secs (* 87.245 MPixel/sec) [ 0.5%] Fill Triangles 3.025 secs ( 87.437 MPixel/sec) [ 46.6%] Blit 12.177 secs (* 22.250 MPixel/sec) [ 1.3%] Blit 180 8.421 secs (* 32.175 MPixel/sec) [ 4.9%] Blit with format conversion 8.216 secs (* 40.045 MPixel/sec) [ 2.5%]
Signed-off-by Daniel Mack <[email protected]>
Cc Denis Oliver Kropp <[email protected]>
Cc Sven Neumann <[email protected]>
Cc Haojian Zhuang <[email protected]>
Cc Eric Miao <[email protected]>
--- drivers/video/Kconfig | 10 + drivers/video/Makefile | 1 + drivers/video/pxa3xx-gcu.c | 773 ++++++++++++++++++++++++++++++++++++++++++++ drivers/video/pxa3xx-gcu.h | 38 +++ 4 files changed, 822 insertions(+), 0 deletions(-) create mode 100644 drivers/video/pxa3xx-gcu.c create mode 100644 drivers/video/pxa3xx-gcu.h
drivers/video/Kconfig +10 -0
@@ -1832,6 +1832,16 @@ config FB_PXA_PARAMETERS <file:Documentation/fb/pxafb.txt> describes the available parameters. +config PXA3XX_GCU + tristate "PXA3xx 2D graphics accelerator driver" + depends on FB_PXA + help + Kernelspace driver for the 2D graphics controller unit (GCU) + found on PXA3xx processors. There is a counterpart driver in the + DirectFB suite, see http://www.directfb.org/ + + If you compile this as a module, it will be called pxa3xx_gcu. + config FB_MBX tristate "2700G LCD framebuffer support" depends on FB && ARCH_PXA
drivers/video/Makefile +1 -0
@@ -100,6 +100,7 @@ obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o obj-$(CONFIG_FB_PXA) += pxafb.o obj-$(CONFIG_FB_PXA168) += pxa168fb.o +obj-$(CONFIG_PXA3XX_GCU) += pxa3xx-gcu.o obj-$(CONFIG_FB_W100) += w100fb.o obj-$(CONFIG_FB_TMIO) += tmiofb.o obj-$(CONFIG_FB_AU1100) += au1100fb.o
drivers/video/pxa3xx-gcu.c new file +773 -0
773 lines not on this page · raw message
drivers/video/pxa3xx-gcu.h new file +38 -0
@@ -0,0 +1,38 @@ +#ifndef __PXA3XX_GCU_H__ +#define __PXA3XX_GCU_H__ + +#include <linux/types.h> + +/* Number of 32bit words in display list (ring buffer). */ +#define PXA3XX_GCU_BUFFER_WORDS ((256 * 1024 - 256) / 4) + +/* To be increased when breaking the ABI */ +#define PXA3XX_GCU_SHARED_MAGIC 0x30000001 + +#define PXA3XX_GCU_BATCH_WORDS 8192 + +struct pxa3xx_gcu_shared { +u32 buffer[PXA3XX_GCU_BUFFER_WORDS ]; + +bool hw_running; + +unsigned long buffer_phys; + +unsigned int num_words; +unsigned int num_writes; +unsigned int num_done; +unsigned int num_interrupts; +unsigned int num_wait_idle; +unsigned int num_wait_free; +unsigned int num_idle; + +u32 magic; +}; + +/* Initialization and synchronization. +* Hardware is started upon write(). */ +#define PXA3XX_GCU_IOCTL_RESET _IO('G', 0) +#define PXA3XX_GCU_IOCTL_WAIT_IDLE _IO('G', 2) + +#endif /* __PXA3XX_GCU_H__ */ +
Signature · 1 line
1.7.0.3