beagle: use PHYS_OFFSET for boot_params

PATCH New Mika Westerberg 1 participant 1 message Apr 27, 2010

Subsystems (3)

Arm (32-bit) Arm sub-architectures OMAP2+ support

lore

Share & tools

lore

Mika Westerberg

author

2010-04-27 09:59 UTC #0 lore raw

PATCH 1/1 beagle: use PHYS_OFFSET for boot_params

Signed-off-by Mika Westerberg <[email protected]>

---
 arch/arm/mach-omap2/board-omap3beagle.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

arch/arm/mach-omap2/board-omap3beagle.c +1 -1

index 962d377..f4ac649 100644
@@ -468,7 +468,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
-	.boot_params	= 0x80000100,
+	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= omap3_beagle_map_io,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,

Signature · 1 line

1.5.6.5